Repair to floor,plaster, joinery,flooring, ceiling, sanitary fitting, painting, sewage line, path, drain and internal electrification etc of JCOs/ORs Accn at Cheerbagh and Lower Camp under AGE B/R-II of GE Dehradun

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc. 1 Sqm each and removing from site complete all as specified and directed.

M&L 30mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.

M&L 30mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.

M&L for 35 mm thick, factory made flush shutters BWR, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified in SSR Part 8.25 and Directed as per IS 2002 Part-I 1999

M&L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. with sash bar, edges of framing moulded, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.

S&F 2nd class hard wood Plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints complete complete all as specified and directed.

S&F Factory made solid panel fiber reinforcement plastic (FRP) door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part II.

S&F solid panel fiber reinforcement plastic (FRP) door frame of size 90mmx45mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet,PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing.

S&F 18/19mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and wooden leaping allround the shutter including taking down complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges, MS handles, tower bolts, peg stay etc complete with glazing bars welded with one shop coat of primer, fixed in repair, complete all as specified and directed.

S&F factory madesteel windows with side hung shutters including box type hinges, MS handles, tower bolts, peg stay etc complete without glazing bars welded with one shop coat of primer, fixed in repair, complete all as specified and directed.

S&F factory madesteel windows or ventilatrs, fixed type with glazing bars , fixed in repair complete all as specified and directed.

Taking down existing projected type hings from the steel window carefully without disturbing frame and S&F 50 mm long mild steel box type hinge welded to steel frame and shutter with welding and making good including two coats of synthetic enamel paint over a coat of primer to match the existing surfaces . The work shall be executed at site up to the three storeyed bulding, the rate of scrafholding shall be deemed to be included the quoted rate of this item complete all as specified aand directed by Engr-in-charge

S&F 2nd class hard wood plain fillets sectional area exc 13 & n exc 25 Sqcm, Square or rectangular in section, wrought, secured with nails or barbs, complete all as specified and directed.

S&F mild steel framed work as in grill, grating etc framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing. framed work of water tanks and similar works confirming to Fe 290 Gde E165 complete all as specified and directed.

S&F 100 mm size stainless steel 304 grade butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm size stainless steel 304 grade butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 100mm size stainless steel butt hinges and fixed with stainless steel screw, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts of 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts of 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150mm size solid in one piece stainless steel handles 202 grade bright finish D type and fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel handles 202 grade bright finish D type and fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

S&F 300mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed.

S&F in repairs 300mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed.

S&F hasp and staple 100mm safety type, stainless steel gde-202 with hinge pin including bolt to hinge plate and fixed with screws ,complete all as specified and directed..

S&F floor door stopper of stainless steel 50mm size double legged and tongue, 202 grade bright finish , with hard drawn steel spring, fixed in floor all as specified and directed by Engr-in-Charge..

S&F continuous (piano) hinges, stainless steel 202 grade, bright finish with width of flap (when open) 30 mm complete all as specified and directed.

S&F magnet catcher for cub board with brass body and striking plate including letting in, complete all as specified and directed.

S&F 250 mm long stainless steel 202 grade bright finish sliding door bolt (bolt type, dia of bolt 16mm) with hasp, staple , fixing clips, fixing bolts and sliding bolt of stainless steel and fixed all as specified and directed by Engr-in-charge

S&F in repairs stainless steel peg set of five with cromium plated back plate 202 grade,40mm wide fixed with chromium plated screw, complete all as specified and directed.

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed by Engr-in-Charge.

M & L sheet glass ordinary quality 4 mm thick figured glass, pin head type and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones.

S&F Stainless steel 304 grade wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle all as directed by Engineer- in -Charge.

S&F in repairs Stainless steel 304 grade wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle all as directed by Engineer- in -Charge.

M&L for 1st class hardwood beads, straight (any size) for fixing mild steel wire cloth, renewed , including mitres etc complete all as specified and directed by Engineer-in-charge .

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick , decorative, including brackets, decorative finials at both ends complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level) and disposing off debris out side M o D land, complete all as specified and directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises as directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.11sqm but n.exc 0.18sqm in floor etc, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match including screed bed 15mm thick in CM (1:6) complete all as specified and directed..

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm x 7mm thick over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigment to match the surface,complete all as specified and directed..

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) as in skirting cut from tiles exc 0.11 Sqm but n exc 0.18 Sqm of size and shade as provided in floors, set and jointed in neat cement slury and pointed in white or coloured cement to match including screed bed 10mm thick in cm (1:4) all as directed including dismantling of tiles complete.

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed..

Cutting the existing floor tile with cutter machine carefully without disturbing existing tile inlcuding materials and labour 15-18mm thick dark z black granite fixed on floor with chemical including cutting door edges complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

M&L rendering 10 mm thick in CM (1:4) on ceiling of concrete surfaces, rendering is to be finished even & fair without using extra cement , complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 in two layers (10-12 & 5-3 mm thick)on walls (fair / unfair finished faces of brick/concrete), finished even and smooth without using extra cement complete all as specified. (Water proofing compound where ever required, will be measured and paid separately)

M&L rendering 15mm thick in patches n exc 3 Sqm in cement mortar (1:4) on fair faces of brick/ concrete surfaces of wall, finished surfaces even and fair without using extra cement. (Water proofing compound where ever required, will be measured and paid separately)

M&L rendering 10mm thick in patches n exc 3 Sqm in cement mortar (1:3) on fair faces of brick/ concrete surfaces of chajja/ facia, finished surfaces even and fair without using extra cement. (Water proofing compound where ever required, will be measured and paid separately)

M&L for rendering 10mm thick in cement mortar 1:6 on internal surfaces of walls, finished even and smooth without using extra cement complete all as specified. (Water proofing compound where ever required, will be measured and paid separately)

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornies, skirtings, drip moulds and similar work exc 15cm but n exc 30cm in width or girth, inclluding cutting to edges all mitres and stopped ends etc complete all as specified and directed.

Supply only liquid water proofing compound Dr Fixit / Forsoc complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces ,complete all as specified and directed..

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specifed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of suitable primer for cement base paint on walls, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4 mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32 mm made of 0.30 mm sheet 1200 mm long spaced between main "T" at 600 mm c/c to form a grid of

Item No 67.00 contd. 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at any height as per direction of Engineer-in-Charge.

Taking up or down steel tubing and connections and removal from site with all fittings for 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections and removal from site with all fittings for 20 mm bore complete all as specified and directed.

Refixing of old GI tubing 15 mm bore in new or old position including cleaning/cutting/ threading with all new fittings to floor, wall or ceiling as directed, for .(Old pipe obtained from taking down shall be re-used)

Refixing of old GI tubing 20 mm bore in new or old position including cleaning/cutting/ threading with all new fittings to floor, wall or ceiling as directed, for .(Old pipe obtained from taking down shall be re-used)

M&L cutting chases not exc 10cm girth, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing etc and making good cutting .

S&F 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 08 Litr Dual capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long bend for out let, fixing with WC complete all as specified and directed by Engr-in-charge (Make commander/Cera/Hindware/pearl).

S&Fin repair PVC connection 15mm size 450mm long with PTMT nuts, complete all as specified and directed.

Dismantling water tank exc 500 ltr and not exc 1000 ltr Capacity and incl fixtures/ fittings, taking down from roofs (any height) complete all as specified and directed.

S&F triple layer external white 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with threaded cover hoisted and fixed in position all as specified in SSR Part I including 20 mm PTMT float valve with PVC ball complete all as specified and directed by Engr-in-charge

S&F in repair vitreous china wash hand basin with brackets, white, size 550 x 400 mm including CP brass 32mm waste fitting with long screwed shank and fly-nut, 32 mm PVC waste pipe including cutting for and pinning in ends of brackets complete all as specified. Make: Jaquar CNS WHT 801/ Parryware CO460/ Hindware 10010

S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.Make : Jaquar Cat Part No VGP 81001/Hindware Cat Part No F370001/Parryware Cat Part NoG9802A1

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long 'P' trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge. Make- Jaguar Essco cat No-CNS-WHT-451/ Prayag cat No- 4054/ equivalent in Hindware/ parryware as approved by GE.

S&F in repairs ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms)

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed. Make:- Hindware Cat No 20044/ Jaquar Cat No. ECS-WHT-555N

S&F in repair 15 mm bore bib tap, short body brass chromium plated fancy type with round headed knob screwed down, screwed for iron pipe complete all as specified and directed. Make:- Jaquar CON 047KN/Parryware G3304A1/Hindware F200003.

S&F in repair15mm bore Angle Stop valve, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make: Jaquar Cat Part No FON-40053/ Hindware Cat Part No F160017/ Prayag Cat No 9410.

S&F in repair brass chromium plated shower rose 100 mm dia with CP arm, suitable for 15mm dia GI pipe. Make:- Prayag cat No-BHS-85 or equivalent in Jaquar/ Hindware .

Taking down CI/AC/PVC rain water pipes and fittings upto 110mm dia and removing from site.

S&F 100mm dia cast iron soil waste and vent pipe (spun pipe) as per IS 3989 in any length with or with ears, with cement joints laid in trenches or in floors complete all as specified.

S&F 100mm dia cast iron soil waste and vent pipe (spun pipe) as per IS 3989 in any length with or with ears, with cement joints but fixed on wall with existing MS clamps, complete all as specified and directed by Engr-in-charge.

S&F 75mm dia cast iron soil waste and vent (spun pipe) as per IS3989 in any length with or without ears, with cement joints laid in floors complete all as specified.

S&F 75mm dia cast iron soil waste and vent (spun pipe) as per IS3989 in any length with or without ears, with cement joints fixed on wall with existing clamps complete all as specified and directed.

S&F cast iron bend (spun bend) as per IS 3989 any radius for 100 mm dia pipe dia with duck 's foot or heel rest fixed with cement joint complete all as specified and directed.

S&Fcast iron bend (spun bend) as per IS 3989 any radius for 75 mm dia pipe with duck 's foot or heel rest fixed with cement joint complete all as specified and directed.

S&Fcast iron branch pieces of 100mm bore , (spun) single (equal or unequal) as per IS 3989 ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors fixed with cement joints complete, Complete all as specified and directed.

S&Fcast iron branch pieces of 75mm bore , (spun) single (equal or unequal) as per IS 3989 ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors fixed with cement joints complete, Complete all as specified and directed.

S&F 100mm dia CI cowls (spun) as per IS 3989 complete all as specified and directed .

S&F 75mm dia Cast iron floor trap (spun) with grating as per IS 3989 including jointing to waste pipe set in cement concrete type B-1(1:2:4) complete all as specified.

S&F in repairs for 75mm bore dia pipe Stack clamps made out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof

S&F in repairs for 100mm bore dia pipe Stack clamps made out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof

S&F 32/40 mm bore PVC waste pipe with coupler for WHB/ sink with min length 80 cm, complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel Grating round with steel frame and hinge of 100mm dia complete all as specified approved by Engr-in-Charge.

Cutting around the pipe 75/100mm bore waste / soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in epoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

Removing / cutting trees vegetation, digging out roots from concrete or brick wall, filling holes on building (Block of 4 qtrs) wall / roof / chajja etc applying and making good with epoxy mortar (Asian/Berger) and applying surface treatment to match with existing specifications complete.

Taking down existing plaster from the roof surface including existing treatment and M&L 15mm thick cement plaster in cement (1:3) on concrete surface finished even and smooth with using extra cement and water proofing compound (water proofing cement will be paid separately) complete all as directed by Engr-in-charge.

M&L for applying evenly a tack coat industrial bitumen 85/25 at the rate of 1.20 Kg Per Sqm including cleaning of roof surface complete all as directed by Engr-in-charge.

M&L for one coat of aluminium bitumen paint @ 0.30 litres/Sqm on the roof surface complete all as directed by Engr-in-Charge.

M&L for preparation of old decoratied surface of wall (plastered) by brooming down with coir brush and hand held electrical grinder, scraping down smoke soot, moulds, moss and efflorecent salts and trading oil and grasy spots and finally cleaned with sand paper all as directed by Engr-in-charge

Complete removal of existing treatment of wall upto the plastered surface of wall by brooming down with steel wire brush and hand held electrical grinder, scraping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots and finally cleaned with sand paper all as directed by Engr-in-charge

M&L preparation of old decorated plastered surfaces of ceiling by brooming down or sand paper , scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

M&L for applying one coat of white wash on old decorated already prepared surfaces of walls complete all as specified and directed by Engr-in-charge.

M&L for applying one coat of white wash on old decorated already prepared surfaces of ceiling complete all as specified and directed by Engr-in-charge.

M&L for applying one coat of oil emulsion distemper on old decorated already prepared surfaces of walls complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered / POP / Putty surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed by Engr-in-charge

M&L applying one coat of cement base paint on old decorated already prepared external surfaces of walls complete all as specified and directed by Engr-in-charge. (Curing shall be carried out before and after application of paint using spray pump manualy operated as directed by Engr-in-charge)

M&L applying two coats of cement base paint on old decorated already prepared external surfaces of walls complete all as specified and directed by Engr-in-charge. (Curing shall be carried out before and after application of paint using spray pump manualy operated as directed by Engr-in-charge)

M&L for applying wall putty interior grade, 2 to 3mm thick on walls to make the surface smooth complete all as specified and directed by Engr-in-Charge.

M&L for preparation of wall by applying exterior grade wall care putty , 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L applying one coat of whether proof exterior emulsion paint on old decorated already prepared external surfaces of walls complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered / POP / Putty surfaces of walls and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed by Engr-in-charge

Preparation of old AC sheets surfaces of any description by brooming down with steel wires brushing and washing with water and applying one coat of Apex paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified and directed by En gr-in-Charge.

M&L for preparation of old painted surfaces of wood of any description over 10 cm width/girth and applying one coat of synthetic enamel paint , complete all as specified and directed by Engr-in-charge.

Writing building Nos. with letters or figures (Block. Roman, Italic or Indian) 15 cm high all as specified and directed by Engr-in-Charge.

Cleaning of existing PVC/RCC water storage tank with vaccum cleaner machine exc 250 to 500 ltrs capacity cleaning with R2 chemical (Taski) and dry with and apply on coat of anti bacterial spray (R1 Taski) as directed by Engr-in-charge. Date of cleaning to and CA No to be painted on water storage tank with stencil in black/ white synthetic enamel paint all as directed by Engr-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out including removing of excavated material/soil upto 100m complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for 60 mm thick vibromatic reinforced precast cement concrete 1:1:2 (using 20mm graded stone aggregate) with 2mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed by Engr-in-charge (Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will carried out with ponding method)

S&F TMT MS bar 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .

M&L for Cleaning of existing sewage pipe lines 100/150/200mm internal dia at any depth through manholes by removing the manhole covers, by means of hydraulic jet pressure machine or manually as required at site, getting out sludge and liquid materials from connecting manholes and sewar line, flushing with water after cleaning, reinstating the manhole cover to the original postion and removing the solids and sludge out of MD land complete all as specified and directed. (Note: Cost of removal of sludge/liquid material from sewage lines and manholes in same line is included in rate of this item. A particular sewage line which is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repitetive cleaning if required )

M&L for dewatering and desludging of septic tank / soakage well of any size and depth by mechanical pumping by plugging inlet as requried, including effluent, solids and sludge out of MD land includind removing the manhole covers and reinstating to its original postion complete all as specified and directed by Engr-In Charge. (Note: A particular septic tank / soakage well which is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repitetive cleaning if required)

M&L for Cleaning of blockage of Floor traps / Gully traps of bathroom / kitchen by getting out all the mud / sludge, cleaning of sewage pipe upto gully trap / first manhole and deposting the sludge in burrow pits of suitable size to a distance as directed and covering the same with the soil obtained from excavation of pit including all excavations and earth work complete all as specified and directed by Enge-In -Charge. (Note: A particular trap which is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repitetive cleaning if required)

M&L for Cleaning of blockage of WC indian or European type by getting out all the mud / sludge, cleaning of sewage pipe upto first manhole and deposting the sludge in burrow pits of suitable size to a distance as directed and covering the same with the soil obtained from excavation of pit including all excavations and earth work complete all as specified and directed by Enge-In -Charge. (Note: A particular WC which is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repitetive cleaning if required)

Cleaning of CI/PVC stack pipes of any dia upto ground floor along the wall and gully trap and Ist manhole including rodding and deposting the sludge in burrow pits of suitable size to a distance as directed and covering the same with the soil obtained from excavation of pit including all excavations and earth work complete all as specified and directed by Enge-In -Charge. (Note: A particular pipe which is undertaken once for cleaning and paid for shall be kept functional for entire contract period and no extra payment shall be made for repitetive cleaning if required)

Cleaning of man holes of any depth and size including clearing the mouth of outlet/inlet pipes, by taking out accumulated soil, sludge etc mechanically and removal out of MD land and refixing manhole cover all as directed by Engr-in-charge.

Pumping out sewage water from the man holes / septic tank / soakage well at different locations by means of sewage tanker fitted with pump (5000 ltr capacity) and disposing off out of MD land as directed by Engr-in-charge .

Notes for Item Nos 130 to 136 (a) Contractor shall provide printed complaint register/slip as per format given by Engr-in-Charge before commencement of work. (b) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints. In case contrctor's representative fails to report Rs 450/- will deducted from the contractor payment for the absent period. (c) Complaint slips shall be deposited to the JE concerned after completion of job duly signed by the users. Payment shall be made on the basis of complaint slips and site verification by JE / Engr-in-Charge.

Taking down carefully copper/ aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed.

M&L for Point wiring with 1100 Volts grade 1.5 Sqmm (nominal area) PVC insulated but unsheathed multistranded copper conductor single core FRLS cable and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly, drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed steel junction box of thickness 1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, complete all as specified and directed by Engr.-in-charge of following. Note:- Wire/cable colour coding shall be maintained properly as per IE rule. (Make of conduit & accessories- Precision/Polycab/AKG, Make of wire- Polycab/L&T/KEI)

(a) One light point / bell point / exhaust fan point controlled by one, one way switch

(b) One ceiling fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No.138.00 here in above but with 2.5 Sqmm (nominal area) wire/cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

M&L for point wiring with 1100 Volts, grade 1.5 Sqmm. (nominal area) FRLS,PVC insulated, unsheathed multistranded copper conductor cable, single core, drawn through existing rigid PVC concealed conduit/steel conduit fittings but including pressed steel junction box of thickness 1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, for fixing switches socket/regulator etc. including 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated unsheathed multi stranded copper conductor cable as earth continuity conductor upto common earth and connected to earth dolly complete all as specified and directed by Eng.-in-charge of following. Note:- colour code of cable shall be maintained properly as per IE rule.

(a) One light / bell point / exhaust fan point controlled by one-one way switch through Regulator.

(b) One ceiling fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on independent board

All as per item No.140.00 here in above but with 2.5 Sqmm (nominal area) wire/cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F of switch piano flush, button type 5 Amps SP complete all specified.

S&F of switch piano flush button type 15 Amps SP complete all as specified & directed.

S&F of socket outlet multipurpose 3 pin 5 amps and 2 pin 5 amps, complete all as specified and directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete all as specified & directed.

S&F lamp holder,PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified & directed.

S&F bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

S&F step type electronic fan regular120 watts,240 volts, 6 Ampds complete all as specified.Make HPL/Havells/SSK

S&F Bell Ding dong 250V AC complete all as specified & directed. Make: SSK/Leader/Anchor.

Excavation in trenches, not exc. 1.50m wide and not exc. 1.50 m in depth, for foundation, Manhole, etc. and getting out in any type of Soil, complete all as specified and as directed.

Returning, Filling in, including spreading,levelling, watering and well ramming in layers not exc. 250mm in any type of soil, complete all as specified and as directed.

Removing excavated materials (soils) to a distance exc 50 but n exc 100m complete all as specified and directed.

S&F in replacement wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Wipro Cat part No LL20-281-XXX-65AL1/ Philips cat part No BN021C LED20S PSU CWGR S2/Havells Cat No ENDURA LINEARNEOBS20W LED840SPCWH.

S&F in replacement mirror light decorative compact luminarious with decorative ends caps 9/10 watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells E-lite Pride LHEXBLP7IN1W009 or equivalent in Philips/ Wipro.

S&F in replacement Decorative Square/Round surface mounted LED flat panel PDC aluminium housing and PMPA diffuser makes it a robust Luminaire 12 Watts PF 0.9 and above operating voltage 150V-300V colour temp 4000K & lumen input output 70 Lumen per watt incl provisioning of 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to light connector complete all as specified and directed by Engineer-in-charge Make : Crompton cat part No LCDN-12-CDL/TL/WW/Wipro cat No LD80-101-XXX-60-XX/Philips Cat No DN092B LED10S-3000-PSU-WH

S&F in replacement Decorative wall mounting light fixture made up of Polycarbonate suitable for LED lamp 15 watts including lamp complete all as specified and directed by Engineer-in-charge Make : Havells(City -1) cat part No LHDL02160099 fitting & LHLDERHEMD8x010(lamp) or equivalent in Wipro / Philips/Mepro.

S&F in replacement Energy saving Bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watts complete all as specified and directed by Engr-in-charge. Make : Philips/CG/Mepro

M&L in replacement for new generation energy saving and environmental friendly long life Street light luminaire Endura Pearl Neo comprising of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separete driver compartment with IP-66 protection and impact resistance of IK07 with separete surge protection 5KA, 40 watts or near higher size with making all arrangement for fixing light fitting such as replacement of GI bracket made of 40 mm bore medium grade pipe made to shape of 120 degree of 70 cm and 50 cm to a overall length of 120 cm for fixing of street light fitting including MS clamps of size 32x3 mm flat iron, nut & bolts and washer of required size,painting complete with all necessary electric connection etc all as specified and directed .Make - Havells cat No - ENDURAPEARLNEOSL40WLED757PASYTOPC/ CG cat No- LSTP-45-CDL/ Philips cat No- BRP046LED36CWMRS1PSUGR / equivalent in Crompton.

S&F in replacement TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 160 Amps four pole 415 volts as incomer including connection terminal strip complete and SP or SPN MCB's as out going etc complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge Make: Legrand/L&T/Indo Asian.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door 12 way IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going, mounting flush on wall/concealed complete all as specified and directed by Engr-in-charge. Make: Legrand/L&T/Indo Asian.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door 8 way IP-43 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going, mounting flush on wall/concealed and making good distubed surfaces complete all as specified and directed by Engr-in-charge. Make: Legrand/L&T/Indo Asian.

S&F MCCB 125 Amps four pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 16 KA including connection terminal strip complete all as specified & directed Make:Legrand/L&T/Simens.

S&F MCB SPN 240 Volt 10 KA 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand/L&T/Simens.

S&F MCB single pole 240 volt, 10 KA, 40 Amp, 'B' series confirming to IS complete all as specified and directed. Make: Legrand/L&T/Simens.

M&L in replacement Sub main wiring P+N+E with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly, drawing in and including 20 mm dia or higher medium duty PVC concealed conduit / PVC conduit on wall and conduit accessories and fittings complete all as specified & directed. (Make of conduit & accessories- Precision/Polycab/AKG, Make of wire - Polycab/L&T/KEI)

M&L in replacement Sub main wiring P+N+E with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly, drawing in and including 25 mm dia or higher medium duty PVC concealed conduit / PVC conduit on wall and conduit accessories and fittings complete all as specified & directed. (Make of conduit & accessories- Precision/Polycab/AKG, Make of wire - Polycab/L&T/KEI)

Supply and fixing wall mounted type sheet metal single pole and neutral enclosure with a two pin and earth plug and socket complete with and including MCB SPN 20 Amp 'C' series 10 KA mounted on DIN rail channel and suitable plug complete all as specified and directed by Engr-in-charge Make: Legrand Cat No 5078 14 or eqvt in L&T /Simens. (Note : Item rate including all items ie base box, plug, socket , MCB etc complete)

Supply and laying in replacement under ground cable, nominal cross sectional area 16 Sqmm, 4 core,1100 Volts grade, XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge. Make of Cable : KEI / Havells/ Polycab/ Grandlay.

Supply and laying in replacement under ground cable, nominal cross sectional area 25 Sqmm, 4 core,1100 Volts grade, XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge. Make of Cable : KEI / Havells/ Polycab/ Grandlay

M&L for sand cushioning in trenches for protection of UG cable with river bed sand laid dry in trenches before and after laying of cable, including well ramming and consolidation complete all as specified and directed. (Note:- punned thickness shall measured)

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat across the length of cable laid dry for protection of under ground cable complete all as specified and directed.

Supply and laying in replacement GI steel tubing medium grade 50 mm bore including all fittings, laying in trenches or grouting/fixing in wall for protection of cable complete all as specified and directed by Engineer-in-charge Make : Surya parkash/TATA/Swastik

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium grade 15 mm bore and water pipe 20 mm bore GI light grade, with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type C-1 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion. Note: (i) If the earth resistance is not found within permissible limit earthing shall be redone by contractor at no extra cost. (ii) Cost of GI wire and protection pipe upto 7.5 mtr is included in the rate quoted for this item

S&F in replacement of U/S Tamper Proof electronic single phase whole current energy meter (LCD Display) 10 Amp to 60 Amp, 240 class 1.05 and 2.05 volt AC supply including cable connection, proper sealing with lead. The meter shall comply with the latest version of IS-13779 with atleast 2 anti tamper LED of line load reversal and earth loading indication with lead indication including eletrical connection with existing system and sealing properly including push fit type pvc box. The meter shall work satisfactory with guarantee accuracy as per limit of IS-13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. (Note: Old U/S Meter shall be deposited to E/M store yard). Make:- L&T/Secure/BHEL.

S&F in replacement meter distribution board made out of thermoplastic polycarbonate of size 600x600x170mm (dust,weather,shock,rust proof,corrosion & halogen free, acid & UV resistance and free cyclable material) with 230 v AC, 50 HZ, 3 wire, gasket shall be embaded with T- locking arrangement and suitable for mounting of electronic meter - 04 Nos including electrical connection with existing system and sealing properly complete all as specified and directed. Make - Hensel cat pt No-Mi0800/ equivalent in Secure/ Sintex.

Supply only fan capacitor 2.5 mfd ,complete all as specified and directed. Make - Universal/Havells/Epcos.

Supply only fan capacitor 4.0 mfd ,complete all as specified and directed. Make - Universal/Havells/Epcos.

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI of suitable size as directed and with heavy duty rubber insulator and two nos nuts and one bolts including split pin complete all as specified and directed.

Supply and fixing in replacement, louvers shutters round or square, made out of GI sheet suitable upto 300 mm dia exhaust fan ,complete all as specified and directed.

Supply and fixing in replacement, water heating element any type (Triangle/Box/Cup) of size as per site requirement of capacity upto 2KW ISI marked complete all as specified and directed. Make - Newton/Jaquar/Bajaj/Theeta.

Supply and fixing thermostat for geyser long type 11" in length or as per site requirement ,temperature setting on 60 degree centigrade, ISI marked, long type ,complete all as specified and directed. Make - Newton/Jaquar/Bajaj/Theeta.

S&F three core PVC insulated flexible and over all PVC round cable of size 40/0.0060 with multi stranded copper conductor complete all as specified and directed. Make - KEI/Polycab/Havells.

S&F in replacement of water supply PVC flexible connection Nylon braided suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45/60 cm long complete all as specified and directed. Make:- Polytuf /Havells/Prayag /crompton.

Asian Builder

Saurav Enterprises