CIVIL WORKS IN SUB-STRUCTURE IN CONNECTION WITH DEVELOPMENT OF KESHOD AIRPORT, KESHOD (GUJARAT)

CIVIL WORKS, ELECTRICAL WORKS, PLUMBING WORK & FURNITURE WORKS

CIVIL WORKS IN SUB-STRUCTURE IN CONNECTION WITH DEVELOPMENT OF KESHOD AIRPORT, KESHOD (GUJARAT)

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."

Please Enable Macros to View BoQ information

Percentage BoQ At Par

BoQ_Ver4.0

Notice Inviting e-Tender (eNIT) No : B AND R/HO/51287/CW Substructure/NIT/SC/01 Date 15.10.2025

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

EARTH WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All Kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

All kinds of soil

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:

With Chlorpyriphos/ Lindane E. C. 20% with 1% concentration

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floor

With Chlorpyriphos/Lindane E. C. 20% with 1% concentration

CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

R.C.C WORK

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Upto plinth level

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

Concrete of M25 grade with minimum cement content of 330 kg /cum

Add for using extra cement in the items of design mix over and above the specified cement content therein.

BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :

Cement mortar 1:6 (1 Cement : 6 coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.

Cement mortar 1 :4 (1 cement: 4 coarse sand)

Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry

CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab over 0.50 Sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600 x 600 mm

WOOD WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 Kg to 80 Kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing bright finished brass 100 mm mortice latch and lock, lSI marked, with six levers and a pairofanodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Providing and fixing partition upto ceiling height consisting of G.l. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.l. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at comers (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

STEEL WORK

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fiXing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame • concrete/ masonry, etc. as per direction of Engineer-in-charge

FLOORING WORK

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joints with white cement and matching pigments etc., The tile must be cut with zero chipping diamond cutter only, laying of tile will be done with the notch trowel, plier, wedge, clips of required thickness, Levelling system and rubber mallet for placing the tiles gently and easily.

Double Charge Vitrified Tile of Polished finish of size

Size of Tile 600 x 600 mm

Glazed Vitrified Tile Matt/ Antiskid finish of size

Size of Tile 600 x 600 mm

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick

ROOFING WORK

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising@ 120 grams per sqm including both side) consisting of main 'T runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.l. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.l. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.

Supply and fixing of 1) Top layer Supply of onsite roll formed profile sheet architectural standing seam system with nominal 400 mm/403 mm of effective cover width with two major corrugations of nominal 65 mm depth. The flat of the panel shall contain three longitudinal flutes parallel to major corrugations at pitch of nominal 100 mm/ 101 mm center to center distance for strength. The feed material is manufactured out of nominal 0.50 mm Base Metal Thickness (BMT), 0.55mm (TCT) with min. 300MPa yield strength steel, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Bare AZ150 (Min. 150 gms/sq.mt total on both sides) with paint coat as per AS/NZS 2728 type 3- 4. The paint shall have a total coating thickness of nominal 30 μm to 35 μm. Nominal 15 um to 20 μm exterior coat on top surface and nominal 5 um to 7 pm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved color shade by concern authority. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material

Specially designed roof clips shall be used to hold roof panels to the supporting structural members. The clips are extruded from structural grade Aluminum. The head of the clip accurately matches the roof panel corrugations to ensure the sheets slide freely during thermal expansion and contraction. Clips shall have Thermal pad at the bottom of the clip to reduce thermal bridging effects. Panel side laps shall be field-seamed by 2) Second Layer - Insulation - Rockwool insulation of 50 mm thickness, 48 kg/m3 density. 3)Third Layer - Vapour Control Layer -1 layer of vapor control barrier- 150 -180 microns thickness double sided aluminium foil with reinforcement. laps to be secured with double 4) Fourth Layer-GI Z girt - Galvanised steel Z girt of min. thickness 1.5 mm to be provided over liner, with galvanization 120 gsm to be fixed with Carbon Steel screws. 5) Fifth Layer - Bottom sheet - Galvalume Color Coated Trapezodial Screw Down profile sheet in thickness of 0.50 mm (TCT) profile sheet of 980-1050 mm effective cover width and 28 mm height ribs with pitch at 203 mm centre-to-centre. The feed material is manufactured out of nominal 0.50mm Total Coated Thickness (TCT), 0.45 mm (BMT), Hi-strength steel with min. 550 MPa yield strength. metallic hot dip coated with Aluminium-Zinc alloy 55% Aluminium, 45% Zinc) as per AS 1397. Fixed to the purlins with solf drilling carbon stopal scrows at 500mm spacing

FINISHING WORK

6 mm cement plaster to ceiling of mix :

1:3 (1 Cement : 3 fine sand)

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20Kg/ 10 Sqm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete

Upto 5 mm depth and 5 mm width

Waterproofing of Raft/Base Slab :

Supplying and installing >1.2 mm thick self-adhesive HDPE membrane, having puncture resistance of 1000N as per ASTM E 154,Tensile strength of 25 Mpa as per ASTM D412,Elongation of 400% as per ASTM D 412, Resistance to hydrostatic head > 60M as per ASTM D 5385,Peel adhesion to concrete 1500N/m as per ASTMD903, Lap Adhesion > 2500 N/m ; 28 Days UV Exposure test-Pass and conforming to IS 16471:2017 requirements of UG waterproofing structures, as per manufacturer's recommendation. as directed by engineer in charge

Waterproofing of Un-Confined Retaining Wall:

Providing and laying of 1.5 mm thick SBS based self-adhesive waterproofing membrane topped with hdpe cross laminated film with the following technical properties-Softening point of 105 (oC) as per ASTM D36 ,Tensile Strength (L/T)- 3.5 N/sq.mm as per ASTM D412,Elongation (L/T) L- 180 % ,T -180 % as per ASTM D 412, Tear Resistance 125 N as per ASTM D 4073, Puncture Resistance- 200 N as per ASTM E 154, Hydrostatic pressure > 60 m (6BAR) No leakage as per DIN 1048, including cleaning the surface, priming the surface with cold applied bituminous primer@4-6 sqmtr/litre, properly sealing the joints & maintaining 75 mm overlap between the membrane selvedge & 100 mm overlap on the end joints of the membrane over the slab etc. complete. Please refer TS Civil Pg. No. 841 for Detailed Specifications. 1) SBS membrane : Providing and laying 1.5mm thick "Dr. Fixit Samshield XL1500", self adhesive SBS membrane with 0.5mm HDPE film on unconfined Retaining Wall meeting / exceeding BOQ Specifications. 2) Termination of membrane : upplying and applying aluminium strip flashing with fasteners at the top and sealing the joints with PU sealant. 3) Membrane Protection : Supply and installation of dimple board having dimple height of 8mm spot bonded onto the self adhesive membrane as per the specifications .

SECTION - 1 (ELECTRICAL PART)

Wiring for light point/ fan point/ Exhaust fan point/ call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable on surface/recess medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recessed i/c cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

TV antenna socket outlet

Telephone Socket outlet

RG 45 Lan socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required

1 or 2 Module (75mmX75mm)

4 Module (125mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing call bell/buzzer suitable for single phase, 230 Volts, complete as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying, Installation, Testing and commissioning of 2ft LED Batten (surface/ceiling mounting )with a nominal system lumen output of 1000 lumens and minimum system efficacy of 100 Im/w. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire SDCM should be equal to or less than 3.The luminaire should have a color temperature of 5700K(+/-500K) and CRI > 80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of white powder coated aluminum sheet etc as required.

SITC of 18 W LED Recessed Down lighter with a nominal system lumen output of 2200 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6000K(+/-500K) and CRI>80. The luminaire SDCM should be equal to or less than 3. The luminaire shall meet IP20 rating with THD<10% and PF > 0.9. The luminaire housing should made of PDC aluminium with a polycarbonate reflector and a high quality diffuser and having surge protection upto 2.5kV.

SITC of LED 2ft.x2ft Recessed fitting with a nominal system lumen output of 3500 lumens and a minimum system efficacy of 120 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 5700K(+/-500K) CRI>80 and UGR<19. The luminaire SDCM should be equal to or less than 3. The luminaire shall meet IP40 rating with THD<10% and PF > 0.9. The luminaire housing should made of PDC/Extruded aluminium with a polycarbonate reflector and a high quality diffuser and having surge protection upto 2.5kV.

Providing and fixing 10 Watt LED Bulk head fitting with min lumen output 1100 having all accessories IP 66 protection and suitable for 220 V , 50 Hz AC supply complete etc as required. The luminaire SDCM should be equal to or less than 3.

Supply, Installation, Testing and Commissioning of300 MM Sweep Exhaust fan/Ventilating fans Capacitor start, copper wounded, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.

Supplying and fixing following way, Horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

Supplying and fixing of following ways surface/recess mounting ,vertical type,415 Volts ,TPN MCB distribution board of sheet steel,dust protected ,dully powder painted,inclusive of 200 As tinned copper bus bar ,Common neutral link,earth bar,din bar for mounting MCB's (but without MCB's and incomer) as required. (Note: vertical type TPDB is normally used where 3 phase outlets are required)

12 way (4+36), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required.

Single Pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

200 mm width X 50 mm depth X 1.6 mm thickness

Supply, Installation, Testing and Commissioing of Carbon Di-oxide Type Fire Extinguisher confirming to IS:15683, ISI Marked, Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ ISI Marked & PESO approved ,Controllable Discharge Mechanism Wheel Type Valve IS:3224 ISI Marked, Discharge Hose with non conducting Horn fitted with Co2 Valve. Operating Temperature :- (-) 20ºC to (+) 55ºC Suitable for ‘B’ ‘C’ Class of FIRE. fully charged i/c providing and fixing of suitable size wall mounting M.S. bracket etc complete as required. 4.5 Kg capacity

Supply, Installation, Testing and Commissioing of 6 Kg. ABC MAP-90% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.

MV Panel - Supply, installation, testing and commissioning of following outdoor type with canopy, min front area 4.8 sq.mtr and 400 mm depth, IP-54 protected M.V. cubicle type totally enclosed, free standing type, dust, damp and vermin proof, MV Panel, busbars, M.V. danger notice plate, interconnections with suitable capacity aluminium leads/solid aluminium strips/rods, connection of incoming and outgoing cables with thimbles, stove enamelled painted and having following incoming and outgoing switchgears complete as required. INCOMER: 100 Amps,415 volts, TP+NL, 25 KA Moulded Case Circuit Breaker with thermal magnetic release having variable current settings . R,Y&B phase indicating lamp (LED type) with 2A control SP MCB ,ON, OFF , TRIP for MCCB Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers. 1 Set of timer switch & 100A TP contactor with nuetral link (for street lights control) . BUSBARS: 125 Amp TPN Aluminium busbars OUTGOING: 2 Nos. 63 Amp 415 volts, FP MCCB 2 Nos. 40 Amp 415 volts, FP MCCB

Supplying of following sizes PVC insulated PVC sheathed XLPE aluminium conductor armoured LT cable of 1100 V as per IS 1554(Part I) and having ISI marking etc. as required

3.5 x 120 sq.mm aluminium conductor

Supplying and making end termination with brass compression gland and Aluminium lugs for following sizes PVC insulated and PVC sheathed / XLPE Aluminium conductor cable of 1.1 KV grade as required.

3.5 x 120 Sq.mm.

Laying of one number PVC Insulated and PVC sheathed/ XLPE Power cable of 1.1 KV Grade of the following size in the existing RCC/Hume/Metal Pipe/Duct as required.

Above 95 Sqmm and up to 185 sqmm

SECTION - 2 (CCTV WORK)

Supply, Installtion, Testing & Commisioning 2MP full real time recording Day & night Dome Camera IP66. 1920 x 1080 @ 25/30fps. 2.7 - 12mm vari-focal. H.264 High Profile. PoE, 24VAC/12VDC. ONVIF. Daynight vision type including base box, screws, accessories, connectors etc. complete.

Supply, Installtion, Testing and Commisioning 2MP(1920x1080) IP66 Real-time 1/2.8 CMOS Sensor Network Box Bullet Camera ,H.264 High Profile. PoE, 24VAC/12VDC. ONVIF.Daynight vision type including base box, screws, accessories, connectors etc. complete.

Supply, Installtion, Testing and Commisioning 32CH NVR upto 8MP resolution support realtime playback, 8 HDDs Hot Swap, 2 eSATA, 2 1000M Ports, Overseas power cords with POE switch 16 TB HDD at D1 Resolution for 30 days Recording with stand.

Supply, Installation & Commissioning of Workstation latest Intel® i7 7th Generation, processor, Intel Chipset motherboard, 8GB DDR3 RAM, 500 GB SATA HDD at 7200 rpm, Graphic card with 2 GB dedicated RAM with display ports/DVI/ HDMI port, DVD writer, Giga LAN Card, Keyboard, optical Mouse , 32" Monitor as per list of approved makes.

Supply, Installation & Commissioning of 42" Monitor complete as required

Supply, Installation, Testing and commissioning of Managable 24 port Switch with Power on Ethernet (PoE) enabled, 10/100, RJ45 Access ports complete as required

SECTION - 3 (LAN & EPBAX WORK)

Supply of Layer -2 Switch with Power on Ethernet (PoE) enabled, 48 x Gigabit RJ45 Access ports with PoE+, including 2 x Combo Gigabit ports, plus 2 x 10 Gigabit SFP+ Uplink ports, and 2 x 10 Gigabit SFP+ dual-use Stack/Uplink ports, All 24 access ports should be capable of providing 30W of Power budget Non-Blocking Switching fabric of 128 GBPS and Forwarding rate of 95 MBPS ,complete as per requirement

Supply, installation, testing and commissioning of Cat 6A Patch/Mounting Cord 1 mtrs as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer(with lock)

Supply, installation, testing and commissioning of 24 Port loaded Patch Panel including adapters etc. as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, laying, installation, testing and Commissioning of 100 mm x 38 mm metal/GI raceway including fixing bracket on surface/recess and vertical/horizontal etc. complete as required.

Supply , Installation, Testing and Comissioning of 42U - Wall/floor mounted Communication rack with fans, two cable managers, stationary cell, 2 Nos. of hardware packets(800mm width x 1000mm depth)with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable. etc complete as required.

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 24 extensions suitable upto 96 extensions complete. additional 16 extension card.

Supply, Installation, Testing, and Commissioning of Basic Push Button Type Analog Phone without display

Supply, Installation, Testing and Commissioing of following sizes of telephone distribution Box in M.S. hinged type lockable box (MDF Box) duly painted complete with Krone type tag block etc. including terminations of cable as required.

Supplying of pairs 0.5mm dia annealed bare copper conductor Polythene (Jelly filled) insulated, core twisted into pairs unarmoured telephone cable on surface/tray with saddels including termination of cables at both sides in Krone Tag Block etc. complete as required.

SECTION - 4 (UPS WORK)

Supply, installation, testing and commissioning of online load sharing UPS system of following ratings with computer communication possibilities consisting of standard software, double conversion system suitable for providing power supply to computers/servers, corridor lighting delivering at least 30minutes backup, suitable for incoming 415volts, 3phase +10% -15%, 50Hz supply and three phase output voltage ,including, rectifier/dual converter, bypass switch, inverter, filter. Bypass & static transfer switch for automatic switch over, providing static by pass module, high switching frequency microprocessor based with built-in technical protections like short circuits, overload, high/low voltage cut off protection of load from source inclusive of bypass facility without giving any break of power. The UPS should have IGBT based rectifier and IGBT based inverter. The UPS should also give minimum>93.5% efficiency in online mode at full load and shall have input THDi less than 3%. input power factor: more than 0.99; THD not exceeding 2%; output voltage tolerance : less than 1%( for static load); Microprocessor / software controlled annunciation, protection(including against input phase reversal), and menu run diagnostic module, associated cabling for connections to battery ,connections ,termination, erection including associated foundation / masonry or RCC work for mounting on base channels etc. complete as required and as per specifications. VRLA Battery Banks, Battery cabin and BCB consisting of 12V battery SMF Type of following VAH capacity and suitable for UPS System for 30 mins backup for individual UPS including interconnection with suitable size copper cable between UPS and battery bank.

10 KVA UPS which will work in Parallel Redundant Mode with battery bank with 12V batteries and minimum 17125VAH capacity

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing kitchen sink including making all connections excluding cost of fittings.

White glazed fire clay sink of size 600x450x250 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal bore

Providing and fixing gun metal non-return valve of approved quality (screwed end) :

25 mm nominal bore

Horizontal

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :

15 mm diameter pipe

20 mm diameter pipe

25 mm diameter pipe

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.

Flexible pipe

40 mm dia

Providing and fixing soil, waste and vent pipes :

100 mm dia

Hubless centrifugally cast (spun) ironpipes epoxy coated inside & outsideIS:15905

75 mm diameter :

Hubless centrifugally cast (spun) ironpipes epoxy coated inside & outsideIS:15905

Providing and fixing bend of required degree with access door, insertionrubber washer 3 mm thick, bolts and nuts complete.

100 mm dia

Hubless centrifugally cast (spun) ironepoxy coated inside & outside as perIS:15905

75 mm dia

Hubless centrifugally cast (spun) ironepoxy coated inside & outside as perIS:15905

Providing and fixing plain bend of required degree.

100 mm dia

Hubless centrifugally cast (spun) ironpipes epoxy coated inside & outsideIS:15905

75 mm dia

Hubless centrifugally cast (spun) ironpipes epoxy coated inside & outsideIS:15905

Providing and fixing single equal plain junction of required degree :

Hubless centrifugally cast (spun) ironepoxy coated inside & outside as perIS:15905

Hubless centrifugally cast (spun) ironepoxy coated inside & outside as perIS:15905

Providing and fixing terminal guard :

Hubless centrifugally cast (spun) ironepoxy coated inside & outside as perIS:15905

Providing and fixing shielded coupling for Hubless centrifugally castiron pipe

100 mm dia

SS 304 grade coupling with EPDM rubbergasket

75 mm dia

SS 304 grade coupling with EPDM rubbergasket

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost ofcutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perIS:15905

Painting sand cast iron/ centrifugally cast (spun) iron soil, wastevent pipes and fittings with two coats of synthetic enamel paint ofany colour such as chocolate grey, or buff etc. over a coat of primer(of approved quality) for new work :

100 mm diameter pipe

75 mm diameter pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With Sewer bricks conforming to IS : 4885

Providing & fixing C.P brass Sink Cock with Regular Swinging Spout (Wall Mounted Model) with Wall Flange. Make : Jaquar, Model No : QQP- 7347PM , or equivalent in other approved makes including cutting and making good the walls wherever required all complete as directed by the Engineer-in-Charge.

Providing & fixing Hand shower(Health Faucet) with 8mm Dia, 1.0 Meter Long Spirochrome Flex Tube & Wall Hook Make : jaquar, Model No : ALD-CHR-587 , or equivalent in other approved makes including cutting and making good the walls wherever required all complete as directed by the Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

110 MM Dimeter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

110 mm bend

Shoe (Plain)

110 mm Shoe

Office Desk Size: 1200Wx600Dx750H mm. Supplying and placing in position of office desk structure of rectangular shape. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the hot melt glue used for fixing the 2mm thick PVC edge banding made of same matte finish, wire management hole with PVC grommet on table top. Right side below table top 2 drawers, in provided with central lock for security and handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with facia of drawers. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Premium Mesh Chair, Medium Back Chair Dimension: 640Wx670Dx1100H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 570mm Supplying, and placing in position of medium back 360° degree revolving. The chair made of full mesh in black colour.It will come in matte finish about style type is modern.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum height is 1000mm. Gas lift 100 mm telescopic hydraulic Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors). The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

3 seater waiting area chair Supplying and placing in position of a 3-seater waiting area Chair (4 arms + 2 legs+2 sokets ) 1. Arm and leg: Aluminum alloy by a whole die-casting molding., 2. Seat & backrest: 100% pure polyurethane (PU) injection + 1.8mm steel frame inside., 3. Beam: 1.8mm iron, octagonal beam, 4. Metal color: Flash silver 5. Seat width: 520mm, 7. PU color: optional, 8. Armrests for each seat. 9.With Switch Socket, 10. Without Side Table The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

2 seater waiting area chair Supplying and placing in position of a 2-seater waiting area Chair (3 arms + 2 legs+2 sokets ) 1. Arm and leg: Aluminum alloy by a whole die-casting molding., 2. Seat & backrest: 100% pure polyurethane (PU) injection + 1.8mm steel frame inside., 3. Beam: 1.8mm iron, octagonal beam, 4. Metal color: Flash silver 5. Seat width: 520mm, 7. PU color: optional, 8. Armrests for each seat. 9.With Switch Socket, 10. Without Side TableThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

3 Seater Sofa (preferably in Turkish Blue) Dimension (W) 1700mm X (D) 940mm X (H) 900mm Seating Height 450mm, Arm height 615mm, Seat Depth 580mm, Seat Width 1460mm, Back Height 455mm Material & Subtype PVC, Fabric - Linen, Composition Polyester, Frame Material Solid Wood, Upholstery Material Fabric - Linen, Filling Material Foam Seat Material Fabric - Linen, Leg Material PVC, Finish Matte The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Solid Wood Coffee Table Size: 1130Wx630Dx410H mm. Supplying, and placing in position of Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee.Material & Subtype: Solid Wood - Beech Wood, Table Top Material: Clear Glass, Frame Material: Solid Wood, Leg Material: Solid Wood, Finish: Matte, Colour & Colour Family: Brown - Walnut The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Solid Wood Side Table Size: 680Wx530Dx450H mm. Supplying, and placing in position of Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee. Material & Subtype: Solid Wood - Beech Wood, Table Top Material: Clear Glass, Frame Material: Solid Wood, Leg Material: Solid Wood, Finish: Matte, Colour & Colour Family: Brown - Walnut The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Racks Size: 900Wx450Dx2000H mm. Supplying and placing in position of slotted angle rack as per photograph. the rack shelf panel shall be made of 0.9mm thick. the complete rack metal haing 20 gauge. 7 shelves including top & bottom,these components shall be made of crca ‘d’ grade high yield strength as per is:513 & is:304 grade.Angles : 40mm x 40mm x 2mm(thick). Shelf : 36x15x1mm crca sheet. steel components are pre is:304 grade treated with anti rust treatment and duly powder coated minimum 50 microns as per approved shades. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Conference Table Size: 7950Wx2550Dx750H mm. CP1200Wx600Dx750H mm. = 02 nos. SP1: 1350Wx600Dx750H mm. = 10 nos. SP2: 750Wx600Dx750H mm. = 02 nos. providing & supplying u - shape modern design conference table & in between u shape table top length is @ 1350 mm, tabletop offers you a generous workspace,desk primary work surface use premium quality materials over all size is 1200mm(l)x 600mm(d)x 750mm(h) table top made of 36mm thick which give more surface area for work ,machine made modular furniture made prelaminated particle board of grade ii type iii of is 12823/latest, construction provision of conference tabletop supported with 18mm thick side pannels in brown-black oak colour made by prelaminated particle board and below the top 18mm thick prelam particle board modesty panel.our work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade,fixed with hot melt glue. three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest, The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, SEFA, Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org”

Premium Mesh Chair, Medium Back Chair Dimension: 640Wx670Dx1100H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 570mm Supplying, and placing in position of medium back 360° degree revolving. The chair made of full mesh in black colour.It will come in matte finish about style type is modern.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum height is 1000mm. Gas lift 100 mm telescopic hydraulic Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors). The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Filing Storage Size: 915Wx480Dx1980H mm. Supplying, and placing in position of modular garner filing storage body made out in 22-gauge(0.8mm) & door 20-gauge (1 mm) CRCA sheet. 4 adjustable shelve in 22 gauge(0.8mm) & pedestal 18-gauge 1.2 mm CRCA sheet high yield strength. these components shall be made of CRCA ‘d’ grade high yield strength as per is:513 & is:304 grade. the store well plain should have a Mazak handle and three-way locking mechanism with shooting bolts. Storage having four shelves making five compartment, uniformly distributed load capacity of each shelf shall be 60 kg maximum, fitted with Ms body lock & handle. finishing with epoxy polyester powder coated to the thickness 50-60 microns (+/-5 micron), it should also have a m10 screw type leveller. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Stainless Steel Dustbins - Single Dustbins made of 18 gauge SS-304 grade stainless steel hairline finish of 400 mm external dia. 750 mm height with 300 mm dia round opening at top with PU coating including 125 mm high AAI Blue colour Logo, colour coded waste description sticker and neoprene gasket ring at bottom. The dustbin should have removable cover, provision of clipping poly bag complete as per design drawing No: PLG/A9/STD/DB/01 and directions of Engineer in charge. The dustbin shall display sticker indicating type of garbage and the top shall be finished with approved shade of PU Coating as per the instructions of Engineer- in-Charge. [One make-up sample to be supplied at the site according to the drawings and directions of EIC and approval shall be taken from EIC for further fabrication and supply of balance Dustbins. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.org all complete as per specifications and direction of Engineer-in-Charge.

Supply, Installation, Testing and Comissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface /concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) Vc drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celcius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply: Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS: 1391 Part II 2023. The system shall be able to operate up to 50°C (out door ambient temperature). Inverter Type-Cooling only BEE-5 STAR RATED

Supply, Installation, testing and commissioning including vaccumlazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with sultable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required:

6.4 mm dia (OD) (Soft Drawn) with tube thickness 1.2mm

9.5 mm dia (OD) (Soft Drawn) with tube thickness 1.2mm

12.7 mm dia (OD) (Soft Drawn) with tube thickness 1.2mm

15.86 mm dia (OD) (Soft Drawn) with tube thickness 1.2mm

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."