CERATIN REPAIR TO OTM ACCN/ MD ACCN UNDER AGE B/R-II AT GE CLEMENT TOWN, DEHRADUN

Amount

M&L for non skid, joint free, coloured ceramic tiles, area of tiles exc 0.11 sqm but not exc 0.18 sqm of size 400x400 x 7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), including dismantling of tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid, joint free, coloured ceramic tiles , area of tiles exc 0.18 sqm but not exc 0.38 sqm (600x600 x7 to 8 mm thick) (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), including dismantling of tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid, joint free, coloured ceramic tiles , area of tiles exc 0.18 sqm but not exc 0.38 sqm ( 600x600 x7-8mm thick ) (Square/Rectunglar), set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles as in riser of steps, skirting, dado and pillar etc with and includind over 10mm thick rendering in CM (1:3) including dismantling of tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured, glazed ceramic tiles size 450x300x 7-8mm thick as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in CM (1:4) including dismantling of tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M&L for brick work except bricks sub class B old size bricks straight or curved plan exc 6m mean radius built in cm 1:6 complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed(cleaning of reinforcement bars by removing of loose concrete)

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper including a coat of primer of approved tint over a coat of wall care putty complete all as specified and directed

M&L for applying one coat oil bound distempering on internal wall surface of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface of external wall and applying two coat of cement base paint complete all as specified and as directed.

M&Lfor rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement) Complete all as specified and directed

M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces. complete all as specified and directed by Engr In Charge.

M&L for prepration of old plastered surface and applying one coat of cement based paint complete all as specified

S&F in repair double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connection Cast iron P or S trap ,connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified.

S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified.

S&F stainless steel kitchen plate rack of over all size 780 x 600 x 250mm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified.

S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified.

S&F in repair 15mm Stop valve angle cock fancy type, chromium plated , screwed both ends for iron pipe or for union complete all as specified.

S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified.

S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed

S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified

Refixing 15 mm old steel tubing and connection in new or old poisition wall ceiling floor etc complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed

S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified

Refixing 20 mm old steel tubing and connection in new or old poisition wall ceiling floor etc complete all as specified and directed

S&F 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints laid in trenches/fixing to wall with cleats complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed Make : Kisan/Prince/Supreme

S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path land hard standing etc laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed

S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed

S&F in repair 18 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed

S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws all as specified and as directed

S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position all as specified

S&F in repair 6 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with stainless steel screws ans solvent cement/ adhesive to make Cupboard/Kitchen back and sides complete as per manufacturer’s instructions complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm and making good disturbed portion to match existing surfacescomplete all as specified and directed

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) and making good disturbed portion to match existing surfacescomplete all as specified and directed

M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

S&f factory made single extruded WPC (wood polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K valve 58-60 (Suspension Grade ) , calcium carbonate and natural fibers (wood powder/rice husk, wheat husk ) and non toxic additives (maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified.

S&F 35 mm thick factory made wire mesh solid WPC Prelaminated both side door shutter consisting of Density 650 kg/cum manufactured by an ISO 9001-2015 certified company . Door to be panelled with SS mosquito Mesh and XTN aluminium mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos MS powder coated butt hinges size 100x 25x2mm and 32 mm long steel screw drilled suitable to pass through both the walls of the MS tube. Other hardware should be fixed with 19x 6 mm size steel screws etc, manufacturer's specification complete all as specified and directed.

S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x 25mm. Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flat beading for provision of guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, equivalent stay, handles 2 nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.36mm dia of wire and 1.40mm aperture. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm around except runner portion complete all as specified and directed

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed

S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate

S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled complete all as specified.

S&F 200mm long stainless steel barrel tower bolts all as specified

S&F 150mm size stainless steel handles all as specified

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repair framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified. as specified.

M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed

S&F in repair welded steel wire fabric weight n. exc 4 Kg per Sqm suitable to weld with steel members complete all as specified and directed by Engr-in-Charge

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Saurav Enterprises (BID ID -3298443)

SWASTIKA BUILDERS (BID ID -3303177)

JBN CONSTRUCTION (BID ID -3298051)

G S CONSTRUCTIONS (BID ID -3302652)

ADEPT INFRA SOLUTIONS (BID ID -3303042)

RADHA ENTERPRISES (BID ID -3297109)

Gupta Enterprises (BID ID -3302516)

High Tech Metal India (BID ID -3299537)