Construction Of New Anganwadi Building At Nambukurichi Panchayat PULLAMBADI PANCHAYAT UNION

Amount

Construction Of New Anganwadi Building At Nambukurichi Panchayat PULLAMBADI PANCHAYAT UNION.Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blastering but inclusive of shoring strutting and boiling outwater whenever necessary etc complte complying with standard specification.

Supplying & Filling in basement with filling River Sand in layer of not more than 15cm thick well rammed etc.,complete

Cement concretein C M 1:4:8 mix using40mm ISS HBG metal for foundation&flooring including labour charges etc.complete

Brick Work in cement mortar1:5 mix using country bricks 83/4"x43/8"x23/4" and conveyanceof all labour charges etc complete-10cum

Supplying & Erecting centring for sides & Sofits of RCC slabs of plane surface like lintels,beams,etc,including strutting 3m high using mild steel 25mmx25mmx3mm laid over silver Oak (C.W)joists of size 10cmX6.5cm(spaced at about 90cm c/c) and supported dy casurina props of 10cmto 13cm dia (spaced of 75cm C/C) complying with standard specifications Below the basement level

Below the basement level

Supplying and fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc.,complete

RCC 1:1/2:3 mix using 20mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering,and ost of reinforcement grill,out including curing etc complete and also including fixing fan clamps and texture in RCC works wherever necessary as directed by

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 - 10mm thick including packing,providing cement mortar beading for sunshades Staircase,steps,lands slabs etc.,as directed by departmental officers etc.complete complying with standard.

Plastering with cm 1:5 mix (one cement and five sand)to 12mm thick including cost and conveyanceof all materials in all floors etc.,as directed by departmental officers etc,complete complying with standard specifications.

Paving the floor with Ceramic tiles using CM1:3 of 305x305x6mm size etc.

Dadooing the wall with Glaged tiles(colour shade as directed)of size 305mm x200mmx6mm in all walls over a base layer of cement mortar1:2(one cement and two sand)20mm thick laid in-situ and pointed with same coloured cement as directedby the departmental officers.etc.

Prioviding weathering course with best quality of brick jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being 32 to 12.5 well beated with Wooden beaters for giving required slope and thickness as directed by the departmental officers.etc.

Finishing top roof mix one course machine pressed tiles of size 23cm x 23cm x 2cm approved qty with, CM 1:3 12mm thick mixed with WPC at 2%by weight of cement used and top pointed with the same morter etc

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc.,complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved quality and colour over a priming coat,including through scrapping,clean removal of dirt etc complete.

Painting with enamel paint two coats including cost & conveyance to size and all labour charges etc., complete

Providing Granolythic floor finish with cc 1:2:4 using 10-12mm thick

Fabricating Supply and fixing and position of MS doors with single leave.the door outer frame will be 40x40x6 mm MS angle, the shutter frame.will be 35x35x6mm MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x25x5 mm flats covered with 18 gauge M.S sheet with necessary hinges,tower bolts,aldrop length 30mm and hold fast etc.,complete with one coat red oxideprimer.D1 Door Size 0.90MX2.10M

D2 Door Size 0.75MX2.10M

D3 Door Size 1.10M X 2.10M

Fabricating Supply and fixing and position of MS Windows with two leave.the widow outer frame will be 35x35x6 mm with MS angle, the shutter frame.will be 25x25x6mm MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x25x5 mm flats covered with 18 gauge M.S sheet with necessary hinges,tower bolts,aldrop length 30mm and hold fast etc.,complete with one coat red oxideprimer. W1 Window Size 1.20M X 1.30M

Supply and fixing in positionIndian Water closet of size 580x440mm, white glazed earthen ware of approved quality with "P" trap or 'S' trap conforming to IS:2556 - Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lime concrete flooring alround 1:2:5 (one part of lime,two parts of ) IWC

Supply and Fixing of Cudappah slab including cost and labour charges etc.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 20

Suuplay and fixing CFl light fitting and all labour Charges SD 80

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 88 ]

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,&clamps etc

500 lit syntex tank (TWAD-2017-18)

Provision of water supply arrangements

Provision for sanitary arrangements

Provision for Soak Pit

Provision for Labour Charges for fixing Door and Windows etc.,

Provision for Labour Charges for Cartoon Drawing

Provision for Name Board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

N JOTHIMANI