Providing and laying Cement Concrete guard stone replacing existing damaged guard stones including fixing Median marker, Bollards with painting etc. complete on various T.P. roads in Adajan Gam depot area in West Zone (Rander).

NAME OF WORK :- Providing and laying Cement Concrete guard stone replacing existing damaged guard stones including fixing Median marker, Bollards with

painting etc. complete on various T.P. roads in Adajan Gam depot area in West Zone (Rander).

No. PARTICULARS No Length Width Depth QTY. RATE PER AMOUNT

1 Dismantling of structures of roadways, including disposing off

unserviceable material free of cost which will be the owenrship

of contractor or as directed by the Engineer with all leads and

lift etc. Including labour, machinery & equipments required to

complete this item etc.

(A) R.C.C. Pardi 10.00 1057.85 C.M.

(B) Removing existing Kotah Stone 1.00 47.72 S.M.

(C) Brick / Stone Masonary 5.00 550.40 C.M.

(D) Plain Concrete 50.00 609.26 C.M.

(E) Bituminious Pavement 25.00 255.65 C.M.

(F) Non Bituminious Pavement 10.00 155.25 C.M.

2 Providing and laying cement concrete cast-in-situ Guard Stone

(1:1.5:3) (1 cement : 1/2 coarse sand : 3 graded stone

of 20 mm nominal size) including cost of form work including,

curing labour,machinery, equipments required to execute this

etc. complete. Size :- (600 x 225 x 400)

3 Providing and laying cement concrete cast-in-situ Guard Stone

(1:2:4) (1 cement : 2 coarse sand : 4 graded stone aggregate of

20 mm nominal size) including cost of form work including,

curing labour,machinery, equipments required to execute this

complete. Size :- (750 X 350 X 400)

4 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size) & curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for 0 0.00 0.00 0.00 0.00 4146.15 CM

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

5 Supply and Fixing of Flexible Median Marker (FMM) from a

combination of tough, high impact resistant engineering

thermoplastic material with U shape structure having

rebound/bounce*back property having overall height, width and

body thickness not less than 181mm, 120mm, and 6.5mm

respectively. The flourscent yellow retro reflective sheeting

meeting ASTM D4956 Typ-XI specifications, in the FMM helps 1500 0.00 0.00 0.00 1500 271.69 No.

to highlight the medians and increase the visibility during the

night. The flexible Median Marker should have integrated shank

having depth of min 30mm and a dia min 20mm fixed by drilling

a hole on the kerb for the shanks to go inside, without nails and

using epoxy resin based adhesive as per manufacturer's

recommendation and complete as directed by engineer in

charge.(3M or Equivalent Brand)

6 Providing Supplying & Fixing jumbo swiss type traffic bollard

made out of 1.5 mm thick CRC sheet in conical shape having

188cms, bottom dia 30cms, top dia 22cms, with top circular

direction plate of 30cms dia for arrow fabricated as per attached

drawing and coated with black epoxy powder coating and Retro 50 0.00 0.00 0.00 50 3729.97 NOS

reflectorised three yellow strip 15cms wide and arrow Micro

Prismatic grade sheeting as per ASTM 4956-09 Type-XI Fixing

with cement concrete M-25 grade, Foundation size

30cm*30cm*35cm as per the instruction of Engineer in charge.

7 Providing and fixing of powder coating black matt finished MS

pipe bollards made from 100mm O..D. & 7.5mm thick MS pipe,

having length of 1050mm, 3mm deep 25mm wide groove

covered by 25mm wide white retro reflective strips, hollow

section shall be filled with cement concrete foundation inclusive 150 0.00 0.00 0.00 150 1610.00 NOS

of excavation, fixing, refilling of excavated material, grouting with

cement concrete and anchor bar/ anchor fastner (hilti),

removal of debris etc as directed by Engineer in charge and

RCC foundation of 3.00 mt. x 0.60 mt.size.

\\10.84.1.120\d\1.ROAD MAIN PC-12 BACKUP 14.06.22\SIR\Biyawala\TENDER SET\2026\GAURD STONE\GAURD STONE 2025-26 P.B

No. PARTICULARS No Length Width Depth QTY. RATE PER AMOUNT

8 Signage Pole (Safety Bollard) for junctions (M. S. Cylindrical

Pipe of approved brands) of Size, 8 inch Dia, height - 8 feet.

Wall thickness of pipe 3mm with base plate of 12 mm M. S.

base plate, round shape, cut 4 holes on surface. M. S. Cleats

welded with base plate & pole surface at 90 deg. includes 4 nos.

Bolts to fasten the pole & ground, with Chemical filling. Work

includes Rectro Reflective Vinyl, Red / Blue & White High 15 0.00 0.00 0.00 15 10170.00 NOS

density, High grade 3M - Diamond grade Displaying : BRTS

Letters with Arrow & Bus logo on the middle Blue background

with Red & White Band type display on top & bottom as per the

approved design. Shall be installed over flexible with 3.00 mt. x

0.60 mt. RCC foundation or as instructed by Engineer in Charge

9 Painting two coats of enamel paint ( Excluding priming coat)

over previously painted wall with even shade & surface after 3000 0.00 0.00 0.00 3000 60.00 SM

removing dirt, dust foreign matter etc. comp. (M.R.)

Executive Engineer

West Zone (Rander)

Contractor's Sign

\\10.84.1.120\d\1.ROAD MAIN PC-12 BACKUP 14.06.22\SIR\Biyawala\TENDER SET\2026\GAURD STONE\GAURD STONE 2025-26 P.B