15 Percentage Vivekadhin Yojna (2026-27)

NAME OF WORK :- Supplying, Installing & Commissiong of Street Lights From Dhrangadhra Surendranagar

Highway towards Rajmahel Wall at Dhrangadhra.

No. Description Quantity RATE Per Amount

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mm X 7.5mm

Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm

thickness with 225mmX225mmX16mm base plate, 4-

M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 67 kg 12.00 12553.29 Nos.

2 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. 12.00 4248.06 Nos.

Providing and erecting street light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/ 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check

nut complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms.

[A] Single Arm bracket 1 Mtr 12.00 614.08 Nos.

4 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench

/ pipe at road crossing or floor of following size of

(B) 4 core 16 Sq. mm 270.00 1235.23 Rmt.

5 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 84.00 58.58 Rmt.

providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III 12.00 123.22 Nos.

7 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire. 12.00 368.65 Nos.

8 Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG. 12.00 77.77 Kg.

9 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia 270.00 62.62 Mtr

10 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. cable trench excvation refilling

(D) 2 to 4 core 16 Sq. mm 260.00 47.47 Mtr

11 Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

12 Supplying & erecting power contactor ,AC3 duty for time

switch complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp. 1.00 2782.55 Each

Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported

on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other with

nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder

coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 95 cm long made

from 40 X 40 X 6 mm thick MS angle. 1.00 16691.26 Each

14 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. 96.00 7.94 Nos.

15 Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size

x 60 x 150 cm. Deep in below ground level with plinth of

45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground

level with necessary curing and finishing in approved

manner. 12.00 15.15 Each

NOTE :-The rates quoted shall be exclusive of GST but Inclusive of all other taxes, duties which shall not be

paid extra. While GST will be paid for admissible part of actual work done at the approved tender rates. GST

Shall be paid as per prevailing rates at the time of payment.