GE/863/EWS-T-76/2019-20

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified & directed.

Dismantling fencing barbed wire, any type complete all as specified & directed.

Demolition of stone/boulder masonry, built in cement mortar including pillars, arches, quoins etc. but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified.

Demolition of reinforced cement concrete cover slab for MH/Septic tank and removing the debris to a distance not exc 500 M complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for l) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as directed.

Excavation in post holes (or similar holes) in hard/dense soil, each not exceeding 0.50 cubic meter, getting out and removing surplus soil to a distance not exceeding 50 meter and making good surfaces complete all as specified & directed.

Excavation in trenches not exc 1.50 M wide and n exc 1.50 m in depth for foundation and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

M&L for Returning, filling in Hard & Dense soil, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L Removing excavated material n exc. 50m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified & directed.

M&L Plain cement concrete (1:3:6), Type C-2 using 20 mm graded crushed stone aggregates as in foundation filling and mass concrete for embedding fencing posts etc complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation of retaining wall , footing complete all as specified.

M&L for precast PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in bond stone set in cement mortar 1:4 complete all as specified.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping to retaining wall/steps including necessary formwork complete all as specified.

M&L for Plain Cement concrete 1:2:4 ( type B-1) 20mm graded stone agg in surface channels and drains all as completed,

M&L for walling of random rubble masonry ,uncoursed ,well bonded ,bedded and solidly hearted ,built in cement mortar 1:6 complete all as specified.

M&L for walling of random rubble masonry except stone ,uncoursed ,well bonded ,bedded and solidly hearted ,built in cement mortar 1:6 complete all as specified.

M&L for Extra over stone walling up to 40mm for hammer dressing to face stone and dressing of face , bed and joint as specified for random rubble walling uncoursed complete all as specified.

M& L for Pre-cast cement concrete block masonry with solid block exc 10 cm in width type C1 1:3:6 (20 mm graded stone agg) set in CM 1:6 complete all as specified and directed.

M & L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for drains set in CM 1:4.complete all as specified.

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in base of columns, footings complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in columns complete all as specified and directed by Engr-in-Charge.

M&L for Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed in walls complete all as specified.

M&L for raised pointing to RR stone walling with cement mortar 1:3 complete all as specified.

M&L for Rendering 15 mm thick, in cement mortar 1:4, on stone masonry surfaces or surfaces other than fair faces of brick work, finished complete all as specified.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of concrete surface in CM 1:3 finished even and fair complete all as specified and directed by Engr-in-Charge.

M & L 18-20 mm thick Granite(of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type

S&F Mild steel work as in post and struts in fencing posts including cutting tops to shape as directed, drilling holes notching for wire and welding etc, flat iron fillets (for securing wire mesh etc), chain link fencing, angle iron for junction of RCC posts & struts etc and similar work complete all as specified and directed.

S&F Mild steel round bar Fe-410 W(grade E-250) quality-A, 10 mm dia and over, cut to length, bent to shape required, in fencing complete all as specified and directed.

S&F Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanized mild steel wire, staples or steel pins, etc. as complete all as specified and directed.

Restraining & resecuring barbed wire fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanized mild steel wire including making good staples etc as complete all as specified and directed (each line wire to be measured)

Supply only chain link MS galvanized fencing, of any size of any type n.exc 4 kg/Sqm complete all as specified.

Fixing only chain link MS galvanized fencing, of any size of any type n.exc 4 kg/Sqm complete all as specified.

S&F MS screw bolts (machine made), 5 to 10 mm dia. of neck, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5 cm long complete all as specified.

M&L Preparation of new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L Preparation of new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying a coat of black bitumen paint complete all as specified & directed.

S&F PVC SWR pipe 110mm dia fixed in retaining wall as spout pipe complete all as specified.

M&L for mild steel deformed bars or TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L 12% nickel coating stainless steel railing to staircase/platform , 75 mm dia newel post incl newel cap as provide end/ turning portion ,50mm dia Balusters fixing necessary interval,50 mm dia top Hand rail & 16 mm dia Bottom hand rail (3 Nos) fixing necessary interval , complete all as specified and directed by Engr-in -charge.

M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S & F TMT bars 8 mm dia in stirrups, spacers and binder complete all as specified and directed by Engr-in-Charge.

S & F Framed work such as hungs of gate , pintle hung, stops, hand made sliding door bolt etc con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Framed work for gate made such as ornamental and intricate design of gate , con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M &L for Spreading and leveling in layers n exc. 25 cm thick Broken stone/ Boulder Aggregate for loose filling, of gauge 80 mm to 150 mm graded well ramming including watering as required

M&L for Formwork square, rectangular sides of pillars, posts, struts, piers, columns and stanchions , complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Add or deduct for each additional 25 mm inner girth over or under 30 cm inner girth of drain or channel,.

Net Contract Sum will be after deducting Sch Of Credit of Rs 127892.00

M/S J.S.ENTERPRISES

M/S H S ENTERPRISES