Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹44.4 L
EMD Value
₹44,500
Closing Date
2 Dec 2026, 2:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (Central Tender Cell)
Central Tender Cell, BMC, ICOMC Tower, Unit-9, Satyanagar
Provision of Street Light from Hi-Tech Square to Pandra Village Square in Ward No. 18
2026_ORULB_146811_4
BMC-EE-Tender Cell-96/2026-27 dt. 18.11.2026
Open Tender
Electrical Works
Percentage
60 days
BMC AREA
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹44,500
Yes
Office Chamber of EE(Electrical)
21 Nov 2026
21 Nov 2026
2 Dec 2026
21 Nov 2026
2 Dec 2026
21 Nov 2026
21 Nov 2026 - 25 Nov 2026
25 Nov 2026
120 days
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & installation of 7mtr long hot dip Galvanized swaged type steel tubular pole with MS base plate 300X300X6 mm and having pole dimensions: -
Bottom: -114.3 OD X 5.40mm X 4mtr long,
Middle:88.9 OD X4.85 mm thickness X 1.5mtr long, Top: -76.1 OD X 3.25 mm thickness X 1.5mtr long.
(Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) | 112 | No. | 12,100 | ₹13,55,200 |
| 2 | Supply & fixing of 50mm dia Detachable Single arm (1mtr long) bracket for Tubular Pole. (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) | 112 | No. | 1,700 | ₹1,90,400 |
| 3 | Labour charges towards installation of steel tubular pole including concreting of 3Ft 3 inch below ground level and couping of 2 Ft above ground level of the pole. | 112 | No. | 2,990 | ₹3,34,880 |
| 4 | Supply & Installation of 120 Watt ratings Streetlight with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C) | 112 | No. | 9,367 | ₹10,49,104 |
| 5 | Supply & laying of following Copper unarmoured XLPE cables insulated ISI marked. (Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)
(a) 3cx1.5sqmm | 1,120 | Mtr | 130 | ₹1,45,600 |
| 6 | Supply & laying of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)
(a) 2cx10sqmm | 3,000 | Mtr | 206 | ₹6,18,000 |
| 7 | Supply & laying of 40 mm HDPE pipe for insert of cable laying. | 2,800 | Mtr | 91 | ₹2,54,800 |
| 8 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. | 2,800 | Mtr | 159 | ₹4,45,200 |
| 9 | Supply & installation of 70 A electronic Timer ON/OFF switch for automatic street light control with box (Make-L&T, Crompton, GIC) | 2 | No | 24,583 | ₹49,166 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_622396.xls
BOQ • 0.25 MB
DTCN_96.pdf
Tender Documents • 0.94 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .