Construction of Bore room (including panel Board) at District jail mehsana, Dist.Mehsana (Priority year-2023-24) 5th Attempt) (SBD)

No. In Words InFigure

Excavation for foundation upto 1.5 Mt. depth including sorting out and Rs. One Hundred Fifteen &

1 stacking of useful materials and disposing of the excavated stuff for all 3.00 Cum. Paise Ninety Seven Only 115.97

lead and lift. [[A]Loose or soft Soil

Excavation for foundation up to 1.5 Mt. Depth including sorting out and Rs. One Hundred Forty Eight

2 stacking of useful material and disposing of the excavated stuff up to any 6.00 Cum. & Paise Eleven Only 148.11

Lead. [[B]Dence or Hard

Excavation for foundation up to 1.5 Mt. Depth including sorting out and Rs. Two Hundred Fifty Two

3 stacking of useful material and disposing of the excavated stuff up to any 3.00 Cum. & Paise Ninety Only 252.90

Lead. [[B]Hard Murram

Providing & laying CEMENT CONCRETE 1:3:6 ( 1cement : 3 coarse Rs. Two Thousand Eight

sand : Hundred Fifty Six & Paise

6 broken stone aggregate 40 mm nominal size) and curing complete in Twenty Seven Only

Foundation & Plinth

5 Providing and laying ordinary C.C. 1:2:4 (1 cement :2 coarse sand : 4 2.00 Cum. Rs. Three Thousand Four 3455.59

Machine crushed black stone aggregate of 20mm nominal size ) and Hundred Fifty Five & Paise

curing complete. Including the cost of form work if necessary but Fifty Nine Only

excluding cost of reinforcement for R.C.C. work in foundation and plinth.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Providing and laying controlled cement concrete M-200 and finishing Rs. Five Thousand Six

smooth with curing complete including cost of formwork including Hundred Eighty Eight &

finishing smooth with curing etc. complete including the cost of formwork Paise Fifty Two Only

6 of Plywood only with fair finish & Proping must be of steel only So as to 0.70 Cum 5688.52

give a fair finish but excluding the cost of reinforcement for R.C.C.

COPING. Rates are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix design.

BRICK WORK using common burnt clay building bricks having crushing Rs. Three Thousand Two

strength not less than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in Hundred Thirty Six & Paise

cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Conventional Bricks ) Forty Five Only

Rs. Two Hundred Fifty Six

8 etc.in layers not exceeding 20cms.In depth consolidating each deposited 8.00 Cum. 256.00

layer by ramming and watering.

Supplying and Filling in plinth with sand under floors including watering, Rs. Three Hundred Seventy

ramming, consolidation and dressing etc.complete Eight & Paise Twenty

Three Only

Applying general insecticide pest control treatment to floors, cupboards Rs. Seventy Six & Paise

etc. including labour, material ETC. complete.USING lmidacloprid Two Only

30.5.5 Scas PER IS 6313 PART II(0.075% concentration by mass)is

10 recommended 10.5ml chemical diluted with 5 liters of water aplication o.5 15.00 Sqm 76.02

litre chemical/sqm of surface is recommended as per I.S

Providing and laying controlled cement concrete M-200 for R.C.C. Lintel Rs. Eight Thousand Two

work including finishing smooth with curing etc.complete including cost Hundred Thirty Nine & Paise

of formwork and excluding the cost of reinforcement for Ground Forty Nine Only

11 Floor.Rates are inclusive of providing and mixing plastisizer of approved 1.00 Cum. 8239.49

make in proportion as prescribed by manufactures.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Providing and laying controlled cement concrete M-200 and finishing Rs. Eight Thousand Five

smooth with curing etc.complete including cost of formwork and Hundred Fifteen & Paise

excluding the cost of reinforcement for BEAMS having any cross Fifty Five Only

12 sectional area at Ground Floor. Rates are inclusive of providing and 0.30 Cum 8515.55

mixing plastisizer of approved make in

proportion as prescribed by manufactures.

Providing and laying controlled cement concrete M-200 including Rs. Five Thousand Six

finishing smooth with curing etc.complete including cost of formwork Hundred Eighty Eight &

and excluding the cost of reinforcement for Lintel bend/sill bend at Paise Fifty Two Only

13 Ground Floor.Rate are including of Providing & Mixing Plasticizar of 0.20 Cum 5688.52

approval make in propration as

precribed by the manufacture.

Providing and laying controlled cement concrete M-200 and finishing

smooth with curing etc.complete including cost of formwork and

excluding the cost of reinforcement for R.C.C.work in slab having Rs. Eight Thousand Eight

14 thickness of 10cm. and up to 13cm. for Ground Floor. Rates are inclusive 2.00 Cum 8008.75

& Paise Seventy Five Only

of providing and mixing plastisizer of approved make in proportion as

prescribed by manufactures.

Providing and laying controlled cement concrete M-200 for R.C.C. Rs. Nine Thousand One

CHAJJAS not exceeding 10cm.thickness including finishing the exposed Hundred Thirty & Paise

surfaces with cement mortar 1:3 (1-cement;3-fine sand) to give a smooth Forty Seven Only

15 & even surface including centering formwork & curing etc. complete 0.20 Cum 9130.47

excluding cost of reinforcement for all floors. Rates are inclusive of

providing and mixing plastisizer of approved make in proportion as

prescribed by manufactures.

16 Brick work using common burnt clay building bricks having crushing 9.00 Cum Rs. Three Thousand Five 3502.04

strength not less than 35 Kg/Sq.cm.in superstructure above plinth up to Hundred Two & Paise Four

floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Only

fine sand) for Ground

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

17 Half brick masonry in common burnt clay building bricks having crushing 3.00 Sqm Rs. Five Hundred Fifty Six 556.67

strength not less than 35 Kg/Sq.cm.in cement mortar 1:4(1-cement;4- & Paise Sixty Seven Only

coarse sand) for Ground Floor

18 Providing 10 mm thick cement PLASTER in single coat on ceilings for 12.00 Sqm Rs. Two Hundred Three & 203.02

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 Paise Two Only

sand ) including finishing with a floating coat of neat cement slurry at

19 Provinding 15 mm thick cement PLASTER in single coat on brick or 50.00 Sqm Rs. Two Hundred Three & 203.54

concrete wall for interior plastering and finished even and smooth in C.M. Paise Fifty Four Only

1:4 ( 1 cement

: 4 sand ) including finishing with floating coat of neat cement slurry at

GROUND FLOOR.

20 Providing 20mm thick sand faced cement plaster on walls above ground 55.00 Sqm Rs. Three Hundred Two & 302.78

level consisting 12mm thick backing coat of C.M.1:3 (1-cement;3-sand) Paise Seventy Eight Only

and 8mm thick finishing coat of C.M.1:1(1-cement;1-sand) etc.complete

for any height.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Providing and laying integrated cement based proprietary water proofing

treatment of required thickness over the roof including providing and

applying two coat of Acrylic polymer of approved brand & manufactures

and china mosaic fitting and finally finishing the surface with white

cement slurry and sloping out terrace slabs with following specification

laid to required slope not flotter than 1 : 80 (incl treating the vertical

surface of the perapet wall upto 20cms height above finished level of

terracing including finishing, curing, testing etc. comp. Rate is incl. Ten

years performance of guarantee bond to be given on stamp paper. (No

extra shall be paid for increase in thickness for proper slope). (a)

Applying two coats of Acrylic based polymer of approved brand & Rs. Five Hundred Eighty &

manufacture as per recomodation of manufacturer over the R.C.C. Slab Paise Eighty Seven Only

incl. clearing the surface before treatment. (b) Finishing the surface with

China Mosaic pieces laid on 10mm thick joint less cement mortar of mix

1:3 (1 cement : 3 coarse sand) admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with

trowel with neat cement slurry.(c) The whole terrace so finished shall be

flooded with water for a minimum period of two weeks for curing for final

test.All above operations to be done in order and as directed and specified

by the engineer - in - charge.

Providing and Laying Mirror Polished (Dimond Polished) Polished Kota

Stone Flooring over 20mm thick base of cement mortar 1 : 6 (1-Cement :

6-Coarse Sand) laid over and jointed with grey cement slurry including

Rubbing and Polishing etc. Complete. (A) 25mm Thick. In Green Colour. Rs. One Thousand Fifty Nine

Rate Are Inclusive of Single Piece & Making 3 Line Groove & Moulding & Paise Ninety Only

Of Outer edge as

Directed By Engineer In Charge

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Providing and Laying Double Pre Polished (Dimond Polished) 25mm Rs. One Thousand One

Thick Polished Kota Stone in Skirtings over 10mm thick base of cement Hundred Ninety Nine &

23 mortar 1 : 3 (1-Cement :3-Coarse Sand) laid over and jointed with grey 2.00 Sqm Paise Forty Only 1199.40

cement slurry including Rubbing and Polishing etc. Complete for ALL

Granite stone slab 15mm to 18mm thick in Sill and jambs laid on 10 mm Rs. Two Thousand Four

thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with high Hundred Twenty Eight

24 polymer modified quick set adhesive (water based) including rubbing and 5.00 Sqm Only 2428.00

polishing etc. complete. Telephonic black granite or as specified in tender

Providing and fixing Alluminium section window having extruded

Aluminum Colour anodized section frame main outer size 95mm x 24mm

x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal

Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Rs. One Thousand Five

25 Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 1.90 Sqm Hundred Twenty Eight & 1528.27

18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 Paise Twenty Seven Only

mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details including one mosquitoe jali shutter With Both Side

Locking Arrangment.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush

Door Shutter with 1mm Thick Laminates on Both Side of

Shutter.(Laminates shall be Century, Signature or Royal Touch Brand

only) Making / Construction of Flush Door is with Pine or southern

Yellow Pine Filler and 2.5mm core thick veneer Both Side and 0.4mm

Face Veneer on Both Side with Lock rail on Center.

Flush Door Provide with Teak wood beading patti (32mm X 12mm) on

Peripheries of Flush Door with Matching Laminate Paint with Door Frame

of 90mm x 45mm Finger jointed solid maranti wood including paint

matching with Laminates, Door frame having 25 years warranty against

biological agent like Termite, Borers, Decay, Fungi and harmful insects

also warranty with Chemically Treated and Seasoned Including Paint

Matching with Laminates. Frame & Flush door shutter having 5 year Rs. Eight Thousand Three

26 warranty against attack of biological agent like termite, borers, decay, 2.50 Sqm Hundred Ninety Nine & 8399.74

fungi and harmful insects also warranty against seasoning related issues Paise Seventy Four Only

like crack, bending, twisting, warping. Laminates on shutter shall be press

by cold press method door frame and shuters br brought to site in Packed

PVC Bags & PVC Bag shall be Removed on completion of work in such a

way that shutter & Frame is free. Shutter shall be brought to site in packed

PVC bags & pvc coating shall be removed on completion of work in such

a way that shutter & Frame is free from nail mark & any damages etc.

Rates are also Inclusive of 15cm Long 6 No's of Hold Fast per frame

including using 4 Inch S.S. butt Hings, S.S Screws and Providing &

Fixing following S.S Fixtures And Fastening.

(1) Aldrops 2 Nos, 250mm x 16mm (For External Door)

(2) Aldrops 1 Nos, 250mm x 16mm (For Internal Door)

(3) Towel bolt 1 Nos, 200mm x 10mm (For All Door)

(4) Tadi 1 Nos, 200mm x 16mm (For External Door)

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Providing, Fabricating and fixing M.S. GRILL/GATE of approved pattern

fabricated from M.S. flat,square bars, round bars,c-channel, box pipe as

per detail Drawings. Rate is inclusive of welding with grinding smooth

surface, two coats of Oil paint and one coat of yellow Zinc primer coat of

approved brand only. Oil paint shall be Luxol Enamel paint of Berger Rs. Seventy Two & Paise

27 Paint india limited. or asian paint apcolite premium gloss Enamel of asian 30.00 Kg 72.63

Sixty Three Only

paint or Dulux premium gloss enamel of dulux paint only. M.S Grill Gate

material should be used ISI

marked only.

Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on Ceiling

/ Slope Surfaces (Two Coats) to give an Required shape and even shade

after thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials and finishing smooth etc. complete. Rate are

inclussive of Applying Two Coats of Lappy (Putty) and One Coat of

Primer on New Wall Surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth. (Fine Putty Shall be of Bison Wall Putty of Rs. One Hundred Eighty Six

28 Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux 35.00 Sqm 186.26

& Paise Twenty Six Only

Polly Putty of Dulux Paint Only and Primer shall be of BP White Primer

of Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian

Paint or Interior Sealer A 500 of Dulux Paint Only and Plastic Emulsion

Paint Shall be of Rangoli Total Care of Berger Paint India Ltd or Apcolite

Premium Emulsion of Asian Paint or Dulux Interior A 900 of Dulux

Paint Only.) etc. Complete for ALL FLOORS.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Finishing Walls with Plastic Emulsion Paint on Wall Surfaces (Twocoats)

to give an Required shape and even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials and

finishing smooth etc. complete. Rate are inclussive of Applying Two

Coats of Lappy (Putty) and One Coat of Primer on New Wall Surfaces to

give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth. (Fine

Putty Shall be of Bison Wall Putty of Berger Paint India Ltd or Trucare

Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint Only and Rs. One Hundred Seventy

Primer shall be of BP White Primer of Berger Paint India Ltd or Asian Six & Paise Thirteen Only

Paint Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of

Dulux Paint Only and Plastic Emulsion Paint Shall be of Rangoli Total

Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian

Paint or Dulux Interior A 900 of Dulux Paint Only.) etc. Complete for

ALL FLOORS.

Finishing walls with Weather Proof Exterior Emulsion Paint on Wall

Surfaces (Two Coats) over and above Applying one coat of Primer to give

an Required shape and even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials and finishing

smooth etc. complete. (Primer Shall be of Weather Coat Exterior Primer

of Berger Paint India Ltd or Asian Paint Trucare Exterior Primer of Asian Rs. One Hundred Three &

Paint or Exterior Sealer E 900 of Dulux Paint Only and Exterior Emulsion Paise Eighty Two Only

Paint shall be Weather Coat Smooth of Berger Paint India Ltd. or Apex

Weather Proof Emulsion of Asian Paint or Dulux Weather Shield Projects

of Dulux Paint Only.)

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592

of 90mm Dia Complete with Special flings, Compressor type Fittings,

Pipe fixing with Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp

with washer for Vertical Rain water pipe, Including making good the Rs. Three Hundred Two &

31 ceiling and floor on terrace rain water pipe shall be 90 mm Dia. SWR 9.00 Rmt 302.54

Paise Fifty Four Only

horizontal pipe and vertical pipe and 90mm bend at the end near by

Ground level rate are Inclusive of all Necessary Fittings required.

Providing I.S.I. mark 7 levers three keys brass pad lock of Navtal (Godrej) Rs. Two Hundred Forty

32 make 75mm dia on completion Project.. 1.00 No Three & Paise Sixty Four 243.64

33 Providing TMT Bars Fe-500/500D reinforcement of any other approved 460.00 Kg Rs. Seventy Five & Paise 75.46

brand of GSPHC ONLY. For RCC work including cutting,bending, and Forty Six Only

placing in position etc. complete for all floors.

Total Sch B-1 Civil cost Rs.

34A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 5.00 Point Rupees Four Hundred 426.00

1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) Twenty Six Only

copper PVC insulated FRLS wire for earth continuity in FIA approved ISI

mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected on/in Wall / slab

along with continuous G.I. fish wire to draw wires and laid in approved

manner zari for PVC pipe and boxes shall be filled with cement mortar

and finishing the surface to match the wall / ceiling complete with

approved make 5/6 Amp. ISI make modular type switch and accessories

mounted in 20 G. G.I. company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD Connector as

directed for concealed wiring.(Deep Junction box 75mm depth if

required)(Make & Model approved by EIC and matching colour with

switch and accessories) Light point. Cat.-II.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Necessary sheet / tape / polythene / sand must be erected or filled in all

box to prevent mortar going into the box. Length of point wiring must not

increase than 10 mtr. For that necessary switch boards and their locations

must be finalised before execution by agency otherwise payment will not

be done for extra long point. (For future extention, if required, agency has

to erect one higher size metal box and modular plate as per instruction of

EIC. Cost of blank plate shall be paid as per tender item) [This item

include cleaning (inside/outside) of all G.I. switch boards, electric point

box, fan box, MCBDB & box cutting plaster finishing for modular plate

without any gap] (Conductor resistance should be as per IS:8130/1984)

34B For Fan Point (with 6 A. Modular type switch and two module hum free 1.00 Point Rupees Six Hundred Four 604.00

EME Five step type Electronic fan regulator both having ISI mark) Cat.- Only

34C For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket both 2.00 Point Rupees Two Hundred 219.00

having ISI mark) Cat.-II. Nineteen Only

35 Providing and erecting Medium Class FIA approved and ISI mark white 50.00 Mtr. Rupees Twenty Three Only 23.00

colour (embossed) RIGID PVC PIPES of following size complete

erected with necessary PVC fittings & Junction boxes fixed with adhesive

solution & clamps on / in wall / ceiling along with continuous fish wire to

draw mains with necessary fittings and junction boxes for following dia.

(a) 20 mm. dia.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

36 Providing and laying Mains with FRLS PVC Insulated wire ISI marked 50.00 Mtr. Rupees Fifty Nine Only 59.00

1.1 KV grade with FIA approved ISI mark medium class 20/25/32 mm

dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution to be erected on/in brick wall / slab along with continuous G. I.

fish wire to draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall / ceiling complete

with FRLS PVC insulated wire for earth continuity. (Approved ISI make

only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains

with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as

per standard colour code. (Conductor resistance should be as per

37 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible 10.00 Mtr. Rupees Thirty and Paisa 30.95

pipe with necessary socket, PVC bushes saddle, Check-nuts etc. complete Ninety Five Only

of following sizes.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

38 Providing & Erecting 2.0 mtr long Earthing system by making minimum 2.00 Each Rupees Seven Thousand 7025.00

bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe Twenty Five Only

technology earthing.Earthing electric rod must be made from Corrosion

free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class

ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B

Class ISI mark reputed Brand Terminal Size: 70mm X 100mm length,

Terminal Should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised thickness must

be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material

minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X

400 mm X 400 mm depth and Cover should be heavy duty cast iron with

required size of 300 mm X 300 mm X 4 mm thick.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification

only] [OEM has to submit all detail & sample for approved before

supplying]

[Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing upto

02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

39 For above earthing additional charges for boring in hard rock soil (by 2.00 Each Rupees Two Hundred 276.00

breaker) & filling soft soil in earth pit (certificate for soil have to given by Seventy Six Only

DEE / AE along with photographs)

40 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with 251.98 Sq. Rupees Five and Paisa 5.81

red oxide be concealed in wall with necessary plastering & finishing with Inch Eighty One Only

3 mm thick laminated sheet with grooving as directed of following depth

41 Providing & Erecting 3 mm thick Polycarbonate (PC) sheet with 500.00 Sq. Rupees Three Only 3.00

grooving as directed Inch

42 Providing & Erecting 3 mm thick acrylic Sheet with grooving as directed 500.00 Sq. Rupees Three Only 3.00

43 Supplying & erecting Sintex or approved make SMC press moulded 1.00 Each Rupees Five Hundred Ten 510.00

composite FRP. loop-in, loop-out approx. 2mm thick box complete with Only

bakelite connector strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following size of

box.(b) 250 mm x 200 mm x 100 mm [deep]

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

44 Supplying and fixing radium sticker or Painting the number and words 97.00 Each Rupees Two Only 2.00

for inventory Identification on erected fittings / equipment’s or Such

accessories (MCBDB, Panel, Pole, Rack, Earthing, Pump, Door etc.) as

may required with good quality of enamelled paint or fade proof, weather

proof, waterproof high quality vinyl radium sticker for indoor / outdoor

application as directed by engineer in charge. For one character 50 mm

(The colour of sticker / paint should be as per instruction given by EIC as

per site requirement)

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

45 Supplying and Erecting LED indoor fitting of approximately 4 feet long 2.00 Each Rupees Three Hundred 370.00

with LED of wattage 0.2W to 0.5W assemble on single MCPCB with Seventy Only

housing use as a heat sink shall be made from Aluminum extrusion having

enough strength (sample must be approved by EIC) with polycarbonate

diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing clamp design & strength should be sufficient to hold the fitting

erected on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 5 yrs free replacement Guarantee for complete Fixture)

[Approval will

46 Supplying and be given 8strictly

erecting W LED subject

lampsto item

with specification]

following wattage capacity 1.00 Each Rupees One Hundred 111.00

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built- Eleven Only

surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable Lamp holder.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

47 Providing and erecting Polycarbonate body surface mounting LED Bulk 1.00 Each Rupees Seven Hundred 780.00

head type 9 watt Lighting Fitting with electronic driver having THD < Eighty Only

15%, CRI>80, P.F.0.95 And lumen output from luminaire 720 lm, input

voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt

driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

48 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 1.00 Each Rupees One Thousand Nine 1929.00

AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as Hundred Twenty Nine Only

per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3)

Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM:

minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation:

'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total

Body: Top & Bottom should be alluminium, (10) Blade: Aluminium

approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12)

Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15%

Tolerance )as per is 1709-1984, Aluminium body premium quality,

Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15)

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site

requirment, (17) No vibration and noise due to mechanical parts. (Agency

has to erect safey wire with ceiling fan and checked with EIC) (OEM has

to approved model as per tender specification and tested at ERDA)

(Necessary test reports should be submitted strictly at the time of approval.

Sample approved by EIC subject to above specification only)

49 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to 1.00 Each Rupees One Hundred Twenty 125.00

the RCC bars up to 50 mm Length each side & piereced through 18 Gauge Five Only

G.I Box having 125 mm dia depth of 75 mm complete erected concealed

in ceiling with necessary modular plate / sheet.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

50 Providing & erecting weather proof, dust & vermin proof, floor mounted 1.50 Sq. Rupees Sixteen Thousand 16230.00

front operated indoor type cubical panel board having IP-42 & above Mtr. Two Hundred Thirty Only

protection as per approval from engineer incharge and made from 2 mm.

thick CRC M.S. sheet for outer body & doors, 1.6 mm. thick CRC M.S.

sheet for internal partitions with necessary supporting angles, flats

including skirting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-In-

Charge with erection of supplied switchgears, busbars with suitable size of

interconnecting PVC copper wire / Copper-Aluminium strips, rubber

gromets, rib, control wires, backelite control fuses, measuring instruments,

earth bus & earth bolts, foundation flange-bolts-base plates, sufficient nos.

of hinged doors, handle with locking arrangement, rubber gasket complete

with Required Nos. heavy Duty Connector with Cadmium plated nut and

bolt for Anti rusting

The panel shall be supplied with Seven Tank chemical process which shall

be carried out before applying painting, painted with powder coating. (The

rates excludes the cost of switchgears, busbars, interconnecting mains &

Copper / Aluminium strip, fuse, meters etc. The dimension shall be

measured excluding base beams) The standard companies switch gear

shall be used and only manufacturers at CPRI approved factory as per IEC

61439 and shall be certified by that company whose switch gears are used

after fabrication for beneficial use. With 350 mm depth

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Panel manufacturer have to give 3 years maintenance and service support

if in case of breakdown or fault. Panel manufacturer have to submit

electrical meter calibration report. Agency should design the panel in such

a way that there should not be any excess in panel area (sq.mtr) & length

of bus-bar (mtr), if any excess occurs draw attention to GSPHCL at the

time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill

work force under supervision of electrical engineer and guidelines given

by manufacturer to avoid damage to the item. Picture of it to be submitted

in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's

engineer before giving order. If found any problem in size discuss with

GSPHCL engineer for rectification before giving order. [Including

Necessary numbering / marking on PANEL done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement] (All Panel as per

IEC 61439 as per NBC Guideline) [Manufacturer must be of Gujarat

state so three stage inspection can be done]

51 Providing & erecting Approved make Three pole moulded case circuit 1.00 Each Rupees Fifteen Thousand 15421.00

breaker having breaking capacity ICU of 35 KA. at 415 V. having Four Hundred Twenty One

Normal current rating 200 A. with variable/Fixed Thermal & magnetic Only

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S.housing. ICS=100% ICU Only

52 Providing and erecting Approved make Four pole moulded case circuit 1.00 Each Rupees Seven Thousand 7976.00

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal Nine Hundred Seventy Six

current rating 125A with variable/Fixed thermal & magnetic release Only

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

53 Providing and erecting Approved make Four pole moulded case circuit 1.00 Each Rupees Six Thousand One 6112.00

breaker having breaking capacity ICU of 25 K.A. at 415 V, having Hundred Twelve Only

normal current rating up to 25 A to 100 A. with variable/Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only

54 Supplying & Erecting Approved Make Neutral link for (ii) 200 / 250 / 1.00 Each Rupees Two Hundred 272.00

320 / 400 / 630 / 800 Amps Amps as per site requirement and instruction Seventy Two Only

55 Supplying & Erecting Approved Make Extended operating rotary 3.00 Each Rupees Eight Hundred Sixty 865.00

handle with pad lock with three position Trip, Off, On suitable for 25 Five Only

Amp. to 250 Amp. panel mounting.(Company Must be same company

of switchgear)

56 Supplying and erecting tripple pole & neutral 440V / 500 V Panel 2.00 Rn.Mtr Rupees Three Thousand One 3171.00

mounting Copper Busbars with four equal Nos. of electrolyte bus having Hundred Seventy One Only

current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wraped with colour insulating tape for phase sequence

of following current carrying capacity, erected with necessary bus bar

supports / insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections.For electrolyte copper

busbars.Suitable for 200 Amp. capacity

57 Supplying and erecting KITKAT pattern porcelain cutout with base of 3.00 Each Rupees Four Hundred 416.00

following current capacity erected on existing block board. [vi] 200 A. Sixteen Only

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

58 Supplying and erecting Approved make Earth fault Relay suitable to 1.00 Each Rupees Four Thousand Nine 4934.00

mount with inter connection to moulded case circuit breaker having CT Hundred Thirty Four Only

ratio & MCCB rating as following along with shunt trip 220 V AC with all

internal connections & complete erected in existing M.S.housing. (2)

A - 200 A, CT Ratio 1/200 [make and model approved by EIC strictly as

per tender specification]

59 Supplying and erecting approved make panel mounting type Digital 1.00 Each Rupees One Thousand Two 1263.00

Voltmeter having 3 x 1/2 digits LED display, 0 to 750 AC Volts range Hundred Sixty Three Only

having 0.5 class accuracy erected on existing panel board with all

connection, wiring etc. with manufacturers calibration certificate. [make

and model approved by EIC strictly as per tender specification]

60 Supplying and erecting approved make panel mounting type Digital 1.00 Each Rupees One Thousand Five 1543.00

Ammeter having 3 digits LED display, external CT operated, calibrated Hundred Fourty Three Only

for 0 to 1000 Amps. suitable to operate on 500 Volt AC, having 0.5 class

accuracy erected on existing panel board with all connection, wiring etc.

with manufacturers calibration certificate. [make and model approved by

EIC strictly as per tender specification]

AC Supply 500 V on existing panel board with necessary connections. Fourteen Only

[make and model approved by EIC strictly as per tender specification]

62 Supplying and erecting approved make suitable panel indicator LED type 3.00 Each Rupees Fourty Three Only 43.00

lamp, lens cover, complete erected with necessary connections.

63 Providing and Erecting of Miniature circuit breaker single pole 6 4.00 Each Rupees One Hundred 111.00

Amp. to 25 Amp. suitable to operate on 240 V A.C. system and having Eleven Only

breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. Cat-III.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

64 Providing & erecting L.T. Current Transformer with bar primary 50/5 4.00 Each Rupees Two Hundred 272.00

to 1000/5 ratio 15 VA burden having 0.5 class accuracy erected in existing Seventy Two Only

CRCA box duly secured with insulating materials connected to the meter

[make and model approved by EIC strictly as per tender specification]

65 Providing and erecting busbar chamber confirming to IS-375 fabricated 1.00 Rn.Mtr Rupees Five Thousand Six 5675.00

from 16 GMS sheet dust & vermin proof having hinged door with rubber Hundred Seventy Five Only

gasket and necessary busbar supports with copper busbar having current

density not more than 1.6 amp/sqmm (Rated current per Cross Section

area) duly wired with colour insulating tape for phase sequence, three

phase & neutral Each equal & one meter long suitable for following

current capacity with necessary painting mounted on wall or pedestal

frame of required size with necessary incoming and outgoing connections

with proper size of copper strip/wire with lugs as directed. Suitable for

200 Amp. capacity [make and model approved by EIC strictly as per

tender specification]

66 Providing & erecting 240 V MCB Double pole switch for Motor & 4.00 Each Rupees Three Hundred 327.00

Inductive load (C curve) having 10 KA breaking capacity & confirms to Twenty Seven Only

IS:8828 in Existing M.S. box having following capacity. For 40 Amp.

67 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 2.00 Each Rupees Seven Hundred 730.00

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Thirty Only

in existing box having following capacity [c] 63 Amp.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

68 Providing ad erecting approved make single phase Double Door metal 1.00 Each Rupees Three Thousand Six 3657.00

clad D.B. as per relevant indian standards ammended upto date. Supplying Hundred Fifty Seven Only

and fixing following way single phase MCB distrubution board of

company fabricated IK 09 certificate with sheet box with powder coated

inside and outside after apply seven tank chemical process of MS sheet

cover complete with suitable integral single piece construction tinned

copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. Manufacturer must be

provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D

type PU gasket. (2) Seventank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting

Cover. For 240 Volts on surface / recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, with suitable

size FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned copper neutral

link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc. Single phase

incoming and horizontal single phase outgoing.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

For 4 Way MCBDB : Including 40 Amp. 30 mA double pole ELCB

(ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C

curve confirms to IS:8828 having breaking capacity of 10 KA) and

S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp to 32 amp.:- 2 Nos.) (The DBs should be used

of same company of MCB / ELCB to be used) (MCBDB must be erected

in line & level with spirit level and finish the external edge with box

cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with

red colour radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per requirement]

69 Supplying & erecting 12 mm thick backelite sheet of approved make and 1.00 Sq. Rupees Two Thousand Two 2289.00

grade on existing 25 x 25 x 3 mm red oxide painted angle iron frame Mtr. Hundred Eighty Nine Only

suitable for fixing ICDP SWITCH and energy meter (contractor shall

make approved drawing of Bakelite sheet To arrange required No. of

Energy meter & ICDP/MCB switch-busbar etc. as per Actual space

available in electrical room at site)

70 Providing, erecting, Fabricating the M.S. structure as per requirement 50.00 Kg. Rupees Seventy Seven Only 77.00

of site as per structure design Including proper size approved by EIC of

M.S. angles, flats, bars, square pipe, channels, sections (Tata, Jindal,

Asian, JSI Make) complete with cutting, welding, grinding and finishing

duly painted with Asian/Nerolac make premium quality oil paint and true

care red oxide metal primer,asian paint make with erection on site as per

direction of engineer in charge with necessary grouting cementing,

plastering and finishing complete. All hole opening of square pipe end

must be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

71 Providing and erecting metalic danger notice board for MEDIUM 1.00 Each Rupees Sixty Nine Only 69.00

VOLTAGE installation to be erected as per I.S.

72 Supplying and laying UPVC cable trunking system comprising 10.00 Mtr. Rupees Two Hundred Sixty 263.00

unplasticised polyvinyl, chloride rigid material with ignition free & flame Three Only

proof confirming BS .All necessary accessories and measuring of

following sizes. [1] 75 mm x 50 mm trunking.[MK, LEGRAND, OBO

make Only]

73 Supplying & Erecting following size of Light duty “A” Class G.I. Pipe 10.00 Mtr. Rupees One Hundred 171.00

& erecting as directed by Engineer-in-charge. For 25 mm dia. Seventy One Only

74 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 50.00 Mtr. Rupees Three Hundred Fifty 359.00

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be laid Nine Only

90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage

1.0 mm thick cable clamp or in existing DWC pipe underground or road

crossing or floor of following size of cables.For 4 core x 4 sq.mm.

75 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable 30.00 Mtr. Rupees Two Hundred 215.00

multistrand Aluminium conductor for 1.1 KV. to be laid 90 cms. Under Fifteen Only

ground or to be laid on wall with suitable G.I. heavy guage 1.0 mm thick

cable clamp or in existing DWC pipe underground or road crossing or

floor of following size of cables.. (B) 3 1/2 core 35 Sq. mm (16 Sq. mm

76 Providing & laying HDPE Double walled corrugated pipes (DWC) 50.00 Mtr. Rupees One Hundred Eight 108.00

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of Only

450N capacity with anti rodent and ultra violet material properties with

necessary connecting accessories of same material at required depth to be

laid 90 cms. under ground for laying of cable below ground / road surface

for enclosing cable and back filling the same to make ground as per

original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test

Certificate to be Submitted)

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

77A Providing & fixing double compressed heavy duty flange type brass 5.00 Each Rupees Fourty Three Only 43.00

cable gland with rubber ring for P V C insulated armoured cable complete

with outgoing tails, insulating tape etc. For following size cables. For 2 to

4 core x 2.5/4.0 Sq. mm (Sigma, MCI, Comet Make Only)

77B For 3*1/2 core* 35/50 Sq. mm.(Sigma, MCI, Comet Make Only) 5.00 Each Rupees Seventy Five Only 75.00

78 Providing & fixing Solderless crimping type Copper lugs conforming to 50.00 Each Rupees Eight Only 8.00

IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

79 Providing & fixing Solderless crimping type Aluminium lugs conforming 20.00 Each Rupees Twenty Only 20.00

to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium

plated nut bolts in an approved manner.For 35/50 Sq.mm.

80 Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte 20.00 Mtr. Rupees Sixteen Only 16.00

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. For One wire 1.50 sq. mm

81 Providing and Laying of Mains with ISI marked, 1.5 KV grade 19.00 Mtr. Rupees Fifty Three Only 53.00

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper

lugs, nuts and bolts if required. One wire 6.00 sq. mm

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

82 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte 20.00 Mtr. Rupees Eighty Seven Only 87.00

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. One wire 10.00 sq. mm

83 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte 50.00 Mtr. Rupees One Hundred Thirty 134.00

multi stranded, annealed copper conductor with heat resistant PVC Four Only

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. One wire 16.00 sq. mm

84 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte 20.00 Mtr. Rupees Two Hundred 223.00

multi stranded, annealed copper conductor with heat resistant PVC Twenty Three Only

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. One wire 25.00 sq. mm

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

85 Providing and erecting open well type horizontal submersible mono block 2.00 Each Rupees Eighteen Thousand 18561.00

pump set with cast iron body having [A] For 5 HP 3 phase open well Five Hundred Sixty One Only

horizontal mono block pump set suitable for 1350 LPM to 310 LPM@

10 to 42 mtr head suitable for 50 mm dia delivery pipe with 10 mtr.

necessary Size 3 Core Flat copper flexible cable. (Body: Cast iron /

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS

material test certificate from manufacture shall be submitted).

For 5 HP 3 phase open well pump single/multi stage as per actual head

requirement as per site situation.

The model of the pump with respect to head and discharge will be

approved by EIC.

Pump should have following specifications:

(1) Minimum 10 mtr. Cu. flat cable of suitable size must be provided with

(2) Pump shall be installed as per manufacturer foundation/erection

drawing or as per IS specification.

(Body full C.I., stator winding- copper, rotor- copper, shaft- SS 304, motor-

Energy efficiency)

86 Lowering of existing submercible motor pump set complete with 2.00 Per Job Rupees Eight Hundred 848.00

required No. and size of pipes by means of proper chain pulley block and Fourty Eight Only

pipe wrenches. Job includes stacking of pipes cronologically after the

checking of threads. [d] For open well horizontal submercible pump set

for sump well. (i) 1 HP to 5 HP

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

87 Supplying and erecting approved make 5 HP DOL type motor control 1.00 Each Rupees Fourty Five 46761.00

cubical panel made from 16 G. CRCA sheet duly epoxy powder painted Thousand Two Hundred

inside and outside with hinged doors and locking arrangement Floor Sixty One Only

Mounting On 300 mm Height with MS Stand Angle & CC Foundation.

Size 35 mm (H) x 35 mm (W) x 05 mm (D). The detail specification &

quantity of material used are as under.

Panel must be with minilec relay for auotmatic change over for pump 1 &

2 logically without using manually change over switch (Minimum Panel

Size: 1.10 meter (H) x 1.10 meter (W) x 0.25 meter (D).

INCOMMER SECTION: (1) MCCB-30 KA-FP (DU-100H), Rating:

Amp., Make: L&T, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating: 0-

6 Amp., Rotary, Make: Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65),

Rating: 6 Amp., Rotary, Make: Salzer, Qty: 01 No. (6) C.T.- Current

Transformer, Rating: 60/5 Amp., Make: Virat, Qty: 03 Nos. (7) Indicating

Lamps (R,Y,B), Rating: 22.5 mm LED, Make: Airon, Qty:03 Nos. (8) SP

MCB , Rating: 20 Amp., Make: L&T , Qty: 03 Nos. (9) Control Wiring,

Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot (10) Copper Busbar, Rating:

63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

Outgoing Feeder (5 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10

KA, Rating: 20 Amp., Make: L&T, Qty: 02 Nos. (2) Power Contactor

(415 V) Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos. (3) Over Load

Relay, Rating: 9-15 Amp., Make: L&T, Qty: 02 Nos. (4) Digital Ameter

(SR-65), Rating: 0-20 Amp., Make: Meco, Qty: 02 Nos., (5) Digital

Voltmeter (SR-65), Rating: 0-500 V, Make: Meco, Qty: 02 Nos. (6)

Indicating Lamps (Start,Run,Trip), Rating: 22.5 mm LED, Make: Airon,

Qty: 04 Nos. (7) Push Button (Start,Stop), Rating: 22.5 mm, Make: Airon,

Qty: 04 Nos. (8) SPP, Rating: 415 V, Make: Space, Qty: 02 Nos. (9)

Terminal, Rating: As per Amp., Make: Airon, Qty: 04 Nos. (10) Control

Wiring, Rating: 1.0 Sq.mm., Make: Any ISI, Qty: Lot (11) Power Wiring,

Rating: As Per Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA,

Rating: 6 Amp., Make: L&T, Qty: 01 No. (2) Capacitor- MPP Type,

Rating: 2 KVAr, Make: Concap, Qty: 01 No., (3) Power wiring, Rating:

As Per Amp., Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA,

Rating: 32 Amp., Make: L&T, Qty: 01 No. (2) Power wiring, Rating: As

Per Amp. (3) Earthing Strip: 25 x 3; G.I. Strip, Qty: 01 No. (4) MCB-DP-

10KA , Rating: 20A, Make: L&T, Qty.:01 Nos.

88 Providing & erecting ISI make medium duty (B class) galvanized MS pipe 30.00 Mtr. Rupees Two Hundred Sixty 260.00

with coupling, bend, union, reducer, tee, MS flange etc. with plumbing Only

charges. 50 mm dia.

89 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI 3.00 Each Rupees One Thousand Ten 1010.00

marked with packing, flange, nuts and bolts etc.suitable for following pipe Only

size. 50 mm dia.

Item Estimated Rate [Rs. Ps.] Amount Rs.

Description of Item Qty. Unit

No. In Words InFigure

90 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect 1.00 Each Rupees Two Hundred Thirty 232.00

suitable kitkat fuse / MCB to be . erected on polished wooden board Two Only

inside the box with hinged/sliding door with rubber rings and erected on

pole with suitable pole clamp, all duly painted with one coat of red oxide

and two coats of paints. (Cost of Fuse / MCB shall be taken extra)

[Provision for motors cable joints near sump]

91 Providing water proof straight joint in PVC insulated flat flexible 2.00 Each Rupees One Hundred Eighty 188.00

copper cable by using insulated material water proofing material and Eight Only

making the joint complete. UP to 10 Sq.mm

92 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 30.00 Mtr. Rupees One Hundred Fourty 145.00

flexible Submersible copper cable approved make of following Size. (C) Five Only

3 Core x 4 Sq. mm

93 Dismantling the existing light, fan, bell, clock, independent plug point, 10.00 Each Rupees One Only 1.00

wiring with mains of all types along with accessories etc. complete.

Note:- Dismantled Materials to be handing over to dept.

94 Dismantling the existing switchgears, DB and Busbar of any size complete 30.00 Each Rupees Seven Only 7.00

with / without board or angle iron frame.

Total Sch B-2 electric cost Rs.

Total Cost Civil+Ele.(B1+B2) Rs.

Signature of contractor Executive Engineer

G.S.Police Housing Corp.Ltd.