Loading
Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹5.3 L
Closing Date
18 Aug 2026, 3:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
NORTH
15 conditions · 3 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Any Civil Engineering works (excluding track works/zonal works).
Defination of Similar Work :- C-2: Any Civil Engineering Works (excluding Track works/Zonal works).
17 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email id). In case of a contract award, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser/Executive to the Jurisdictional Assessing Officer mentioned in the Tenderer's bid. (GST).
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. Note: Please read carefully (Provision of Para 14 of GCC) the document required to be uploaded here.
Any other information / Certificates / General Power of Attorney required as per Tender for Partnership Firms, Company:The tenderer whether sole proprietor / a company or a partnership firm / registered society/registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding Article of Association /Board resolution, failing which tender shall be summarily rejected. Note: Please read carefully (Provision of Para 15 of GCC) the document required to be uploaded here.
Tender value is including escalation of (-)15% (Minus Fifteen Percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division)before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
(i) Augmentation of Running Room GNT & NLPD.(ii) Improvements to frieght examination at NLPD.
01-DRM-W-GNT-Tid-02
01-DRM-W-GNT-Tid-02
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹5.3 L
24 Jul 2026
24 Jul 2026
4 Aug 2026
168 items across 4 schedules · ₹3,10,79,895.37 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 747 | 177.5 | 1,32,592.5 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 360 | 196 | 70,560 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 360 | 700.5 | 2,52,180 |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 65 | 2,123.75 | 1,38,043.75 |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 7500 | 17.6 | 1,32,000 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 3 | 7,878.5 | 23,635.5 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 87 | 7,294.7 | 6,34,638.9 |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 106 | 7,178.75 | 7,60,947.5 |
| 9 | Foundations, footings, bases for columns | Sqm | 770 | 392.15 | 3,01,955.5 |
| 10 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 260 | 410.85 | 1,06,821 |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 70 | 18.15 | 1,270.5 |
| 12 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 13 | 8,583.4 | 1,11,584.2 |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 65 | 392.15 | 25,489.75 |
| 14 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 440 | 927.25 | 4,07,990 |
| 15 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 745 | 736.4 | 5,48,618 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 320 | 961.3 | 3,07,616 |
| 17 | Stairs, (excluding landings) except spiral- staircases | Sqm | 25 | 764.95 | 19,123.75 |
| 18 | Under 20 cm wide | Metre | 170 | 208.55 | 35,453.5 |
| 19 | Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) | Sqm | 530 | 384.3 | 2,03,679 |
| 20 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 3 | 10,585.9 | 31,757.7 |
| 21 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | .6 | 20,355.8 | 12,213.48 |
| 22 | 40 mm thick | Sqm | 2.6 | 1,706.55 | 4,437.03 |
| 23 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 45 | 9,504.75 | 4,27,713.75 |
| 24 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 183 | 9,860.4 | 18,04,453.2 |
| 25 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 13 | 733.5 | 9,535.5 |
| 26 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 12 | 905.05 | 10,860.6 |
| 27 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 375 | 1,123.8 | 4,21,425 |
| 28 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 162 | 8,752.55 | 14,17,913.1 |
| 29 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 40 | 7,311.25 | 2,92,450 |
| 30 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 4 | 8,812.05 | 35,248.2 |
| 31 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 49 | 8,198.55 | 4,01,728.95 |
| 32 | Granite stone of any colour and shade | Sqm | 34 | 3,094.55 | 1,05,214.7 |
| 33 | Area of slab over 0.50 sqm | Sqm | 69 | 5,136.3 | 3,54,404.7 |
| 34 | Granite work | Metre | 387 | 510.95 | 1,97,737.65 |
| 35 | Each | 1 | 978.7 | 978.7 | |
| 36 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 142 | 1,267.95 | 1,80,048.9 |
| 37 | Second class teak wood | cum | .6 | 1,42,949.7 | 85,769.82 |
| 38 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 500 | 238.35 | 1,19,175 |
| 39 | 125x65x2.12 mm | Each | 48 | 53 | 2,544 |
| 40 | 100x58x1.90 mm | Each | 40 | 45 | 1,800 |
| 41 | 125x70x4 mm (ordinary type) | Each | 50 | 185.15 | 9,257.5 |
| 42 | 250x10 mm | Each | 24 | 441.6 | 10,598.4 |
| 43 | 150x10 mm | Each | 20 | 287.25 | 5,745 |
| 44 | 300x16x5 mm | Each | 12 | 322.2 | 3,866.4 |
| 45 | 250x16x5 mm | Each | 10 | 308 | 3,080 |
| 46 | 125 mm | Each | 24 | 256.65 | 6,159.6 |
| 47 | 100 mm | Each | 20 | 234.7 | 4,694 |
| 48 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 20 | 121.65 | 2,433 |
| 49 | 30 mm thick pre laminated PVC door shutters | Sqm | 4 | 3,663.8 | 14,655.2 |
| 50 | Second class teak wood | Sqm | 27 | 4,692.1 | 1,26,686.7 |
| 51 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 22 | 10,993.55 | 2,41,858.1 |
| 52 | Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 meter) | Sqm | 6.5 | 8,247.25 | 53,607.13 |
| 53 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in- charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 12 | 2,829.25 | 33,951 |
| 54 | 200 mm | Each | 64 | 186.65 | 11,945.6 |
| 55 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 64 | 272 | 17,408 |
| 56 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | ONE SET | 2 | 885.1 | 1,770.2 |
| 57 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer- in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 20 | 533.25 | 10,665 |
| 58 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 400 | 772.4 | 3,08,960 |
| 59 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 310 | 614.2 | 1,90,402 |
| 60 | Dark shade pigment using ordinary cement | Sqm | 90 | 1,119.5 | 1,00,755 |
| 61 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 4 | 1,096.55 | 4,386.2 |
| 62 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 85 | 1,330 | 1,13,050 |
| 63 | Size of Tile 600x600 mm | Sqm | 200 | 1,553.45 | 3,10,690 |
| 64 | Size of Tile 600 x 600 mm | Sqm | 4 | 1,464.85 | 5,859.4 |
| 65 | Size of Tile 600x600 mm | Sqm | 30 | 1,623.05 | 48,691.5 |
| 66 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 247 | 4,481.3 | 11,06,881.1 |
| 67 | 75 mm diameter | Metre | 100 | 248.8 | 24,880 |
| 68 | 110 mm diameter | Metre | 170 | 377.4 | 64,158 |
| 69 | 75x75x75 mm | Each | 20 | 164.2 | 3,284 |
| 70 | 110x110x110 mm | Each | 20 | 234.15 | 4,683 |
| 71 | 75 mm bend | Each | 20 | 105.9 | 2,118 |
| 72 | 110 mm bend | Each | 20 | 150.35 | 3,007 |
| 73 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 286 | 1,355.8 | 3,87,758.8 |
| 74 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 88 | 738.65 | 65,001.2 |
| 75 | 1:4 (1 cement: 4 fine sand) | Sqm | 440 | 347.05 | 1,52,702 |
| 76 | 1:4 (1 cement: 4 fine sand) | Sqm | 980 | 399.45 | 3,91,461 |
| 77 | 1:6 (1 cement: 6 fine sand) | Sqm | 78 | 383 | 29,874 |
| 78 | 1:4 (1 cement: 4 fine sand) | Sqm | 740 | 471.35 | 3,48,799 |
| 79 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 1016 | 262.7 | 2,66,903.2 |
| 80 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 150 | 116.9 | 17,535 |
| 81 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 2160 | 160.6 | 3,46,896 |
| 82 | Two or more coats on new work | Sqm | 216 | 155.9 | 33,674.4 |
| 83 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | Each | 12 | 271.45 | 3,257.4 |
| 84 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 22 | 2,434.25 | 53,553.5 |
| 85 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 12 | 3,551.25 | 42,615 |
| 86 | In cement mortar | cum | 14 | 2,060.2 | 28,842.8 |
| 87 | For thickness of tiles 10 mm to 25 mm | Sqm | 113 | 73.4 | 8,294.2 |
| 88 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 67 | 266.45 | 17,852.15 |
| 89 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 1210 | 7,993.8 | 96,72,498 |
| 90 | Overhead informatory road signage | Sqm | 6 | 5,879.9 | 35,279.4 |
| 91 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 170 | 972 | 1,65,240 |
| 92 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer- in-Charge. | cum | 453 | 2,914.3 | 13,20,177.9 |
| 93 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 1 | 6,515.55 | 6,515.55 |
| 94 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 7 | 8,006.6 | 56,046.2 |
| 95 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 8 | 2,648.85 | 21,190.8 |
| 96 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 1 | 2,226.35 | 2,226.35 |
| 97 | 510x1040 mm bowl depth 250 mm | Each | 1 | 6,945.6 | 6,945.6 |
| 98 | 610x510 mm bowl depth 200 mm | Each | 1 | 4,940.8 | 4,940.8 |
| 99 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 8 | 6,940.75 | 55,526 |
| 100 | 32 mm dia | Each | 10 | 103.9 | 1,039 |
| 101 | 40 mm dia | Each | 1 | 119.55 | 119.55 |
| 102 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 10 | 53.25 | 532.5 |
| 103 | Rectangular shape 453x357 mm | Each | 21 | 1,361.8 | 28,597.8 |
| 104 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 5 | 1,151.9 | 5,759.5 |
| 105 | Sand cast iron S&S as per IS: 3989 | Each | 8 | 1,996.5 | 15,972 |
| 106 | 25 mm nominal dia Pipes | Metre | 100 | 401.55 | 40,155 |
| 107 | 32 mm nominal dia Pipes | Metre | 50 | 518.75 | 25,937.5 |
| 108 | 50 mm nominal dia Pipes | Metre | 50 | 934.15 | 46,707.5 |
| 109 | 20 mm nominal dia Pipes | Metre | 100 | 537.6 | 53,760 |
| 110 | 25 mm nominal dia Pipes | Metre | 50 | 627.25 | 31,362.5 |
| 111 | 50 mm dia nominal bore | Metre | 100 | 762.15 | 76,215 |
| 112 | 50 to 80 mm nominal bore | Each | 10 | 1,785.35 | 17,853.5 |
| 113 | 15 mm nominal bore | Each | 16 | 353.25 | 5,652 |
| 114 | 15 mm nominal bore | Each | 16 | 353.25 | 5,652 |
| 115 | 15 mm nominal bore | Each | 2 | 97.75 | 195.5 |
| 116 | 100 mm diameter | Each | 8 | 193.95 | 1,551.6 |
| 117 | 150 mm diameter | Each | 8 | 222.35 | 1,778.8 |
| 118 | 15mm nominal bore | Each | 1 | 574.3 | 574.3 |
| 119 | 80 mm dia nominal bore | Each | 2 | 3,627.65 | 7,255.3 |
| 120 | 150 mm diameter S.W. pipe | Metre | 30 | 1,179.85 | 35,395.5 |
| 121 | Rectangular shape 600x450 mm internal dimensions | Each | 10 | 1,437.65 | 14,376.5 |
| 122 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 100 | 530.9 | 53,090 |
| 123 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 15 | 634.45 | 9,516.75 |
| 124 | Pre-laminated particle board with decorative lamination on both sides | Sqm | 12 | 1,115.4 | 13,384.8 |
| 125 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 10 | 1,176.8 | 11,768 |
| 126 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). | Kg | 180 | 817.15 | 1,47,087 |
| 127 | 300 mm dia | Metre | 90 | 707.75 | 63,697.5 |
| 128 | 150 mm nominal size dia | Metre | 30 | 793.25 | 23,797.5 |
| 129 | Frame size 45 x 85 mm | Metre | 50 | 926.35 | 46,317.5 |
| 130 | Frame size 65 x 100 mm | Metre | 16 | 1,111.3 | 17,780.8 |
| 131 | Frame size 65 x 125 mm | Metre | 65 | 1,381.6 | 89,804 |
| 132 | 30 mm thick | Sqm | 44.1 | 4,764.2 | 2,10,101.22 |
| Schedule total | ₹2,76,26,189.53 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionsofbuildingworks.pdf
ATTACHMENT
SystemImprovementsformaintainingSiteRecords-CE-Works-1.pdf
ATTACHMENT
onsitelab.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026.pdf
ATTACHMENT
LabTesting.pdf
ATTACHMENT
onsitelab_1.pdf
ATTACHMENT
weldingprofile.pdf
ATTACHMENT
01-02-MasterDocument01WorksGCC2022withACS11.pdf
ATTACHMENT
02MasterDocument02worksGCC2022withACS11-Final.pdf
ATTACHMENT
GCC_April-2022_2022ACS1to11-Merged-compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].