REPAIR/REPLACEMENT OF ALUMINIUM, WOODEN, UPVC AND STEEL JOINERY, CEILING, WALL PANELING AND CONNECTED WORK AT 3 BRD UNDER GE (AF) MC CHANDIGARH

Amount

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Material and labour for powder coated aluminium (minimum thickness of polyester powder coating 50 micron) work for fixed frame portion and shutters of doors, sliding door (any track), openable/sliding windows, ventilators, partitions sliding/openable with extruded built up standard tubular section/appropriate Z section and other section conforming to IS : 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/gauged/paneling, CP brass/stainless steel screws, complete all as specified and directed.

Material and labour for aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed. Make :- Alstone/ Alex panel/ Armstrong/ Euroboard.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Supply and fix 5mm thick float glass, tinted/smoked shape fixed to frame for door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

Supply and fix, plain sheet glass 4mm thick, ordinary quality, not exceeding 0.50Sqm in each pane fixed to aluminium door/window and iron frame including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

Supply and fix plain sheet glass 3mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazing with oil putty and securing pins, spring clips etc, complete all as specified and directed.

S&F 100mm long butt hinges medium weight stainless steel with ISI mark, complete all as specified and directed.

Supply and fix 140mm size Floor door stopper of stainless steel body, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Supply and fix in repair 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fix in repair Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fix 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.

Supply and fix in repair 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.

Supply and fix for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. Make - Ritz, Crown

Supply and fix in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. Make - Ritz, Crown

S&F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-Charge.

Supply and fix, Stainless steel sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, 12mm dia, complete all as specified and directed.

Supply and fix in repair Aluminium alloy, anodised, sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and Fixing, stainless steel, barrel tower bolts 200mm long and fixed, complete all as specified and directed.

Supply and Fix in repair, powder coated door seal fixed with screws to any type of shutter, complete all as specified and directed.

Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

Supply and fix in repair brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightening with new screws of by aluminium angle cleat, complete all as specified and directed.

Material and labour for repairing any type of aluminium/wooden window shutter and refixing in the same opening after resecuring its frame work by means of tightening with new screws of by aluminium angle cleat, complete all as specified and directed.

M&L for fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns BIS product Confirming to IS 2095 Part 3:2022, having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4)-1970 and light reflectance of 90% (minimum) to be laid and including in true horizontal level suspended on inter-locking metal Powder Coated T-Grid of hot dipped galvanized iron section of 0.33mm thick on Silhouette Profile, rotary stitched single webbed white with 6mm reveal profile (Black), comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners/(Screw holding in same size for trusses, rafter and purlins etc), 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 20x20x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. including taking down existing ceiling. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Make: Diamond brand TM/Dexune/Everest/Arm strong ceiling Note : MTC to be provided by manufacturer.

S&F factory made box type steel window composite type with double rebate pressed steel frames 80mmx60mm (peripheral) and 80x75mm (intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/ ventilator double shutters of MS tubular section of size 50mmx20mmx1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for wire and putty for glazing shutter, handle of 100mm size made out of Z section 01No., MS stove enamelled black tower bolt of size 120mm 02 Nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long holdfast 04 Nos each window inluding necessary filling frame with PCC 1:3:6 type C-0, complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, flat iron without connecting plates, framed angle iron, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated including all necessary screw and bolts at any size and necessary welding , holes and cutting required conforming to Fe 290 Gde-E-165.complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed.

M&L for providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frames (backfil) complete all as specified and directed.

M & L for providing cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fasts, complete all as specifed and as directed.

S&F for 35mm thick 2nd class hard wood factory made plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both side faces. The size of rail and site as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specifed and directed.

S&F for 30mm thick flush shutters, solid core construction, with block core plywood face panels, commercial type on both sides, chemically treated against termite infestation complete all as specified and directed.

S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for door and ventilator as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed.

S&F stainless steel handle 150mm in size fixed with screws complete all as specified and directed.

S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed to aluminium/wooden Vent/window/door (cost of aluminium beads and neoprene included in relevant item of aluminium window) complete all as specified and directed by EIC.

S&F Aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed to aluminium/wooden Vent/window/door all as specified and directed Engr-in-charge (cost of aluminium beads and neoprene included in relevant item of aluminium window) in repairs.

S&F in repair PVC cabinet mirror 450X300 mm with 3 mm thick mirror, complete all as specified and as directed.

S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles and completed all as specified and directed.

S&F in repair 20mm dia aluminium decorative type powder coated curtain rod or similar articles and completed all as specified and directed by Engr- in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.

Supply and fixing of UPVC door/windows two/ three track, sliding/openable type in any position with 6mm thick toughened glass of approved make (glass tint as approved by GE) with chowkhat if required incl all necessary fittings and fixtures and as directed by Engr-in-Charge. Make: Finesta, Lingel, Adopen

S&F Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white, fixed in frame, including dismantling complete all as specified and as directed.

M&L for 5mm thick hollow single side prelam (Texture to be approved by GE) PVC sheet and fixing at site on wall with solvents and headless nails including side lipping, fillets etc, complete all as specified and directed.

S&F 12mm thick customized and Modular Toughened glass as in openable door ifixed with patch fittings. Fixing of glass should be top to bottom including required corner patch/Bottom patch fittings and any suitable fittings including glass edges cutting with diamond blade and M/C polish, including stainless steel grade 304 or 316, rate including for drilling hole for patch fitting and spider fitting as required and locking arragement with 900mm SS handle etc complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors etc.

M&L Polished granite stone slab18- 20mm thick coloured as in cooking platform/door sills, partitions, jambs, pillars, window-cills, set in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling complete all as specified and as directed by Engr-in-Charge complete.

M&L Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes etc complete all as specified and as directed etc.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15mm thick on brick, concrete or dubbed surfaces in cement mortar 1:6 finishing even and smooth without using extra cement and similar likes at any height including necessary scaffolding, complete all as specified and as directed.

M & L for rendering 15mm thick on brick, concrete or dubbed surfaces in cement mortar 1:6 finishing even and smooth without using extra cement and similar likes at any height including necessary scaffolding including taking down cement of cement / lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Two coats of Oil Bound Distemper over a coat of alkali resistant primer over new plastered surfaces including preparation of surfaces complete all as specified and as directed.

Note:- Amount of credit of Rs. 29515.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

MS SACHDEVA BUILDERS (BID ID -3384063)

M/s Bhagwati Enterprises (BID ID -3385067)

SHRI GANESH CONSTRUCTION CO. (BID ID -3391761)

Anil Kumar Gupta (BID ID -3384864)