SPECIAL REPAIR TO INTERNAL ROAD OF POOH GARRISON UNDER GE 863 EWS

Amount

M&L for preparation of old existing black top surface and applying evenly a tack coat of bitumen VG-30 grade confirming to IS :73 at a rate of application of 0.3-0.4 Kg/ Sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and as directed

M&L for applying bituminous premixed semi dense asphaltic concrete (SDAC) 40mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller and vibratory roller, to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'/ BOQ. (ii) In the event of variation in the mix design in the percentage of binder content on minus side, the difference in quantity of binder content will be adjusted through supply only rate at market rate or procurment rate whichever is more for paving bitumen VG-30. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L for Repairs to pot holes any depth, n.exc 30mm and n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal, watering and well ramming but making good by over a priming / tack coat with bituminous primer @ 5 Kg per 10 Sqm,putting in premix asphaltic semi dense concrete as specified by item no. 4 herein after well rammed (including supply of premix asphaltic semi dense concrete) depth of pothole n.exc 30mm complete all as specified and directed

S&F road safety convex mirror made up of polycarbonate relective and body made of ABS/Fibber/Plastic of size 100cm dia including MS pipe 40mm dia of 2.4M length duly powder coated embeded in PCC 1:2:4 of size 45cm x 45cm x 45 cm and excavation earth work all as specified and as directed by Engr-in-charge Make : Gogiya plastic,Cat No: RSCM-100/equivalent of Tata/3M

S&F for High intensity prismatic dual direction twin reflector delineator having two 110 mm dia red coloured HIP intensity reflectors along with three additional HIP red reflectors 25x75mm over 300x165 oval shaped steel sheet 18 gauge head supported over steel tube 47mm dia of 18 gauge steel support of total height 1000 mm having flared/welded foot for firm grip to base, steel parts powder coated to make all weater resistance complete all as specified.

S&F for Duel direction 30 degree angle high intensity reflective cat eye double moulded of impact resistance ABS plastic stud 90x115x16 mm plane base having ultra violet resistance colour (White / Red / Yellow) having micro cube corner spark glow PC reflector White / Red / Yellow for fixing with bitumen adhesive complete all as specified.

M&L for preparation of road surfaces and applying thermoplastic reflective paint for marking of minimum 2.5mm thick single coat as in centre line and edge line, zebra crossing, stop lines etc., road marking of 150/100mm width using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be conforming to BS- 6086 of MORTH specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacturer's instructions and as directed. Notes:- Thermoplastic Road marking Materials shall have the higest quality of raw materialts to provide long life and excellent visibility even after extended use and comply with MOST 803.4.2 (MoRTH 803) or any latest provision of MoRTH to be applicable, BS 3262:1989,BS EN 1871:2000, AASTHO M249,AS 1742.2,SLS 1384:2009 specification.

H.S. Enterprises