Annual rate contract for General maintenance of Offices Under Anand Rural Division office

Madhya Gujarat Vij Company Limited

Name of Work: Annual rate contract for General maintenance of Offices Under Anand Rural

Division office.

SN DESCRIPTION Rate UNIT Code

Demolition & Dismatalling

Demolition including stacking of serviceable materials and

1 disposal of unserviceable materials with all lead and lift. (i) 1071.63 CMT

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Dismentaling tiled of stone floors laid in mortar including

3 stacking of serviceable materilas and disposal of 48.63 SMT

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.(ii)

A.C. sheet roofing

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking

of serviceable material and disposal of unserviceable from

site of work with all lead and lift

Scraping oil paint from steel and other metal surface and

making the surface even (with Hand Scraping.)

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,holdfasts

7 and other attachment etc. complete and stacking them 190.19 No 20013A

within all lead and lift.(i) Not exceeding

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismentling steel work including distempering and

stacking the materials with all lead and lift.

Dismentling barbed wire in fencing including making rolls

and also including dismentling fencing posts including all

earth work concrete in base and making good the

disturbed ground stacking useful materials as directed and

disposing as directed and disposing of the unserviceable

materials with all lead and lift.

Dismantling santtary fittings like wash basin . W.C. pan

11 Indian and European type, flushing tank etc. including 410.13 NO

stacking the materials with all lead and lift.

Throwing away debried and unwanted material away from Approve rate RMU

12 site at suitable locations by means of tractor and trailer trip 700.00 Each Plinth BCC item

upto any lead & lift. no.13

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

SN DESCRIPTION Rate UNIT Code

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Filling in foundation and plinth with murrum or selected

15 soil in layers of 20cm. thickness including watering, 291.47 CMT 04008A

ramming and consolidating etc. complete.

Filling in plinth with sand under floors including watering

ramming, consolidating and dressing complete

Filling in foundation and plinth with brick Bats Chhara in

17 layers of 20cm. thickness including watering, remming and 615.31 CMT 04009A

consolidating etc. complete.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Collecting, Carting and unloading materials like crushed

stonegreet, chipping, quarry spill,/grit, etc of appd.Quality

19 from quarry and spreading in required layers leveling 1100.00 CMT

etc.camber etc.complete with all lead and lift as directed

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

20 aggregates 40 mmnominal size) and curing complete 3064.60 CMT 05003A

excluding cost of formwork in (A) Foundation and

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of 05024AA+350

21 formwork and excluding reinforcement for reinforced 4361.78 CMT

concrete work in (A) Foundations, footings, Base of

columns and Mass concrete

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

formwork and excluding reinforcement for reinforced 05024CA +

concrete work in (C) Slabs,landing,shelves,Balconies for formwork

Lintels, Beams, Girders and Cantilever upto floor

Providing TMT Bar FE 500D reinforcement for R.C.C.

23 work including bending, binding and placing in 76.52 KG 05014C

complete upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand)(B) Conventional

. - Do as above - but for Brick work in superstructure

25 above plinth level up to floor two level including parapet/ 4481.99 CMT

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in 06008A2A+06008

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in E2A

superstructure above floor two level Coventional

SN DESCRIPTION Rate UNIT Code

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement :

5 -fine sand)(C) Fly Ash Bricks

. - Do as above - but for Brick work in superstructure

28 above plinth level up to floor two level including parapet/ 5351.69 CMT 06001CA+06006C

ii) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

PProviding 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

finishing with a floating coat of neat cement slurry.

Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

Extra over above items for finishing with a floating coat of

neat cement slurry.

Extra over above items for plastering on ceilings and sofits

of stairs upto floor two level instead of plastering on walls.

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

34 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 348.95 SMT.

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

Providing & fixing granite in flooring, riser and Treads of

steps, partition for drinking water, moulding the edges and

grooving if directed, of size not less than1200mm in length

35 3000.00 SMT renovation item

and full width of treads in C.M.1:2 neatly finishing the

joints, curing etc. comp as directed by EIC.

Labour charge for providing river sand polishing to kotah

36 stone / granite of required finishing as directed by EIC 250.00 SMT

including all tools tackles labours etc complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for antiskit Shade. Basic rate of tile is Rs.

Providing and laying coloured glazed tiles of the size

skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

cement slurry. Basic rate of tile is Rs. 60/Sqft

SN DESCRIPTION Rate UNIT Code

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and

40 as per approved design Confirming to IS 15658 : 2006 699.93 SMT

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Removing & re-fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

41 mechanically and as per approved design Confirming to 322.81 SMT 14033 - M910

IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

Providing China Mosaic water proofing treatment in

Terrace of different levels preparing roof surface for laying

brick bat on cement mortar (1:4) with special water

proofing composed in necessary gradient for easy flow of

rain water, brick bat coba is finally covered by China

Mosaic Tikdi fixed by white cement base added with

special water proofing compound. The treatment is carried

along the vertical surface of the parapet and other joining

wall up to height of about 300 mm in a shape of quarter

round vata. The average thickness of the water proofing

42 treatment is about 140 mm. Minimum thickness at rain 1348.52 SMT 14019A+

water outlet points being 75 mm including curing etc.

complete as per specification and instruction including

water proofing test for minimum 3 days etc., complete as

directed by E. I. C. Contractor should give guarantee for

water proofing for 5 years. All the material including

cement should be brought by the contractor at his own

cost. 10% Amount will be kept with company during

guarantee period.

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-

44 cement : 6-coarse sand) or L.M. 1.1.5 laid over and 1098.09 SMT 14012BA

jointed with grey cement slurry including rubbing and

polishing etc. complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

SN DESCRIPTION Rate UNIT Code

Wood & Glass Work

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

46 spacings and frame alround, square or round bars with 105.18 KG 10025AA

round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc,

complete. (i) Fully Glazed.

Providing and fixing 35 mm thick Decorative type Water

proof flush door shutters, solid core construction with

wood frame with Polish of first class hard-wood with cross

band and face ply-wood face panels, 1.0 mm thick

48 laminate on both sides including Stainless steel fixtures 4000.00 smt

and fastening like tower bolt, stopper including for door no.35

shutters sides etc complete. as directed by engineer in

charge.(Measurement Shall be Consider L X H)

Providing and fixing FRP frame size 100x50 mm and

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ

49 alongwith embedded wooden pieces for stiffening & also 2354.22 SMT

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures &

fastenings & fastener sleeve.

Providing services of mason / fabrictor/ carpentaer for

50 791.00 Each L018 SOR

various types works for 08 hrs at directed by EIC.

Providing services of Helper for mason/fabrictor /

carpenter / for maintenance and cleaning for various types

51 593.00 Each L026 SOR

of works for 08 hrs at directed by

Providing and Fixing locks of godrej or equivelant make

incl.All labour & materials as approved and directed by

52 SS Drawer locks 250.00 Each

53 Mortize lock 1400.00 Each

54 Multi Drawer lock 375.00 Each

55 Cylindrical lock 960.00 Each

56 Steel Cupboard lock 661.00 Each

SN DESCRIPTION Rate UNIT Code

Providing and Fixing Acrylic PVC Name plate of Size

12"x4" or as per requirment with printed/emboded letters ARC HO WO.5048

57 13.50 Sq. inch

in required colour including all material and labour as Dt.11.05.23

directed by EIC.

Reparing of revolving chair with approved brand and make

incl. All labour & mateirals as approved and directed by

58 SS Base Stand 1400.00 Each

59 Hydraulic Jumper 950.00 Each

60 Cloth with maderpatt 650.00 Each

61 Wheel 115.00 Each

62 Handle 200.00 Each

Washing of chairs/sofa/curtains, etc. with all required

chemicals, vecume m/c, tools & tackles incl. All labour &

materials as directed by EIC. For Below

63 Revolving Chair 130.00 Each

64 Single Seater Sofa 230.00 Each

65 Two Seater Sofa 460.00 Each

66 Three Seater Sofa 690.00 Each

67 Curtains ( Vertical/Roman/Rollar blinds, etc.) 161.00 Sqm

Reparing of office table with approved brand and make

incl. All labour & mateirals as approved and directed by

68 Drawer handle 120.00 Each

69 5 mm table glass 104.00 Sqf

70 6 mm table glass 115.00 Sqf

71 8 mm table glass 126.00 Sqf

SN DESCRIPTION Rate UNIT Code

72 Powder coated telescopic sliding channel (any size) 1200.00 Each

600mm wide and 450 mm deep wooden keyboard tray

73 made from 19mm thick all weather proof plywood and 1 996.00 Each

mm thick coloured Laminates

Maintenance of existing aluminium windows (to be

removed & refixed) with new ribbons, clear white

gaskets, rollers, handles etc complete with applying silicon ARC HO WO.5048

from outside to restrict the seepage of rain water. Dt.11.05.23

Aluminium sections shall be powder coating of approved

shade and colour after sanding surface as per instruction.

Repairing, Servicing & Refitting the Existing Door as Per ARC HO WO.5048

Site Situation as per Instruction of EIC. Dt.11.05.23

Providing and fixing new frame for wooden door made of

76 teakwood of 3' wide and 7' height including finishing with 2200.00 Each

polish as directed by EIC

Providing & Fixing Godrej or equivalent Door Closer with Baroda circle

77 all tools and 2000.00 NO ladies Rest room

tackles. item no.25

Renovation of Existing storage below sill level with 18 mm

ply top, based on vertical supports made by 18 mm Thk.

Plywood with all necessary shutters & self (made by

mm thk ply) as per given in detail drawings. All exposed

and internal surfaces covered with 1 mm thk approved ARC HO WO.5048

shade laminates as instructed by Architect/Engineer In Dt.11.05.23

charge. Complete with all hardware like MS nails, screws,

magnet, Stoppers, L - hinges, 18 mm multi locks, table

chain, 4" mat finish SS handles etc. Laminates, plywood,

shades & hardware Items shall be approved by EIC.

Roller Blind: Providing and fixing Roller Blind curtain of

greenguard fabric fixed on window level on wooden

batten with curtain lift of ball chain and same color fabric

heavy metal pelmet with white color & box type look, Nadiad CO item

heavy bottom rail and with Eco black-out material with no.98

necessary hardware fitting, material and labour etc

complete. design and colour as per instruction by E.I.C.

(Basic Rate Rs. 110/Sft) inclusive of all material and

labour and with transportation.

Soft Board : Pro & fix soft board panel unit made from 15mm

tk. Soft board & velvet cloth (basic rate 150 rs/smt) teak wood

Undel furniture

80 corner patti, to all over border polishing to t.w. patti, including 1560.00 Sq.mt

fixing with fevicol, nail, etc. complete in size 4'x21" as directed

Providing approved quality of cloth in approved design &

shed and colour with aster, baking as per selection by Kadana sdn item

occupant including all as directed by EIC basic rate of no.89

cloth shell be RS. 400/ PER Rmt for 48'' panna.

SN DESCRIPTION Rate UNIT Code

Labor charges for stitching charges per part in elate

pattern including backside madarpat for 48'' wide part if

required with all tools and tasks to complete the work

Kadana sdn item

82 cloth required shell be utilize from item no 35 and rest 300.00 Part

material required to function shall be brought by contactor

at his own cost. Payment of part shall be considered

irrespective of length of part i.e. for door/window.

Providing and fixing SS pipe of 25 mm dia including all Kadana sdn item

taxes and as per selection as directed by E IC. no.91

Providing and fixing SS knob / side socket to suit the pipe

of 25 mm dia including all taxes and as per selection of

occupant as directed by EIC. The rate is per pair in central Kadana sdn item

support is required than same will be paid RS100 per no no.92

and only end cap is required as per site condition than

same will be paid Rs 150 per pair.

Providing & Fixing 0.60 mm thick corrugated pre painted

galvalume sheet of Tata /Jindal/Monakshi/National make

for roofing including laying in proper alignment fixing with

nut bolt ,gusset ,tapping screw washer, silicon etc., Nadiad CO item

complete as directed by EIC. The rate is inclusive of all no.163

materials, labours, tools tackles, all taxes etc., The

payment shall be made for actual work executed, No

extra payment for over lapping shall be paid.

Providing and fixing 3 mm thick FRP Sheet of approved

86 quality with Machine screw fitting etc completed as per 1100.00 SMT

directed by EIC.

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Structural steel work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for all type sections, in

framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer all

complete as per the structural designs and directions of

Engineer in charge.Column ( 122 x 61 x 3.6mm )

Providing , fabricating & erecting in position M.C. angle

,plate, chequared plate, channels , girders, plain bar for

columns etc including welding the section as per Nadiad CO item

instruction & drawing making holes & 3 coats of oil no.76

paintings with one coat of red oxide of approve shad and

make as directed by the EIC.

Providing and fixing FRP tray for leakage area between

slab and false ceiling to collect the leakage water with

90 necessary aluminium framing in proper slope. 350.00 RMT

Including provision of PVC pipe as outlet pipe as per site

condition and instruction by engineer-in-charge.

Water Supply plumbing & Sanitary fitting

Providing and fixing 15mm L&K make angle cock as Anand toilet

91 800.00 No renovation item

directed by EIC. no.18

SN DESCRIPTION Rate UNIT Code

Providing and fixing 15mm L&Kn make short body Bib Anand toilet

92 896.00 No renovation item

cock as directed by EIC. no.19

Providing and fixing L&K make Pillar cock as directed by Anand toilet

93 969.00 No renovation item

Providing and fixing L&K make Conceal stop cock Anand toilet

94 1500.00 No renovation item

including two nos of brass MFT as directed by EIC. no.21

Providing and fixing L&K make flush cock medium Anand toilet

95 1600.00 No renovation item

including two nos of brass MFT as directed by EIC. no.22

Providing and fixing L&K make two way bib cock as Anand toilet

96 1580.00 No renovation item

directed by EIC no.23

Providing and fixing Pilot brand make brass health faucet Anand toilet

97 600.00 No renovation item

directed by EIC. no.24

EWC: Providing and fixing Wall Hung water closet

(European type W.C. pan) as per approved make of

selection & shade with PP soft close seat cover, P OR S

Trap M.S. or G.I bracket , CP brass hinges and rubber

buffers and Jointing the trap with soil pipe in cement Nadiad CO item

mortar : 1:1 (1 cement : 1 fine sand) including cutting no.129

and making good the walls and floors where required with

all labour and materials. All works to be carried out as per

instructions and direction of Engineer-in-charge. (Model

Jeguar CNS-WHT-959SPP or Cera cordo - S1043108)

Providing and fixing Urinal pan white color of Jaguar make

355x340x535mm (URS WHT 13261) including waste

99 6037.50 NO renovation item

coupling, pipe and labour charges with all tools and

Providing, laying & jointing in true line and level 15mm dia

UPVC Pipe ( SCH - 40 ) including fittings Ashirvad/finolex

make and approved by engineer in charge.Pipe shall be

100 fix on the wall with the help of clamp at every two mt c/c or 71.93 RMT

shall be conceled as directed including necessary fittings

etc.including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of materials.

101 Do as above but for 25 mm dia UPVC Pipe. 90.93 RMT

102 Do as above but for 50 mm dia UPVC Pipe. 193.73 RMT

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diametre x

149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials

SN DESCRIPTION Rate UNIT Code

Providing and fixing Gun metal check or non-return fullway

wheel valve.(B) 20mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(E) 40mm dia.

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with

107 C.P. brass brackets fixed to wooden plugs with C.P. brass 610.32 NO

scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf with

108 C.P. brass bracket and guard rail complete mixed to 535.82 NO

wooden plug with C.P. brass screws.

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including

109 sutting holes and making good the same but excluding 1511.53 NO

fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

WASH BASIN : Providing and fixing table top washbasin

suitable for pillar tap including fixing on granite with

adhesive chemical, waste coupling Half / Full threaded

and waste coupling up to 130mm compatible with table

top basin including, o ring, rubber plug,

nut, nipple, Angle valve 15 mm heavy duty with cap -

flange, including fitting & fixing in socket in position with

required accessories, making the hole in granite, including

110 9361.000 Each Renovation item

plubming, transportation, tools tackles, fitting work and

fitxures for the same etc. complete. Wash Basin : Kerovit

KADIN - KS277 or Kohler / Jaquar / reputed make having

base price more than ₹5,900.00 and Waste coupling code

Kerovit KA870005/06 or Kohler / Jaquar / reputed make

having base price more than ₹775.00, angle valve code

kerovite KA 910001 or Kohler / Jaquar / reputed make

having base price more than ₹775.00

Bottle Trap : Providing and fixing Bottle trap including, o

ring, rubber plug, fitting & fixing in position with required

accessories, including plumbing, transportation, tools HO Toilet

111 tackles, fitting work and fitxures for the same etc 2368.000 Each Renovation item

complete. Bottle Trap : Kerovit KA870002 or Kohler / no.30

Jaquar / reputed make having base price more than

Pillar tap: Providing and fixing Tall Pillar tap including

making the core in granite, Long braided Hose suitable for

tall basin, o ring, rubber plug, fitting & fixing in position

with required accessories, , including plumbing,

112 6215.000 Each Renovation item

transportation, tools tackles, fitting work and

fitxures for the same etc complete. Pillar tap : Kerovit

KB811002 or Kohler / Jaquar / reputed make having base

price more than ₹4,900.00

SN DESCRIPTION Rate UNIT Code

PVC Ball Valve: Providing and fixing Ball valve including

fitting & fixing in position with required accessories, HO Toilet

113 chemcal solution labour work , including plumbing, 450.000 Each Renovation item

transportation, tools tackles, fitting work and fitxures for no.38

the same etc complete.

Towel Hanger: Providing and fixing Towel Hanger

including fitting & fixing in position with required

accessories, , including HO Toilet

114 transportation, tools tackles, fitting work and fitxures for 1089.000 Each Renovation item

the same etc complete. Catagory : Kerovit KA680005 or no.47

Kohler / Jaquar /

reputed make having base price more than ₹800.00

Nahni Trap / Floor Drainer: Providing and fixing floor

drainer (6 x 6 inch) including fitting & fixing in position with

required accessories, chemical solution, , including HO Toilet

115 plumbing, transportation, tools tackles, fitting work and 1517.000 Each Renovation item

fitxures for the same etc no.51

complete. Pillar tap : Kerovit KA640001 or Kohler / Jaquar

/ reputed make having base price more than ₹1,025.00

Providing and fixing 8 mm thick straight glass detachable

urinal partition of heat strengthened glass with both side

acid frost finish glass with all HO Toilet

116 necessary frame, clamps, etc. finished in chrome 6958.00 Each Renovation item

including all tools, tackels, labour, material, etc. of size no.65

900x 450 mm or as per site situatoion

as approved and directed by EIC.

SS plate Signage: 150mm X 100mm - Stainless Steel

satin finished flat etching plate Providing Making and

fixing of various in-door signage, as & where basis. sign in

ISI Brushed S.S. Grade 304 letters in English letter + All

text and design in acid process, etching plates. Etching

text & design with respective color coated complete plate.

The SS mounted on glass or any non holes surfaced by HO Toilet

117 3M double sided tape with required chemical process, 518.00 Each Renovation item

guidelines by 3M company. Whereas, Any other then no.71

glass surface, SS plate mounted by Two side screws with

required grips nd holes on the wall with two SS spacer

screws. The item should be as per instruction at site

approved byf Engineer incharge. The rate shall be

inclusive of scaffolding, drilling, adhesive material etc. at

Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm nom.nal size brass

ball valve with polythene float, C.P brass handle unions

and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend

including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet (overflow

pipe to be measured and paid for separately)(A) Vitreous

China (I) In white colour

Providing and fixing plastic seat and cover for wash down

119 water closer with C.P. brass hinges and rubber buffers. 288.45 NO

(B) Black plastic seal and cover.

SN DESCRIPTION Rate UNIT Code

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M.

size having weight not less than 35Kg.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

121 Foundation (NSF) seal for potable water of following dia. 168.67 Rmt

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

122 Foundation (NSF) seal for potable water of following dia. 206.73 Rmt

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

123 Foundation (NSF) seal for potable water of following dia. 251.31 Rmt

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

124 outside Dia. Low densidy, complete with special falnge 130.65 RMT. 23004D

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(D) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

125 outside Dia. Low densidy, complete with special falnge 335.69 RMT. 23004G

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(G)110 mm

Providing and fixing in position cowel vent to pipes.(C)

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 160 mm diametre x

210 mm length x 196 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing & fixing PVC Nanhi trap of Supreme / Finolex

brand of approved size & make with additional S.S.

128 perforated Jali Cover & PVC Pipe outside the wall with 580.47 NO

plug, bend, etc., complete as directed by E.I.C. 100 mm.

Drainage & Sewarage Item

SN DESCRIPTION Rate UNIT Code

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

130 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 2903.89 NO 24016AA

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

Extra over above items for every additional depth of 239.99 24017A

131 0.1M. of part thereof beyond 450mm depth for Brick NO

masonry chamber.(i) for 455mm x 610mm size.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

132 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 3624.51 NO 24016BA

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for

pipe line with one or two inlets.

Extra over items for every additional depth of 0.1M. of

133 part thereof beyond 450mm depth for Brick masonry NO 24017B

chamber.(ii) for 500mm x 700mm size.

Steel Aluminum & Iron Work

Providing and fixing slandered extruded fo aluminum

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

:2434, @ Wt. 0.643 Kg/mt) with colour anodized aluminum

134 frame for ventilation with 5 mm thick frosted glass as 2200.00 SMT

detailed etc complete for Ventilation.(The rate is inclusive

of providing mosquito net with cleat on one side)

SN DESCRIPTION Rate UNIT Code

Providing and fixing Window having extruded alluminum

colour annodized section frame main outer side 63.50 x

38.10 x 1.95 mm (of Jindal Section No 4605 @ Wt

Kg/Rmt) horizontal Two Track member size 61.85 x

x 1.2 mm (of Jindal Section No 8687 @ Wt 0.695 Kg/Rmt)

vertical member of size 61.85 x 31.75 x 1.3 mm (of Jindal

Section No 8758 @ Wt 0.659 Kg/Rmt) with sliding

shutters of horizontal member size 40 x 18 x x 1.29 mm

(of Jindal Section No 8949 @ Wt 0.456 Kg/Rmt) vertical

member of size 40 x 18 x x1.29mm (of Jindal Section No

8947 @ Wt 0.456 Kg/Rmt / section 8948, @ wt 0.457 Undel sdn item

135 Kg/Rmt ) with 5mm thick tranparent Bronze Colour Tinted 2021.00 SMT

Float glass with powder coated alluminium fittings and

fixtures and tranparent silicon sealant glass fixing to frame

as per detail etc. complete for Window. Only mechanical

joints shall be used, welding shall Not be permitted.

Concealed lock of Indigo or equivalent and white PVC

Gasket is to be utilized in the work. For window opening

more than 2.00 in length equivalent weight with three track

should be provided as approved by EIC.

Providing & Fixing in position partly pannelled and partly

glazed aluminum partition without door shutters using

Colour anodized aluminum section. Panels shall be 9mm

both side pre laminated MDF board of "Greenlam" make

and glazing shall be 5mm thick tinted glass of "MODI"/

Saint Gobain" as per drawing or as directed. Rate

including cost of all materials including gaskets, Aluminum

136 clips having unit weight .097Kg./Rmt. and labour required 2000.00 SMT

to complete the job as per good practice Extruded

Aluminum section of Jindal make available in ALLOY

63400 and Temper WP [HE9WP] corresponding to IS -

733 and IS 1285 to be used for Frame single groove

4605,Frame double groove 4604. Only mechanical joints

shall be used. welding shall not be permitted.

Providing and fixing rolling shutters of approved make 3519.21 Sqm 11005A

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft

137 with bracket plates, guide channels and arragements for

inside and outside locking with push-pull operation

including the cost of hood cover and spring etc.

complete.(A) Shutters having width below 3.5 M.

SN DESCRIPTION Rate UNIT Code

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-ombustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X

595 mm to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel sections

138 (galvanizing @120 grams per sqm including both side) 1657.57 SMT

consisting of main ‘T’ runner suitably spaced at joints to

get required length and size of 24X38mm made from

mm thick (minimum) sheet, 1200mm centre to centre, and

cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm entre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum)

sheet to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on

periphery walls/partitions n a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm

thick (minimum) sheet with the help of rawl plugs at

450mm centre to centre with 25mm long dry

Providing fixing suspended Gypsum false ceiling 12mm

thick (as per design and pattern approved by the engineer-

in-charge. As per includes of providing and fixing GI

parameter channels of six 0.55 mm thick having flange of

30 mm and a web of 27 mm along with parameter of

ceiling screw fixed to brick wall / partition with the help of

nylon sleeves and screws at 600 mm centre then

suspending GI channel of size 45 mm X 0.9 mm thick with

two flanges of 15 mm each from soffit at 1220 mm centre

with ceiling angle of width 25 X 10 mm X 0.5 mm thick

fixed to soffit with GI and steal explanation fasteners.

Ceiling section of 0.55 mm thickness having web of

mm and two flings of 26 mm each lips of 10.5 mm are

then fixed to intermediate channel with the help of

connection clips and indirection perpendicular to the

channel at 457 mm centres 12.5 mm tapered edge zip

board confirming to IS 2095- 1982 is confirming to IS 2095-

1982 is confirming to IS 2095- 1982 is ceiling section with

25 mm dry weight at 230 mm centres.Screw fixing is done

mechanically either with screw driver of drilling machine

and finish so as to have a flush look which includes filling

with crack seal / tape and finishing the tapered / square

edges of the board with jointing compound paper tape with

finish level. Rates are inclusive with cut-out for ceiling

fixtures& Measurement Shall be Consider L X B & Design

Offset Patta shall be Paid Extra.

SN DESCRIPTION Rate UNIT Code

Removing dry or oil bound distemper by a washing and

140 scraping and sand papering the wall surface smooth 11.42 SMT

including necessary repairs to scratches complete.

Extra over item 33 for removing dry oil bound distemper

on ceilings and sloping roofs.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade

on wall surfaces to give an even shade, over and including

a priming coat with distemper primer of aproved brand

and manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter and

also including preparing the surface even and sand

papered smooth.

Distempeing (One coats) with oil bound washable

distemper of approved brand and of required shade on

wall surfaces to give an even shade, after thorouhly

143 brushing the surface clean of all grease dirt, loose pieces 28.29 SMT

of scales and also including distempering with oil bound

washable distemper of preparing the surface even and

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

144 surface to give an even shade including throughly 82.03 SMT

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Extra over above for every subsequent coat of wall

painting with plastic emulsion pain of approved brand

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

146 give an even shade including thoroughly brushing the 40.19 SMT

surface free from mortar dropping and other foreign

matter and sand papered smooth

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

147 shade after thoroughly brushing the surface to remove all 119.07 SMT

dirt, and remains of loose powdered materials.etc

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

149 interior to give an even shade including cleaning the 91.29 SMT

surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Extra over item no.237 & 239 for every subsequent coat

SN DESCRIPTION Rate UNIT Code

Appliying priming coat over new wood and wood based

surface after and including preparing the surface by

152 throughly cleaning oil, grease, dirt and other foreign 42.18 SMT 19009C

matter, sand papering and knotting. (C) Ready mixed

paint brushing priming for enamel

Extra over item 241 for every subsequent coat of priming

coat. (B) Ready mixed paint brushing wood primier pink.

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to

154 give an even shade including cleaning the surface of all 91.29 SMT

dirt, dust and other foreign matter sand papering and

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint,

to give an even shade including cleaning the of all dirt,

dust and other foreign matter.

Extra over item 243 and 244 for every subsequent coat of

Providing and applying water proofing paint treatment with

" ASIAN DAMP PROFF " Paint as per manufacturer's

instruction including filling the cracks seal as per

157 320.00 SMT DGVCL

manufacture 's instruction including cleaning the terrece

by wire brushing & acid washing including all labour &

material required for the work

Miscellaneous Building Item

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using Chlordene and Chiorpurfiles

EC. As Per 6131_paret-II Consentration Weight one

158 percent is recommended i.e one litre 20 EC chemical 123.12 SMT

emulsion with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface

is recommended as per I.S

Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer 3 mm thick water proofing

membrane, black finished reinforced with non-woven

polyester matt consisting of a coat of bitumen primer for

bitumen membrane @ 0.40 litre/sqm by the same

membrane manufacture of density at 25°C, 0.87-0.89 kg/

litre and viscocity 70-160 cps. Over the primer coat the HO Toilet

159 layer of membrane shall be laid using Butane Torch and 442.000 SMT Renovation item

sealing all joints etc, and preparing the surface complete. no.14

The vital physical and chemical parameters of the

membrane shall be as under : Joint strength in

longitudinal and transverse direction at 23°C as 650/

450N/ 5cm. Tear strength in longitudinal and transverse

direction as 300/250N. Softening point of

SN DESCRIPTION Rate UNIT Code

Filling sunk slab with light material like charu/boxite as

directed including cement mortar Plaster 10 mm thick in

CM. 1:3 in all Around Surface (sides of Beams and top of

sunk slab) including adding water proofing material like HO Toilet

160 SUNANDA, FOSROK or PIDILITE to be used as a 0.15 4194.000 Cmt Renovation item

Litre to 1 cement bag and making the surface clean and no.15

attractive as design at any height etc complete as directed

by Engineer in-Charge.with all lead and lift upto height

Carrying out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution on

surface of timber work for termite control including labor

and material etc. complete. Using Chlorpyriphos20 EC as

per 6313 2013 Part III (1% concentration by mass) is

161 Rommended one litre chemical emulsion diluted with 19 74.42 SMT.

liters of kerosene. Total diluted concentration will be

liters inclusive of 1 liter chemical emulsion application in

drilled holes and 0.75 / Litre chemical per one Sqmt two

coat on wood surface not protected by paint or varnish.

Providing & Fixing ready made 2000/5000 LITRE

capacity P. V. C. water tight storage tanks made from

linear low density polyethylene & low density polyethylene

LDPF product confirming to I. S. : 10146 - 1982 with cover

162 including providing & fixing one float valve ball-cock, one 14.63 Liter

of G. I. Waste pipe with plug one of G. I. Over flow pipe no.140

of length up to 0.30 mt. including making all connection

for inlet /outlet supply with necessary fittings for outlet /

inlet etc., complete as directed by EIC. (Syntex water

Providing and laying controlled cement concrete M20 for

trimix RCC Excluding the cost of reinforcement &

including of using 125 micron polythine sheet at base of

concrete using approved quality of polyester fiber (12mm)

during mixing of cement concrete @ 125 gm per bag) and

or as per manufacturing ,s specification of cement

concerte @ 125 gm per bag) and or as per manufacater's

specification including preparing the sub base with form

work of M.S Chhanel of requiared size to maintain level

and slope of concrete with using surface vibrator ,finishing

the surface with power floter and trove ,light brooming on Nadiad CO item

163 the surface with providing construction joints of size 10 6656.40 SMT

mm wide 25mm deep in transverse direction @ 4.5 m C/C

with sealing the same with approved quality bitumen

sealent and providing expansion joints of size 25 mm

width and up to throught depth of concete using 25 mm

thick dura board HD -100 of approved quality and sealing

the same with approved quality bitumen sealent at

meter C/c and or as directed using concrete cutter

machine with necessary equipments ,labours tools tackles

etc complete as directed by EIC.

Providing supplying and spreading / mixing " CHAPDUR"

chemical for smooth and luster finish of top surface of

164 road (Note: Chemical is to be used as per manufacturers 80.00 SMT

specification and instruction given by EIC having

consumption of 4.00 KG per SMT

SN DESCRIPTION Rate UNIT Code

Patching damaged concrete surface including building up

surface profile structurer elements by using polymer

concrete/ mortar/apoxy-latex modified air cured

concrete/morta system confirming to ASTM- C1059-86

type II (01 cement : 03 welligraded cleaned pre packed

river sand with 10% apoxy latex by weight of cement &

water cement ratio as per 0.30 ) or recommended by

manufactured of average of 25 mm thickness in damage BCC LBG comp

areas including applying structural grade apoxy / latex Wall item no.27

bonds coat confirming to ASTM - C 88291 prior to

application of polymar modified mortar/spray to ensure

bond between old concerete & new systems by brush

application levelling, proflilling etc. inclusive of all labour,

material equipment etc. comp as per specifications &

instruction of E.LC..the treated area shall be painted with

exterior emulsions paints of approved quality & make.

Filling cracks with non expanding poleurothene PU Based

elastometric filler material including cut the cracks by BCC LBG comp

Grinder atleast 12 to 15 mm making V Notch ,Removing Wall item no.29

all loose Material by Depression.

Providing and fixing 450 mm effective dia.(after laying) Hot

dip galvenised twin Razor type concencenterina coil with all

required clips ,pins,etc. as per specification. Concentrina

167 coil shall be fixed to M.S. Angles with RBT (Razor barbed 350.00 RMT

tape) with help of u- nails with split pin. Rate quoted on

running meter of compound wall basis ( 1) Effective dia. Nadiad item

of coil after steching ahall be 600mm. no.160

Providing and fixing Chain link roll having 10 gauge wire

& 50x50mm jali with appropriate height as directed and

168 fixing the same to MS angle and providing and fixing MS 270.00 SMT

flat bedding by means of MS nut & bolts etc. complete as Nadiad item

directed by EIC. no.161

Supply & laying of suppotr RBT(Razor barbed tape) with

nails/split pin. Rate shall be quoted on running meters of Nadiad item

RBT laid. no.162

Providing and Fixing Stainless Steel 304 Grade 16 gauge

railing with 38 MM Dia Pipe, & 20 MM Dia support Kitchen

/ Duplex make & flanges as per good engineering

170 practice. The end condition of pipe shall be closed with SS 1500.00 RMT

Cap & properly grinded. This item is for pipe fixed in wall

without any vertical

Providing and Fixing Stainless Steel 304 Grade 16 gauge

railing with 38 MM Dia Top Pipe, 38 MM Dia Vertical

upport at every 1.0 Mtr C/C maximum & Two Nos of

MM Dia horizontal pipe as per design as per good Anand PH item

engineering practice, the end condition of pipe shall be no.11

closed with SS Cap & properly grinded. The measurement

shall be consider & paid for top pipe only.

SN DESCRIPTION Rate UNIT Code

Providing and fixing aluminum compose panel SUN BOND

ALEX OR equivalent for Exterior Facade such as walls

and ceiling and projection by providing Aluminum hollow

section of approved quality and make having section size

38mm x 25mm x 1.2mm thick at maximum spacing of

600mm both direction with necessary fittings same in line

Undel Furniture

172 and level and foxing the frame work with anchor fasteners. 2357.50 SMT

The aluminum composite panel 4,00 mm thick be fixed on

the frame work having thickness of 1.5mm as per detalls

provided in drawing or as directed by EIC. The in between

Grooves between Two panels shall be filled with colour

Epoxy as directed by EIC. Necessary cutout for electrical

switch board etc., may be made as per instruction without

any extra cost.

Providing & fixing letter for office made from 3mm thick

acrylic sheet maximum up to 0.25 meter in height in Undel Furniture

English of approved colour including foding with ACP

sheet with all tools and tackles as directed.

Providing & fixing signage for office made from 3mm thick

acrylic sheet maximum up to 0.30 meter in height in

Undel Furniture

174 Gujarati of approved colour including foding with ACP 253.00 No

sheet with all tools and tackles as directed.

Acrylic name plate having size 1ft x 4 inch for name and Undel Furniture

Providing & foxing MGVCL LOGO made from 3mm thick

acrylic sheet maximum up to 0.65 meter in height of Undel Furniture

approved colour including foxing with ACP sheet with all

tools and tackles as directed.

MS Cupboard shutter: Providing, Fabricating and Fixing in

Walls M.S. C.R.C. Japan Sheet Of 20 Gauge Frame

Inside as Per Requirement On Wall, Floor, Celling all

around and 20 Gauge Shutter for Cupboard As per Site

177 Requirement with chromium plated fixtures & Fastenings, 4208.00 smt

Loaking arrangement including applying Red Oxide

priming coat and painting 2 coats of synthetic enemel

paint of Asian make approved shade etc. complete as

directed By E.I.C.

Any item of SOR year 2023-24 of ROADS & BUILDINGS DIVISION

178 Anand(GOG)/Approved PO/Approved rate analysis as per 1.00 No

description of items with approved rate.

Total Amount with out GST

Total Amount with out GST

Add 1% labour welfare cess

Total with labour cess

Total with L.C and GST