Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.9 LAccepted-AOC | 1 | Accepted-AOC admitted | |
| 2 | 2₹26.5 L+₹1.6 L (6.46%)Rejected-AOC | 2 | Rejected-AOC admitted | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 4 | Not Admitted-Fee/PreQual/Technical GRAM BAHRODHA BLOCK MACHHRA DISTRICT MEERUT | MEERUT | UTTAR PRADESH | 245206 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹55,000
Closing Date
19 Sept 2022, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Office Sharda Sagar Division Pilibhit
Repair of Duni I.H. in District-Pilibhit for year 2022-23(Lot no-1)
2022_UPIDC_728063_1
04/EE/2022-23
Open Tender
Civil Works
Item Rate
90 days
PILIBHIT
Please refer Tender documents.
2 documents required · 2 mandatory
₹854
₹55,000
30 Dec 2022
14 Sept 2022
19 Sept 2022
14 Sept 2022
19 Sept 2022
14 Sept 2022
90 days
Amount
Earth work in foundation in dry ordinary soil including lift up to 1.50 m and lead up to 30 m and including back filling, watering and ramming fo excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-in-charge.
Laying C.C. 1:3:6 Mix (M-10) cement, coarse sand & 20 mm down graded stone shighle including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.
Laying Brick work C.M. 1:6 Mix cement & coarse sand including cost of all material, labour and T&P etc. complete.
Centering and shuttering or steel shuttering for R.C.C. work including cost of all material, labour and T&P etc. complete.
Laying R.C.C. 1:1.5:3 Mix (M-20) cement, coarse sand & 20 mm down graded stone shighle including cost of all material, labour and T&P etc. complete but excludiing cost of Centering, shuttering & Reinforcement.
Laying C.C. 1:2:4 Mix (M-15) cement, coarse sand & 20 mm down graded stone shighle including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.
12 mm thick plaster with cement mortar in proportion of 1:6 Cement and sand1.0 fineness modulus With standard water proofing compound over brick work, minimum thickness not to be less than 1 cm including supply of all material, labour and T&P etc. required for proper completion of work.
Dismentalling of doors & windows, including chowkhats, with hold fast & including stacking of dismantled materials, as directed by Engeneer-in Charge within a distence of 60meter (200 feet).
Supplying and fixing angle iron chaukhat with ISNT-40x40x6 with fabrication and all complete material.
Supplying & fixing angle iron window with ISA: 35x35x4 , ISNT:35x35x4 and 10mm square bar grill, glass, wire mesh with fabrication and all complete material .
Supplying and fixing angle iron frame jali ISA:35x35x4 with square wire mesh jali (1 inch x 1 inch) cover open area fabrication and all complete material.
Mild steel or Iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc. (when not included in an over all rates) wrought to reqired form, including of supply of steel, bolts, nuts and wastage etc. and its fixing required for proper completion of work
Supplying & fixing of flush doors commercial quality confirming to IS:2202 Part I (1983)including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts lock handles spring fittings with screws etc.
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. flat !5x3 mm and nuts and bolts complete with stainless steel (grade 304) wire gauze of 0.5mm dia. Wire and 1.4 mm aperture on both sides
Providing & fixing glass panes with putty and glazed clipsin steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes
Dismentaling C.C. or brick or granolithic floor or floor to be stone flagged or tiled floor including base concrete stacking of dismentled material with in 60M distence.
Supplying & fixing 6mm (1/4'') China white glazed in flooring or skirtting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all material, labour and T&P etc. required for proper completion of the work
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting applying: (a) after surface preparation, first layer of slurry of cement @0.488kg/m2 mixed with water proofing cement compound @0.253 kg/m2 (b) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289kg/m2 mixed with water proofing cement compound @0.670 kg/m2 and coarse sand @1.289 kg/m2 This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.
Regrinding and polishing of floors including supply of extra cement, chhapra batti, carborandum stone, all other materials, labour and T&P etc. required for proper completion of the work. Marble dust shall be added in the floating coat in ratio 5:1(Marble dust:cement) if necessary but no extra amount will be paid for it. This incluides final finish with french mansion polish or other approved polish.
Mild steel sections such as rods, angles, tie, flats and etc. on one coat of primer and two coat of enamal paint with cleanig the surface of all dirt, dust and other foreign metter, sand papering, and stopping including cost of material, labour and T&P. paint shall be use per standard IS specifications.
Distempering with oil bound washable distemper of approved brand and required shade area old interior wall with two or more coats over and including water thinable priming coat with cement primer complete/sqm.
Finishing walls with Acrylic smooth exterior paint of required shade twon or more coat applied @1.67ltr/10 sqm over and including priming coat of exterior primer appied @2.20kg/10 sqm (2)
Providing and injecting chemical emulsion for preconstrucional anti termite treatment and creating a chemical barrier under and around the columns pits, wall trench basement excavation top surface of plinth filling junction of wall and floor along the external per meter of building expansion joints surrounding of pipes and conduit etc. Complete (Plinth area of the building at ground floor only shall be measured as per I.S.: 6313(part ii 1981). aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordence will be used. the rate of application of chemical emulsion shall be as follow: (i) Treatment for masonry and foundation 5 litres/sqm. (ii) Back fill in immediate contact with foundation 7.5 litres/sqm. (iii) Treatment of top surface of plinth filling 5 litres/sqm (iv) Treatment junction of soil along external per meter building 7.50 litres/sqm. (v) Treatment of soil under apron along external perimeter 5 litre/sqm.
Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes of 100 mm dia having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, releifing & testing of joints complete as per direction of Engineer-in Charge.
Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (30MPa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/ laying of Interlocking tiles levelling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc. required for proper completion of work as directed by Engineer-in-Charge.
Steel wire mesh for covering verandah in factory made used wire made square hole 1 inch x1 inch collect local market piece (1.24x1.24m) so total weight = 4.950 Kg.
Cement concrete flooring upto 40mm thick with laying 75 mm thick base concrete for flooring including all material, labour and T&P.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required .
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].
Providing and fixing vitreour China wash basin with C.I. brackets painted white 15mm C.P. brass pillar taps C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting and making good the walls wherever required.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
Providing and fixing unplasticised PVC connection pipe with brass unions
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:
Providing & fixing soil, waste and vent 100mm dia centrifugally Pvc pipe with bends and all fittings.
Providing & fixing soil, waste and vent 75mm dia centrifugally cast iron S & S pipe..
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of 100mm diameters.
Providing and laying 100 mm dia cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. (Bend 87.5 degree)
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. (Shoe (Plain)
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
Providing and fixing 15mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..
Providing and fixing 20mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) 100mm dia S.W. pipes including bed concrete as per standard design
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
Same as item No. (1) but for call bell
Same as item No. (1) but for fan and light duty exhaust fan.
Same as item No. (1) but for 5 amp plug point with piano type switch and socket etc.
Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work.
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect. CAT-AAA
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. a) 600x480x200 mm. size
Supply and fixing of flush/surface mounting distribution boards complete in all respects. A) 4 Way TPN CAT-B
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. A) 5 - 32 amps. CAT-B
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. A) 25 Amp. 4 Pole MCB CAT-B
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. CAT-B
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
Supply and erection of AC 1200/1400 mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required. 200mm sweep.
Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.
a) From 0.00 mt to 1.50 mt
b) 1.50mt to 3.0 mt
c) 3.0 mt to 4.50 mt
Providing and laying in cement concrete 1:3:6 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete)
brick work in 1:6 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
12.5 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 Coarse sand
Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar)
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
M/S R S Enterises
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .