Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC 22 1685 ST JACOB CHURCH LANE PAMBAIMOOLA EDACOCHIN ERNAKULAM KERALA 682010 | COCHIN | ERNAKULAM | KERALA | 682010 | L1 | Accepted-AOC AOC | |
| 2 | L2₹7.7 L+₹400 (0.05%)Rejected-Finance | L2 | Rejected-Finance BEING L2 |
Tender Value
₹8.5 L
EMD Value
₹17,000
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I R AND D KOCHI
AGE I R AND D KOCHI, THRIKKAKARA,KAKKANAD, KOCHI 682021
REPAIR MAINTENANCE OF ROLLING SHUTTER, APPROACH PATH, DOORS AND CERTAIN BR REPAIR WORKS TO ELECTRIC SUPPLY INSTALLATIONS UNDER AGE I RD KOCHI
2022_MES_555518_1
8157E8AGERDK
Open Tender
Civil Works
Item Rate
180 days
KAKKANAD
As per tender doucments
6 documents required · 6 mandatory
₹500
Yes
AGE I R AND D KOCHI
₹17,000
Yes
15 May 2025
1 Oct 2022
31 Oct 2022
1 Oct 2022
29 Oct 2022
15 Oct 2022
Amount
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.
M&L for over hauling of rolling shutter of area exc 5 Sqm but n exc 20 sqm each and overhauling, greasing, oiling, repairing worn out rivets and replace with new rivets, easing the locking system etc including minor welding work as required and refixing in the same position in the smooth functioning of shutters complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of oil bound distemper emulsion paint, white or tinted on old surfaces of wall, over a coat of alkali resistant priming paint, including complete removal of existing treatment by using high pressure water, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots at any height including scaffolding and necessary arrangement etc and complete all as specified and directed by Engr-in-Charge.
M&L for preparing of old decorated surfaces of ceiling (plastered or un plastered) including cornices etc and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of weather proof exterior emulsion paint on old plastered surface of wall, over a coat of primer including complete removal of existing treatment by using high pressure water, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots at any height including scaffolding and necessary arrangement etc and complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) all as specified & directed by Engineer-in-charge.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-charge.
M&L for cement concrete 1:2:4 Type B1 (using 20 mm graded aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, hold fast including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.
M&L cement concrete 1:4:8 Type D-2 (40mm graded aggregate) as in floors and pavings of 100 thick all as specified and as directed by Engr-in-Charge.
M&L for Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick set joined and pointed in neat cement slurry in floors with white cement and pigment over Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 and complete all as specified and directed by Engr-in-Charge.
M&L for Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new Sheet glass of 3mm thick, ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed by Engr-in-Charge.
M&L pre-cast concrete block masonry 1:3:6 Type C1 (20mm graded aggregate) with solid block exceeding 10 cm in width and setting CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15mm thick in CM 1:4 on surfaces other than fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
M & L for applying two coats of weather proof exterior emulsion paint on newly plastered surface of wall, over a coat of primer including preparation of plastered surface of wall etc and complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 10mm thick in CM 1:4 on surfaces other than fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of oil bound distemper emulsion paint, white or tinted on newly plastered surfaces of wall as decided, over a coat of alkali resistant priming paint, including preparation of plastered surface of wall etc and complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), exceeding 1.5 sq.m but not exceeding 4 sq.m each, complete all as specified and directed by Engr-in-Charge.
M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
Taking down of shutters of any description but exc 1 sq. M and n exc 2 sq.m each complete all as specified and directed by Engr-in-Charge.
S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and directed
S & F Aluminium anodised, barrel tower bolts, 150mm long, of extruded section and fixed, complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated type anodised 150 mm long and fixed, complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge.
S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length 150mm including taking down existing unserviceable stopper, complete all as specified and directed by Engr-in-Charge.
Taking down existing unserviceable direction board of any size and any type, provision of direction boards of size 1500mm x 900mm made of high intensity prismatic grade reflective sheeting (HIP type IV reflective sheeting) pasted on 3mm thick aluminium composite sheet back with frame made up of MS angle iron of size 25mm x 25mm x 3mm and fixing post (2Nos) of MS angle iron of size 50mm x 50mm x 5mm duly painted with two coat of synthetic enamel paint over a coat of ed oxide primer and shall be grouted in ground with proper size of concrete block in PCC (1:3:6) type C2 (using 40mm graded stone aggregate), complete all as specified and directed. MAKE:- 3M / AVERY or techno-commercially equivalent make as approved by AGE(I).
PARAMBIL ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .