Construction of Co Operative Bank Building including internal WS SI development of site Co 5000 liters capacity Rain Water Harvesting Tank Co 100 users septic tank at Luna Pani Distt Mandi HP

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.All kinds of soil including carriage of material in all leads and lifts.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material in all leads and lifts:

1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete 1:2:4 (1cement: 2sand:4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.

Providing weepholes in brick masonry/stone masonry/plain reincorced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawings facae complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads and lifts for

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiralstaircases

Edges of slabs and breaks in floors and walls. Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material in all leads and lifts.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material in all leads and lifts.

Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing plaster drip course/ groove in plastered surface or moulding to R.C.C. projections including carriage of material in all leads and lifts.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material in all leads and lifts. in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material in all leads and lifts. in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts

Stone filling behind retaining walls including carriage of material in all leads and lifts.

Boulder filling dry hand packed tightly as in or under floor including watering, ramming and consolidating complete including carriage of material in all leads and lifts.

Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including carriage of material in all leads and lifts.

Granite of any colour and shade.Area of slab over 0.50 sqm

Providing edge moulding to 20 mm thick marble stone/ Granite counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including carriage of material in all leads and lifts.

Granite work

Providing and fixing expansion hold fasteners on C.C. /R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete including carriage of material in all leads and lifts.

Fastener with threaded dia 12 mm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4mm thickness (weight not less than10.00 kg/ sqm.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 –G with wire of dia 0.56mm for doors, windows and clerestory windows and chamfered edged beading. with PVC/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic item) including carriage of material in all leads and lifts:-

Supplyig and fixing glass panes with putty and nails :- Plain glass 4mm thick including carriage of mateial in all leads and lifts.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment) including carriage of material in all leads and lifts.

Providing and fixing anodized aluminium sliding door bolt as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.

Providing and fixing anodized aluminium tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts.

Providing and fixing anodized aluminium handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts.

Providing and fixing bright finished brass 100mm. Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality), including carriage of material in all leads and lifts

Providing and fixing 100mm bright finished brass rim latch with a dead bolt and pair of knobs with necessary screws etc. complete (Indian make of approved quality), including carriage of material in all leads and lifts

Providing and fixing bright finished hard drawn hooks and eyes 150 mm including carriage of material in all leads & lifts.

Providing and fixing hydraulic door closer/stopper of Everest make and manufacture complete including carriage of material in all leads and lifts.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads & lifts.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of material in all leads and lifts.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including carriage of material in all leads and lifts.

Size 600x600MM

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including carriage of material in all leads and lifts. Size of Tile 600x600 mm

Size 600x600MM

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Digital tiles in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads and lifts.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm including carriage of material in all leads and lifts.

50mm cement concrete flooring 1:2:4 (1cement:2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of material in all leads and lifts.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts. :

Ridges plain (500 - 600mm)

Flashings/ Aprons.( Upto 600 mm)

Barge board (Upto 300 mm)

Gutter (600 mm over all girth)

Providing and fixing Aluminium sheet ceiling with 1mm thick Aluminium sheet in panets of aluminium channels base frame in ceiling with aluminium screws and aluminium beading 40x2mm complete (Aluminium channels base frame to be measured and paid for separately)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of material in all leads and lifts.

Providing and fixing 12 MM thick Prelaminated Particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including carriage of material in all leads and lifts.

Supplying and fixing railing with Toughened glass 12 mm thickness including carriage of material in all leads and lifts

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including carriage of material in all leads and lifts. (i) Single socketed pipes.110 mm diameter

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler 110 mm

Bend 87.5° 110 mm

Shoe (Plain) 110 mm

Painting (two coats) (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning the surface of all dirt, dust, dust and other foreign matter. Enamel paint other than white/white including carriage of material in all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting including carriage of material in all leads & lifts.(a) Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of all dirt,dust and other foreign matter, sand papering and stopping including carriage of material in all leads & lifts.(a) With enamel paint other than white or white paint.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood fille including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other forein matters sand papered smooth to give final matter finish to the surfacae complete including carriage of material in all leads and lifts.

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

CEMENT PLASTER (IN FINE SAND) 20 mm cement plaster of mixincluding carriage of material in all leads and lifts.

Cement mortar 1:6(1 cement: 6 fine sand)

CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of single or half brick wall of mix including carriage of material in all leads and lifts.

Cement mortar 1:3 (1 cement: 3 fine sand)

Cement mortar 1:6 (1 cement: 6 fine sand)

Extra over item No.above for finishing with floating coat of neat cement slury including carriage of material in all leads and lifts.

Add extra over item of cement plaster/concrete/plain R.C.C. work providing and mixing of synthetic fibre 6mm/12mm Recron 3.5 @ 125 gram pack per 50 kg of cement or in ratio as specified by manufacture specification and direction of the Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer on wall and ceilling including carriage of material in all leads and lifts

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including carriage of material in all leads and lifts

Providing and laying stone texture tiles 12.5 mm thick cladding on RCC surface / stone /brick surface as on elevations of masonary walls etc.on 12mm thick cement including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 cement : 3 sand :6graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth including carriage of material in all leads and lifts.

Providing and laying water proofing treatment to verticaland horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st Coat of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry bricks/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Brick edging brick laid on edge to plinth protection with bricks including grouting with cement mortar 1:4(1cement:4sand) with brick size 22.9cmx11.2cmx7 cm. including carriage of material in all leads and lifts.

Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22cm in cement mortar 1:6(1cement:6sand) and inside plastering with cement mortar 1:3(1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1cement:5sand:10graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4(1cement:2sand:4graded stone aggregate of 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads and lifts.

Providing chases 75mm wide and 50mm deep (average size) in walls for G. I./C. I. pipes and filling the same with cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm down gauge after the G. I./C. I. pipe is laid (excluding the cost of G. I./C. I. pipe) including carriage of material in all leads and lifts.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar including carriage of material in all leads and lifts.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of material in all leads and lifts.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres.Of area 3 sq. metres and below including carriage of material in all leads and lifts.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead including carriage of material in all leads and lifts.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting einforcement bars. including carriage of material in all leads and lifts.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge including carriage of material in all leads and lifts.

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved including carriage of material in all leads and lifts.

Providing and fixing to wall ceiling and floor E.E. Lythelene- Aluminium- E.E. Lythelene (PE-AL-PE) com. E.E. site pressure pipes confirming to IS-15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temprature up to 80 degree C, including all special fittings of com. E.E. site material (engineering plastic blend and brass inserts whereever required) e.g. elbows, tees, reducers, couplers and connectors etc; with clamps at 1.0 metre spacing. This includes testing of joints complete as per direction of the Engineer-In- charge, including carriage of material in all leads and lifts.

(a) (16mm OD) Outer dia.

(b) (20mm OD) Outer dia.

Providing and laying in trenches galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification:- 32mm nominal bore.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20 to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G. I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts:-

(i) 1000 liters net capacity.

Proviidng and fixing sand cast/cast iron spun and spigot and socket soil waste and ventilating pioe (lead caualked joints to be measured and paid for separately) including carriage of material in all leads and lifts:- 100mm nominal bore.

Providing and fixing cast iron cowl 100mm nominal size including carriage of material in all leads and lift.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of joints including carriage of material in all leads and lifts. 100mm nominal size.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixting PVC clamp ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixting PVC door bend with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixting PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixting single equal branch with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixting PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixting PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

(i) 110mm dia.

(ii) 75mm dia.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors complete. 110mm x 75mm including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand) (seat and cover to be measured and paid for separately including carriage of material in all leads and lifts:- Anglo Indian (Universal closet), (confirming to BIS specification).

Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10.00 litres capacity (full flush) European standred control low level PVC flushing cistern with fittings with a pair of brackets with fitting such as lead valve, syphon,15mm nominal size PVC ball valve with polythene float, with push button,coulping for connection with inlet and outlet and overflow pipes40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts,

Providing and fixing plastic seat (Solid type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material in all leads and lifts.

Providing and fixing PTMT Jet sprayer of approved quality and colour with 1.50 metre tube including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing stainless steel kitchen sink of approved standard (ISI make) with drain board and C.P. waste including cost of C.I. o r M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings including carriage of material in all leads and lifts:- 610x510mm with bowl depth 200mm.

Providing and fixing mixer for kitchen sink with casted swinging spout at top, including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Flat back 550mmx400mm.

Providing and fixing viterous china pedestal for wash basin complete recess at the back for reception of pipe and fittings, including carriage of material in all leads and lifts confirming to BIS specification.

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with automatic flushing cistern with fittings R S or C.I Brackets standard size galvanised steel flusj pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings , cutting and making good the walls , floors where required:- (a) range of one urinal basin with 5 litres C.I automatic flushing cistern.

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing chromium plated stainless steel grating 100mm confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs wth C.P. brass screws including carriage of material in all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.I. brass screws, including carriage of material in all leads and lifts:-

(i) 750mm x 20mm

Providing and fixing C.P. brass towel ring complete with C.P. brass brackets fixed to wooden plugs with C.I. brass screws, including carriage of material in all leads and lifts.

Providing and fixing soap trays (viterous china), recessed soap tray with hand rail 300mm x 150mm size including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing C.P. brass bib tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P. brass pillar tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P.brass angle valve15mm without nuts & pipe confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing C.P.brass consealed stop cock 15mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-

(a) 15mm nominal size

(b) 20mm nominal size.

(c) 32mm nominal size.

Providing and fixing G.I./M.I. unions of following sizes(where not included in the item) including carriage of material in all leads and lifts confirming to BIS specification:-

(a) 15mm nominal size

(b) 20mm nominal size.

(c) 32mm nominal size.

Providing and fixing PVC connection pipe with brass union 300/450 mm length and 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.

Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:6(1cement:6sand) and water tight C.I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg) square mouth trap 100mmx100mm size 'P' type including carriage of material in all leads and lifts confirming to BIS specification.

Cutting holes through existing brick/stone walls including making good the same in cement mortar 1:6(1cement:6sand) per cm depth of cutting: Holes up to and including 400 mm square centimeter in area including carriage of material in all leads and lifts.

Providing and laying , jointing and testing in trenches centrifugally cast spun ductile iron pipes conforming to BIS 8329-2000 (latest with up to date amendments) in a lenght of 5.50 meters class K7 with cement mortar ning in side duty ISI marked including cost of Tyton (push or joints) fitting including testing of joints and rubber gasket (S&R quality) conforming to IS-92820-1989( Earth work in trenches to be measured and paid for separetely).150mm dia in all leads and lifts:-

(a) 150mm dia in all leads and lifts.

Constructing manhole with RCC top slab in 1:2:4mix(1cement:2sand :4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8(1cement:4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size)finished smooth complete including curing and testing including carriage of material in all leads and lifts:

Inside size 800mmx800mmx 500mm deep including S.F.R.C cover with frame (Medium duty) total weight of frame and cover to be not less then 173 kg weight of frame 103 kg weight of cover 70 kg with 230 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand). including carriage of material in all leads and lifts.

Inside size 800mmx800mmx 1000mm deep including S.F.R.C cover with frame (Medium duty) total weight of frame and cover to be not less then 173 kg weight of frame 103 kg weight of cover 70 kg with 230 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand). including carriage of material in all leads and lifts.

Proviidng 200mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes septic tank with 200mm x 200mm x 100mm cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Supplying and fixing cast iron cover with frame for manhole of 500mm internal diameter C.I. cover (Medium duty) the weight of cover to be not less than 58 kg including carriage of material in all leads and lifts.

Constructing soak pit 2.5 metre diametre 3.00 metre deep with45x45cm dry brick honey comb shaft with bricks of class designation 75 and soil waste drain pipe 100mm diameter 1.80 metre long as per standard design with F.P.S. including carriage of material in all leads and lifts.

Prem Lal, govt. Contractor

M/S NDN Constructions