Construction of 1no. 100 seated ST Girls Hostel at Govt. Girls High School, Nuagaon under Nuagaon block (B-Block).

Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.

Supplying of filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.

First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

Foundation & Plinth

Footing

Pedestal

Column from Pedestal top to NGL

Column from NGL to PL

Plinth Beam

Column from PL to Ground floor Roof

Roof beam

Roof slab

Lintel

Staircase

Chajjah

Platform & Shelves

First Floor

Column from PL to Ground floor Roof

Roof beam

Roof slab

Lintel

Staircase

Chajjah

Coloumn

First Floor

Column from PL to Ground floor Roof

Roof beam

Roof slab

Lintel

Terrace floor

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Terrace Floor

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Super structure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

Platform & Shelves

Fly Ash Brick Masonry in cement mortar of mix (1:4) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Superstructure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties ,all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge. (External wall)

Platform & Shelves

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge. (Internal wall)

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing, rounding of corners etc. complete with cost,conveyance,loading, unloading, royalities and taxes of all materials,cost of all labour,T&P and scaffolding required for the work etc. as directed by the Engineer-in-charge.

Platform & Shelves

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Finishing plastered surfaces of walls with cement based wall putty (Water bas

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

ed) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Priming one coat with water bound wall primer.

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Distempering two coats to walls with distemper of approved shade on new work to give an even shade

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.

Platform & Shelves

Providing 16mm. thick finished Kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope joining the Kota stone with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge.

Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for thr required period, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. in all floors at all height complete in all respect as directed by the Engineer-in-charge.

Platform & Shelves

Second Floor

Platform & Shelves

Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 400 mm x400 mm, confirming to I.S 13755 of approved quality and shade in floors, treads on steps and landings on 20 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp river sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments (Tiles are to be immersed in the water for required time before use) of approved make to match the shades of the Ceramic Floor Tiles if required including cost, conveyance, loading, unloading, stacking, royalties , all taxes,rubbing, cost of all Labour, Labour cess ,Sundries, T&P required for the work , Watering , Curing for required days , cleaning the flooring space manually etc. complete in all respect as directed by the Engineer-in-charge.

Supplying, fitting & fixing of 30cm x 20cm/20cm x 20cm special plain/printed series Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.

Providing and fixing of Aluminium Sliding window with Acrylic Sheet

Providing and fixing of Aluminium Ventilator with Acrylic sheet louver

Providing and fixing ISI marked 35mm thick Flush door shutter conforming to IS:2202 (Part I), decorative type core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc complete.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat (Graphite grey colour) comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. ( Frame size 62 x 100 mm) (Make: Century /Floresta/ ALSTONE)

Providing and fixing factory made single extruded 30 mm thick WPC solid decorative type Flush door shutter with both side 1mm thick laminate finish of required size comprising of virgin polymer of K value 58-60calcium carbonate and natural fibers and non-toxic additives having minimum density of 650kg/cum and screw withdrawl strength of 1800N (fACE) & 900N (Edge) minimum compressive strength 50 N / MM2,modulus of elasticity 850N/mm2, and resistance to spread of flame of class A Category with property of being termite/borer proof , water / moisture proof and fire retandant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melted adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw,SS Handle, Door stopper, SS Hinges, Sliding door bolt etc. all as per direction of EIC. (Make: Century /Floresta/ ALSTONE)

Platform & Shelves

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 excluding the cost of Red Oxide Primer as per the design approve by E.I.C including cost, conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.

20mm thick Grading Plaster

Sunken treatment

Stage 1: Cleaning of concrete surface to remove dust, oil, grease including removal of laitance and cleaning with compressed air. Repairing surface irregularities, damag

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.

Making plinth protection 50mm thick of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m complete as per direction of Engineer-in-charge.

Providing and fixing in position 50mm thick precast cement concrete jally (1:2:4) hard granite chips including, roughening , cleaning , fixing and finishing in cement mortar (1:3)etc complete.

Boundary Wall & Gateway

First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.

Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 50m and lift upto 1.5m) as directed by the Engineer-In-charge.

Disposal of surplus excavated materials by mechanical means from the work side etc. complete upto 5km. Lead.

RCC in Footing

RCC in Tie beam

RCC in Pedestal

RCC in Column

RCC in Band

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

RCC Roof slab

RCC Roof beam

Finishing plastered surfaces of walls with cement based wall putty (Water bas

Priming one coat with water bound wall primer.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat (Graphite grey colour) comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. ( Frame size 62 x 100 mm) (Make: Century /Floresta/ ALSTONE)

Providing and fixing factory made single extruded 30 mm thick WPC solid decorative type Flush door shutter with both side 1mm thick laminate finish of required size comprising of virgin polymer of K value 58-60calcium carbonate and natural fibers and non-toxic additives having minimum density of 650kg/cum and screw withdrawl strength of 1800N (fACE) & 900N (Edge) minimum compressive strength 50 N / MM2,modulus of elasticity 850N/mm2, and resistance to spread of flame of class A Category with property of being termite/borer proof , water / moisture proof and fire retandant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melted adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw,SS Handle, Door stopper, SS Hinges, Sliding door bolt etc. all as per direction of EIC. (Make: Century /Floresta/ ALSTONE)

Cutting,straightening coiled or bent up HYSD/TMT 550D Reinforcement Bars confirming to IS 1786:2008 welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved designs and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)

Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Super structure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.

Making plinth protection 50mm thick of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m complete as per direction of Engineer-in-charge.

First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.

Supplying and Fixing of Elastomeric membranes of 200 x 2mm size for expansion joint sealing from approved manufacture fixing with epoxy adhesive of approved quality complete.

Pathway

Providing and laying approved colour 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 75mm thick sand filling as per drawing, specification and direction of Engineer-in-charge.

Providing & Painting with Synthetic Enamel Paint of approved brand and manu

facture to give an even shade as per the instruction of Engineer-in- charge at all floors and all heights including all materials & labour complete.

ELECTRIFICATION

INTERNAL

Sub-Head I (modular Wiring Items)

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC /Precision/ Norpak/ Anchor/ Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

GROUP-A

GROUP-B

GROUP-C

Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) with suitable size modular box & coverincluding supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider (Zencelo)/ legrand( Myrius)/ Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex /Anchor /Polycab /HAVELLS /RR KABLE /KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor /Polycab /HAVELLS/ RR KABLE /KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG /BEC /Precision /Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG /BEC/ Precision/ Norpak/ Anchor /Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor /Polycab /HAVELLS /RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG /BEC/ Precision /Norpak /Anchor /Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor /Polycab /HAVELLS /RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG /BEC /Precision /Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Cha

rge.4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)

Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)

Sub-Head II (Light fitting Fixture & Fan)

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.

Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/ Crompton/ Usha/ Orient /Bajaj ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)

Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 36W (595X595X70MM)and system lumens output not less than 4680 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.

Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .

SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton /Bajaj)The luminaire should be Replacement Warranty will be 2 years

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

BDBS,DB,AC DB,FLOOR PANELS,MCBS

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years

2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years

Supplying and fixing 20 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.

畓灰祬湩⁧湡⁤楦楸杮㘠愠灭⁳潴㌠′浡獰爠瑡湩Ⱨ㈠〴瘠汯獴‬⁃敳楲獥ㄬ䬰⁁牢慥楫杮挠灡捡瑩ⱹ猠湩汧⁥潰敬⁳䍍⁂景†䴠歡ⵥ䕌則乁ⵄ塄⼳匠敩敭獮䈭瑥条慵摲 捓湨楥敤⵲䄠瑣⁩⸹†桴⁥硥獩楴杮䴠䉃䐠⁂潣灭敬整眠瑩⁨潣湮捥楴湯⁳獡瀠牥搠物捥楴湯漠⁦湅杧⴮湩䌭慨杲⹥†圮牡慲瑮⁹湯䴠䉃椠⁳″敹牡⹳o§Ŏ匀灵汰楹杮愠摮映硩湩⁧〴䄠灭

⁥慣汢⁥牴祡猠慨汬戠⁥慧癬湡獩摥映牯挠牯潲楳湯瀠潲整瑣潩潣普物業杮琠䥄⁎久ㄠ㌰㘴䤯体ㄠ㘴⸱匠穩⁥〶浭䠨 ⁸〲洰⡭⥗†景䴠䭁ⵅ倠潲慦⽢䉏⽏敎摩硡吮敨䰠慯⁤敢牡湩⁧慣慰楣祴漠⁦桴⁥慃汢⁥牔祡⁳猠潨汵⁤敢洠湩浩浵漠⁦ㄠ㐰㠮杋洯瑥牥愠⁴桴⁥灳湡漠⁦ㄠ㔮敍整⁲獡瀠牥唠⁌灳捥晩捩瑡潩獮†獡爠煥極敲⁤獡瀠牥搠物捥楴湯漠⁦湅杧⴮湩䌭慨杲⹥ĬľūȈ匀灵汰楹杮昬硩湩⁧景†䱆住⁒䅒䕃圠奁圠呉⁈啊䍎䥔乏戠硯䜠䱁䅖䥎䕚⡄䍇 祴数†十倠剅䔠ⵎ卉ⵏ㐱ㄶⰠ†眠瑩⁨湩整湲污搠浩湥楳湯⁳景†楳敺㌠洸⡭⥈砠㈠㔲浭在Ⱙ††景††䅍䕋‭牐景扡伯佂丯楥慤⁸⸠在瑩⁨污捡散獳牯敩ⱳ敢摮挬癯牥猬灵潰瑲牥圩呉⁈䕒啑剉䑅匠婉䑅䨠乕呃佉⁎佂⁘䌬噏剅䌠乏䕎呃剏†獡爠煥極敲⁤獡瀠牥搠物捥楴湯漠⁦湅杧⴮湩䌭慨杲⹥㌨䌠䵏䅐呒䕍呎吠呏䱁㔠‴䵍䠠䥅䡇⹔§¸䘀剉⁅䥆䡇䥔䝎匠卙䕔్塅䥔䝎䥕䡓剅ƽ倀潲楶楤杮愠摮映硩湩⁧慣扲湯搭⵩硯摩⁥祴数映物⁥硥楴杮極桳牥⁳潣獮獩楴杮漠⁦敷摬摥䴠匮挠汹湩牤捩污戠摯ⱹ猠畱敥敺氠癥牥搠獩档湡敧瘠污敶映瑩整⁤楷桴瀠敲獳牵⁥湩楤慣楴杮朠畡敧椠瑮牥慮楤捳慨杲⁥畴敢‬〳浣⁳潬杮栠杩⁨牰獥畳敲搠獩档牡敧栠獯ⱥ搠獩档牡敧渠穯決ⱥ猠獵数獮潩牢捡敫ⱴ挠湯潦浲湩⁧潴䤠⁓›㠲㠷映湩獩敨⁤硥整湲污祬眠瑩⁨敲⁤湥浡汥瀠楡瑮愠摮映硩摥琠眠污楷桴戠慲正瑥⁳潣灭敬整眠瑩⁨湩整湲污挠慨杲⹥慍敫‭慓敦⽸䘠物獥楨汥⽤態敮⽸䌠慥敳楦敲䌀灡捡瑩⁹⸴‵杫ƪ倀潲楶楤杮愠摮映硩湩⁧䉁⁃祴数映物⁥硥楴杮極桳牥⁳潣獮獩楴杮漠⁦敷摬摥䴠匮挠汹湩牤捩污戠摯ⱹ猠畱敥敺氠癥牥搠獩档湡敧瘠污敶映瑩整⁤楷桴瀠敲獳牵⁥湩楤慣楴杮朠畡敧椠瑮牥慮楤捳慨杲⁥畴敢‬〳浣⁳潬杮栠杩⁨牰獥畳敲搠獩档牡敧栠獯ⱥ搠獩档牡敧渠穯決ⱥ猠獵数獮潩牢捡敫ⱴ挠湯潦浲湩⁧潴䤠⁓楦楮桳摥攠瑸牥慮汬⁹楷桴爠摥攠慮敭慰湩⁴湡⁤楦數⁤潴†慷汬眠瑩⁨牢捡敫獴挠浯汰瑥⁥楷桴椠瑮牥慮档牡敧䴮歡ⵥ匠晡硥 楆敲桳敩摬䬯湡硥 敃獡晥物൥慃慰楣祴㘠欠靧
畓灰祬湩⁧湡⁤湩瑳污楬杮愠⁴灡牰癯摥氠捯瑡潩灡牰癯摥洠歡⁥楦敲戠捵敫獴愠⁴㐲朠畡敧朠污慶楮敺⁤瑳敳汥猠敨瑥‬瑳湡慤摲㤠氠瑩牥⁳慣慰楣祴愠摮漠⁦潲湵⁤潢瑴浯猠慨数‬慰湩整⁤桷瑩⁥湩楳敤愠摮爠摥漠瑵楳敤愠摮戠慬正漠桴⁥潢瑴浯‬湩捳楲敢⁤楷桴氠瑥整⁲䘢剉≅椠汢捡湡⁤潧摬‮䌠獯⁴桳污敢椠据畬楳敶漠⁦牐癯摩湩⁧卍猠慴摮搠汵⁹慰湩整⁤癯牥愠挠慯⁴景瀠楲敭⁲漨敮猠慴摮猠慨汬戠⁥畳瑩扡敬映牯栠湡楧杮㔠戠捵敫獴ᰮ䥌䡇䕔䥎䝎倠佒䕔呃佉⁎奓呓䵅Ȉ䰀杩瑨楮杮倠潲整瑣潩ⴺ匠灵汰⁹景㠠洠汁浵湩浵删畯摮䌠湯畤瑣牯吮獥整⁤獡瀠牥䤠䍅㘠㔲ㄶ‮獡瀠牥搠物捥楴湯漠⁦湥楧敮牥椠档牡敧䴮歡ⵥ䉏⽏敄湨Ő匀灵汰⁹景删潯⁦潣摮捵潴⁲潨摬牥映牯瀠牡灡瑥‭潐祬浡摩䍥湯畤瑣牯栠汯敤㩲楗桴䴠‸敦慭敬琠牨慥⁤牯搠慩敭整⁲洷Ɑ䴠匸牣睥琠潣湮捥⁴桴⁥潣摮捵潴⁲潨摬牥圮慥桴牥愠摮整灭牥瑡牵⁥敲楳瑳湡⁴牦浯ⴠ㔳琠㤫‰敤牧敥䌠汥楳獵琠獥整⹤䌊湯畤瑣牯栠汯敤⁲⁀‱敭整⁲楤瑳湡散吮獥整⁤獡瀠牥䤠䍅㘠㔲ㄶ‮愠⁳数⁲楤敲瑣潩景攠杮湩敥⁲湩挠慨杲⹥慍敫伭佂䐯桥畓灰祬漠⁦潐祬浡摩⁥潲景挠扡敬栠汯敤⁲潦⁲汦瑡爠潯㩦䥄⁎㠴㈸‹潆浲䈠⸱䌠潬敳⁤潦浲眠瑩⁨潢瑴浯‮楆汬湩⁧敷杩瑨䬱⁧昨潲瑳爭獥獩慴瑮挠湯牣瑥⥥‮汓敥敶映潲潰祬瑥票敬敮‬汢捡䁫ㄠ洠瑥牥搠獩慴据⹥吠獥整⁤獡瀠牥䤠䍅㘠㔲ㄶ‮慍敫伭佂䐯桥썮畓灰祬漠⁦潃湮捥潴㩲䘠牯吠挠潲獳愠摮瀠牡污敬潣湮捥潴獲‮畑捩楫獮慴汬瑡潩獵湩⁧敨慸潧慮潢瑬䴠〱㍘‰楨桧札慲敤栠瑯搠灩慧癬湡獩摥‮敔瑳摥愠⁳数⁲䕉⁃㈶㘵⸱㈨潮⽳硥慰獮潩楰捥⁥⸩慍敫伭佂䐯桥ၮ
畓灰祬漠⁦敖瑲捩污愠物琠牥業慮楷桴愠捣獥潳楲獥债潲楶楤杮漠⁦楁⁲整浲湩污慳⁳数⁲卉䤭䍅ⴠ㈶〳‵慰瑲㌭丠浯湩污猠穩⁥㇘⼰㘱洠污浵湩畩潲㩤″瑍⁲楁瑲牥業慮㩬猠浥⵩慨摲⠠ⵅ汁杍楓㕏挠牯敲灳湯獤琠䥄㑎㠸㄰ 畓瑩扡敬映牯栠杩⁨楷摮氠慯⹤敔瑳摥愠⁳数⁲䕉⁃㈶㘵⸱䴠歡ⵥ䉏⽏敄湨¬匀灵汰⁹潦⁲牐癯摩湩⁧景匠慴摮映牯䘠湡⁧楆⁸祳瑳浥ㄠ‶杫眠瑩⁨慢敳愠摮汣浡⁰洬摡⁥灵漠⁦牦獯⁴敲楳瑳湡⁴潣据敲整愠摮挠慬灭琠獥整畤瑰〱䬰⁁楬桧湴湩⁧畣牲湥⁴‮慍敫伭佂䐯桥楮畓灰祬映牯倠潲楶楤杮漠⁦瑓湡⁤潦⁲慆杮䘠硩猠獹整㘱欠⁧慭敤甠⁰景映潲瑳敲楳瑳湡⁴潣据敲整‮慍敫伭佂䐯桥쥮畓灰祬漠⁦敔瑳䨠楯瑮⠠潆摬湩⁧汃浡⥰猠極慴汢⁥潴挠湯敮瑣㠠浭潲湵⁤潣摮捵潴⁲湡⁤慭⁸祢㌠砰″浭䜠⁉瑳楲⁰獡猠数楣楦摥椠摮慲楷杮愠摮搠物捥整⁤祢䔠杮湩敥⹲敔瑳摥映牯ㄠ〰䅫氠杩瑨楮杮挠牵敲瑮‮慍敫伭佂䐯桥衮畓灰祬漠⁦偉㘠‶潐祬倠潲祰敬敮䨠湵瑣潩潂⹸䤠獮慴汬瑡潩瑡ㄠ瑍⁲效杩瑨潆⁲敔瑳䨠楯瑮⸠湉整湲污搠浩湥楳湯㩳ㄠ〰ㅸ〰㑸‸浭䴠歡ⵥ䉏⽏敄湨±匀灵汰⁹景䜠污慶楮敳⁤瑓敥汆瑡㌠堰″浭琠楨正敮獳映潲慥瑲敨敬瑣潲敤搠物捥汴⁹湩朠潲湵⁤獡爠煥極敲⹤䘠慬⁴潣摮捵潴⁲潈䑴灩数⁤慇癬湡穩摥‮敔瑳摥愠⁳数⁲䕉⁃㈶㘵⸱䴠歡ⵥ䉏⽏敄湨¶匀灵汰⁹潦⁲牐癯摩湩⁧景䌠潲獳挠湯敮瑣牯映牯䘠慬㩴匠極慴汢⁥潦⁲〳浭䜠污慶楮敳⁤瑳敥瑳楲⹰䤠獮慴汬摥眠瑩⁨‴潮⁳景栠硥条湯污瀠慬整‮敔瑳摥映牯ㄠ〰䅫氠杩瑨楮杮挠牵敲瑮‮慍敫伭佂䐯桥畓灰祬漠⁦汦瑡挠湯畤瑣牯栠汯敤⵲䘠瑩›䱆㌠ⰰ圠瑩⁨潭湵楴杮栠汯㙥㈮砠㈠′浭‬楗桴㈠挠汹湩敤⁲潢瑬⁳㙍砠ㄠ‶湡⁤癯牥瀭敩散映潲桭瑯搭灩朠污慶楮敳⁤瑳敥ⱬ䈠瑯潴敳瑣潩牦浯瀠汯慹業敤‬汢捡⹫吊獥整⁤獡瀠牥䤠䍅㘠㔲ㄶ‮慍敫伭佂䐯桥鱮畓灰祬映牯倠潲楶楤杮漠⁦汐獡楴⁣潃牲獯潩牐瑯捥楴湯猠牴灩›灁牰硯ㄠㄮ洠桴捩⹫圠摩桴㔠洰⹭䴠摡⁥景瀠瑥潲慬畴⵭挠慯整⁤档浥捩污映扩敲映扡楲⹣䴠歡ⵥ䉏⽏敄湨É匀灵汰⁹景唠⁌楌瑳摥洠楡瑮湥湡散映敲⁥䰬睯挠牡潢潣灰牥潣瑡摥攠牡桴爠摯漠⁦″敭牴⁥汥捥牴摯⁥慨楶杮搠慩敭整⁲景ㄠ⸷洲楷桴挠灯数⁲潣瑡湩⁧桴捩湫獥⁳景㈠〵業牣湯琠獥整⁤獡瀠牥䤠䍅㘠㔲ㄶ㈭䴠歡ⵥ䉏⽏敄湨U匀灵汰⁹景甠楮敶獲污挠慬灭洠摡⁥景匠⁓潴挠湯敮瑣爠摯眠瑩⁨汦瑡挠湯畤瑣牯䴠歡ⵥ䉏⽏敄湨匀灵汰⁹景䔠牡桴挠湯畤瑣癩瑩⁹湥慨据湩⁧業敮慲潣灭畯摮猠慨汬戠⁥景㈠‵杫瀯瑩琠獥整⁤獡瀠牥䤠䍅㘠㔲ㄶ㜭听䱃⁐整瑳摥䴠歡ⵥ䉏⽏敄湨¦匀灵汰⁹景吠敨愠潢敶愠牲湡敧敭瑮⁳桳污敢瀠潲楶敤⁤楷桴䠠慥祶搠瑵⁹慥瑲⁨档浡数⁲景㔠〰欰⁧潬摡戠慥楲杮挠灡捡瑩⁹潴攠獮牵⁥桴⁥慳敦祴漠⁦慥瑲楨杮猠獹整慍敫伭佂䐯桥卓匠牣睥䴠〱㕘洰Ɑ丨湯传佂䤠整⥭倀䍖匠敬癥ⱥㄴ浭⠠低⁎䉏⁏瑉浥攩湉瑳污慬楴湯漠⁦桔⁥扡癯⁥牡慲杮浥湥獴椠据畬楤杮愠汬愠捣獥潳楲獥愠⁳数⁲楄敲瑣潩景䔠杮⹧䤠档牡敧ฮ䡐☠匠乁呉剁⁙ 匀灥楴⁣慔歮ś䔀牡桴潷歲椠硥慣慶楴湯椠污祴数⁳景猠楯潦⁲楳整氠癥汥湩Ⱨ映畯摮瑡潩Ɱ瀠瑩ⱳ琠敲据敨⁳愠摮漠桴牥挠癩汩眠牯獫甠瑰湡⁤湩汣摵湩⁧⸱洵瑥敲搠灥桴愠摮猠慴正湩⁧桴⁥潳汩甠瑰⁡敬摡漠⁦〱‰敭牴⁥湡⁤湩汣摵湩⁧敤慷整楲杮‬敲潭楶杮猠畬桳‬桳牯湩⁧湡⁤瑳畲瑴湩⁧愨⁳敲畱物摥Ⱙ挠浯汰瑥⁥獡瀠牥猠数楣楦慣楴湯愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥䤭⵮桃牡敧‮⠀⥁灕潴ㄠ㔮⁍敄瑰ᝨ
楆汬湩⁧瑡愠汬搠灥桴眠瑩⁨癡楡慬汢⁥硥慣慶整⁤慥瑲⁨攨捸畬楤杮爠捯⥫椠牴湥档獥‬汰湩桴‬楳敤⁳景映畯摮瑡潩獮攠捴‮湩氠祡牥⁳潮⁴硥散摥湩⁧㔱浣椠敤瑰㩨†潣獮汯摩瑡湩⁧慥档搠灥獯瑩摥氠祡牥戠⁹慲浭湩⁧湡⁤慷整楲杮挠浯汰瑥⁥氨慥⁤灵潴ㄠ〰⥭愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥䤭⵮档牡敧휮畓灰祬湩⁧景†楦汬湩⁧慳摮椠潦湵慤楴湯愠摮漠敶⁲牡慥⁳湩汣摵湩⁧慷整楲杮‬慲浭湩Ⱨ挠湯潳楬慤楴杮愠摮搠敲獳湩Ⱨ氠扡畯獲‬潴汯ⱳ琠硡獥攠捴Ⱞ愠汬挠浯汰瑥⁥獡瀠牥琠敨猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦湅楧敮牥䤭⵮桃牡敧〮牐癯摩湩⁧湡⁤慬楹杮瀠慬湩挠浥湥⁴潣据敲整漠⁦牰灯牯楴湯⠠㨱㨳⤶椠潦湵慤楴湯愠摮映潬牯⁳獵湩⁧‴浣‮楳敺戠慬正栠牡⁤牣獵敨⁲牢歯湥朠慲楮整猠潴敮洠瑥污愠摮猠牣敥敮⁤湡⁤慷桳摥猠慨灲猠湡⁤潦⁲潭瑲牡漠⁦灡牰癯摥焠慵楬祴愠摮映潲灡牰癯摥焠慵牲⁹湩汣摵湩⁧潨獩楴杮‬潬敷楲杮‬慬楹杮挠湯牣瑥ⱥ爠浡業杮‬慷整楲杮愠摮挠牵湩⁧瑥⹣挠浯汰瑥⁥潴爠煥極敲⁤敬敶獬氠楡⁤湩氠祡牥⁳潮⁴硥散摥湩⁧㔱挠⹭琠楨正椠慥档氠祡牥椠据畬楤杮挠獯ⱴ挠湯敶慹据ⱥ爠祯污楴獥愠摮挠獯⁴景愠汬氠扡畯獲氬扡畯⁲散獳‬♔⁐瑥⁣潣灭敬整愠⁳数⁲灳捥晩捩瑡潩…楤敲瑣潩景琠敨䔠杮湩敥⵲湩挭慨杲⹥Ԃ倀潲楶楤杮‬楬瑦湩Ⱨ栠楯瑳湩⁧湡⁤慬楹杮删楥普牯散⁤散敭瑮挠湯牣瑥⁥景䴠㈭‵牧摡⁥獡瀠牥愠灰潲敶⁤敤楳湧⁳湡⁤牤睡湩獧栠癡湩⁧⁡業楮畭潣灭敲獳癩⁥瑳敲杮桴⠠湩眠牯整瑳 㔲‰杋‮ 煓慵敲挠⹭椠㔱挠⹭挠扵獥愠⁴㠲搠祡⁳晡整⁲業楸杮愠摮琠獥⁴潣摮捵整⁤湩愠捣牯慤据⁥楷桴䤠匮‮ㄵ‶獵湩⁧㈱洠⹭琠〲洠⹭猠穩⁥汢捡慨摲挠畲桳摥戠潲敫牧湡瑩⁥瑳湯⁥档灩⁳湡⁤捳敲湥摥愠摮眠獡敨⁤桳牡⁰慳摮映牯洠牯慴⁲景愠灰潲敶⁤畱污瑩⁹牦浯愠灰潲敶⁤畱牡祲‬慷桳摥愠摮†汣慥敮⁤ 〲浭‮楳敺挠楨獰渠瑯琠硥散摥⁳㔲┠⤠琠敢洠硩摥椠潣据敲整洠硩畴敲眠瑩⁨潐瑲慬摮†汳条挠浥湥⁴倨䍓 湩汣摵湩⁧潨獩楴杮‬潬敷楲杮‬慬楹杮愠摮挠浯慰瑣潩潣据敲整戠⁹獵湩⁧楶牢瑡牯ⱳ眠瑡牥湩⁧湡⁤畣楲杮映牯㈠‸慤獹‬散瑮牥湩⁧湡⁤桳瑵整楲杮琠敨晡整⁲楤浳湡汴湩⁧湡⁤敲潭楶杮搠扥楲⁳牦浯琠敨眠牯楳整愠摮映湩獩楨杮琠敨攠灸獯摥猠牵慦散猠潭瑯⁨牰癯摩湩⁧牧潯敶⁳牯戠慥獤眠敨敲敶⁲敮散獳牡⁹湩汣摵湩⁧潣瑳‬潣癮祥湡散‬潬摡湩Ⱨ甠汮慯楤杮‬潲慹瑬敩⁳湡⁤慴數⁳景愠汬洠瑡牥慩獬愠摮挠獯⁴景愠汬氠扡畯獲‬畳摮楲獥‬⁔…⁐敲畱物摥漠⁦桴⁥潷歲攠捴‮潣灭敬整椠污敲灳捥⁴獡搠物捥整⁤祢琠敨䔠杮湩敥⵲湩䌭慨杲⹥䈠瑵攠捸畬楤杮挠獯⁴湡⁤潣癮祥湡散漠⁦⹍⹓爠摯⁳牯吠牯猠整汥愠摮戠湩楤杮眠物獥愠摮氠扡畯⁲档牡敧⁳潦⁲瑳慲杩瑨湥湩Ⱨ挠瑵楴杮‬敢摮湩⁧瑥⹣漠⁦⹍⹓爠摯⁳牯琠牯猠整汥琠楹杮琠敨朠楲汬⁳湡⁤汰捡湩⁧湩瀠潲数⁲潰楳楴湯ܮ⥡䈠獡୥⥢删䍃

Wallc) Slabƒ
Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-In-Charge.Cold Twisted bars, Thermo-Mechanically-treated bars.ç12mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4 fine sand) including neat cement punning & necessary scaffolding, curing etc. all complete at all floors and all heights.SOAK PIT(B)From 1.5M Upto 3.0M DepthËBrick work with Fly Ash. Bricks in cement mortar (1:6) in super structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary.a) Slab BORE- WELL"Labour for drinlling a perfectly vertical bore hole of 200mm(8") dia for a specified depth below ground level inall kinds of soil by DTH/ODEX rig so as to lower the G.I/PVC casing pipes of 200mm dia fitted with or without socket as the case may be as per direction of Engineering-in-charge incluiding deployment of DTH/ODEX rig with its accessories , T&P and all consumables etc. all complete. 200MM DIA to 200 mtrs (DTH) (Video PHD S/R P-61 Item no.5.2.1)®
Ì
_
Labour for lowerring the followng size of ms/pvc casing pipe with or without slotted pipes as per necessity form ground level & fixed perfectly vertical position incluiding pluging the tube well prevent entry of foreign materials from above 0 to 200 Mtrs (Video PHD S/R P-80 Item NO.11 SCh .80)ðþ†Cost of 200mm dia 0 to 65 mtrs (Video PHD S/R P-61 Item NO.5.2.2)·Clearing and developing of the T.Well with their own compressor countinuously worked for 2 hours till clear and adequate discharge is obtained with supply of T&P , all equipments etc.Cost of submerssible Pump (1HP)CLabour Charges for lowerig of submerssible Pump etc. alla completedCost of 4.0 sqm Copper Cable !Cost of Pannel Board with all set Cost of ClampCost of HDPE pipe 25mm dia 25mm dia PVC Pipe 25mm dia Fullway valvesupplying and fitting Pvc tapcost of nylone rope %cost of G.I fitting etc all compelete@supplying fitting and fixing of Hand pump with all acessoceries 10 mm service wire!25/40 mm dia G.I. Socet /R socket Massari JaliHOSTEL BUILDING WATER SUPPLY.2Supplying, installing, fixing, jointing, testing and commissioning of approved make. Chlorinated Polyvinyl Chloride pipes (CPVC) SDR.11 pipes confirming to ASTM standards with necessary fittings for inetrnal toilet water supply upto 50 dia , and above 50mm dia pipe schedule 40 with fitting shall be schedule 80 ASTM IPS. The fittings and specials such as tees, elbows,couplers, bends, enlargers etc.,m with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement martor 1:1 restore the same original condition neately as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846 and above 50mm dia primer P-70, and solvent confirming to ASTM F-4931 / 724 All exposed pipe shall be painted with latex paint. (for shafts, basement ceiling ringmain Terrace & PRM).The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/ASTRAL.1720 mm dia C-PVC pipe SDR.11 (Supreme/Ashirbad/ASTRAL.)725 mm dia C-PVC pipe SDR.11 (Supreme/Ashirbad/ASTRAL.)732 mm dia C-PVC pipe SDR.11 (Supreme/Ashirbad/ASTRAL.)740 mm dia C-PVC pipe SDR.11 (Supreme/Ashirbad/ASTRAL.),
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. 250 mm thick wall)RªSupplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.)RSANITARY FIXTURES.ÊSupplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. (EWC with Wall Hung Cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories and Accessories set, Size: 350x480x395 mm, STrap)W} #CNS-WHT-551SNPP184LZ (Make: Jaquar)Œ
Supplying all materials, labour, T&P and fixing standard sized LONG BODY Bib cock WITH WALL FLANGE of Hindware/ Jaquar/ Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Cat. No.: F330011 HINDWARE>CHdw
ƒ
„
þSupplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge.0=‚JAQUAR-ALD-577 Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer)p
Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange.(HINDWARE Cat. No.: F730041)>IU
 Supplying, installing, testing and commissioning of approved make White Viterous urinals 3.8 LPM supported by CI/MS bracket duly painted, including CP brass waste with dome type grating, CP cast brass bottle trap with extension piece, wall flanges, automatic flushing systems for urinal to ensure flusing only immediately after use, comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells (Sensor), eyes electrically operated solenoid valve, gate valve, black box and necessary wiring in conduit from solenoid value to black box and to mains etc, complete. Including necessary wall cutting/chasing and making good, as required. , jaquar,Size:385x325x635mm,jaquar-URS-WHT-13253NBYÚáSupplying all materials, labour T&P and fixing URINAL FLUSH VALVE FLV-1095NG (Make: Jaquar) of approved make etc complete including cost of all materials complete as per PH specification and direction of Engineering-in-charge/\%
Supply and fixing all materials, labour, T & P and providing granite slab urinal partion wall including cutting grooves in wall and making good the damages, watering, curing, conveyance of all materials to work site etc all complete as per direction of the Engineer-In-Charge.SIZE(1X0.75X0.50)=DEX
XSupplying all materials, labour T&P and fixing HALF Pedestal type wash basins of Hindware/Jaqua

r/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and d

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.