INTERNAL ELECTRIFICATION WORK IN PHC MAIN BUINDING AND RESIDENTIAL QUARTERS (TYPE IIND 2NOS) and (TYPE IIIRD 1NO) and (TYPE IV 1NO.) AT JAMNIKHAL UNDER BLOCK DEVPRAYAG T.G

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

same as above but for 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

……do….. But with 2 nos x 4 sq.mm in 19mm dia conduit with 1 no. 4 sq.mm. PVC insulated copper conductor earth continuity wire.

……do….. But with 2 nos x 6 sq.mm in 19mm dia conduit with 1 no. 6 sq.mm. PVC insulated copper conductor earth continuity wire.

4X 10 sq. mm + 2 X 6 sq. mm earth wire

2x10sqmm+1x6sqmm earth wire

S / F brass holder/ batten / angle holder including connection etc. as required.

S/F 3 pin 5/6 A celing rose on the existing junction box i/c connections etc as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and laying 6 SWG GI wire at 0.50 metre below ground level for conductor earth electrode including connection termination with GI thimble etc as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 WAY SPN

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 WAY SPN

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

S/F 5A to 32A rating 240/415V 10KA C Curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB Complete with connections ,testing and commissioning etc, as required.single pole.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. TRIPPLE POLE

Supply and fixing of two module stepped type electronic fan regulator on the existing modular plate switch box i/c connections but excluding modular plate etc as required..

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Installation of exhaust fan in the existing opening, including making good damage,connection,testing,commissioning etc. as required.Upto 450 mm sweep

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primerand finish paintetc. as required.

Providing and fixing following rating and breaking capacity andpole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200A 16KA TPMCCB

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required

Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Supply and burring of Safe Earthing Electrode T-19 Zn Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified

s/f hexagonal/round G.P fan box of approved make made up of 1.o mm thick ISI Marked G.P sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box holes should be semi shuttered typewith 0.5 mm g.p sheet made upper & lowercoverduly screwed fittedwith 300mm round zink coted completion of the work.

s/f of L.E.D tube light with batten suitable for upto 1x22 watt LEDtube light fitting including tube on surface complete in all respect.CATAAA

Supply and burring of Safe Earthing Electrode T-19 Zn Zinc Coated, Length 2000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & con

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect.

Supply and fixing of recess/ Surface/ Pendent mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect..

S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit complete in all respect

S&F of 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect

Supply and fixing of fire extinguisher ,ABC type 4.00kg capacity (ISI Marked IS; 15683 &TAC approved) complete with initial charge and wall bracket ,along with supply of all materials and labour for proper completion.

SYSKA Self Ballasted LED Lamps for General Lighting Service 10 Watts .

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surf

S&F of 200 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer in charge.

S&F of 200 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sq. mm 3-1/2 core

S/F of 9inches Exhaust fans.230mm.

S/F of Wall fan.make crompton including all.

S/F OF LED LAMP.12WATT INCLUDING ALL.

SITC of electric hot water gyser including all.

SUPPLYING INSTALLATION TESTING AND COMMISSIONING OF A.C (2 TON) INCLUDING ALL.

SUPPLYING INSTALLATION TESTING AND COMMISSIONING OF SOLAR WATER HEATER CAPACITY 200L INCLUDING ALL.

SUPPLY INSTALLATION TESTING AND COMMISSSIONING OF D link network switch L3 for cloud ON SITE support from OEM D-LINK( 16 PORT POE SWITCH)

SUPPLYING AND FIXING OF UTP CAT-6 RJ45 IO FACE PLATE.

SUPPLYING AND FIXING OF UTP CAT-6 1 MTR PATCH CORD.

SUPPLYING AND FIXING OF UTP CAT-6 3 MTR PATCH CORD.

SUPPLYING AND FIXING OF CAT-6 24 PORT PATCH PANEL.

SUPPLYING AND FIXING OF 12 U RACK WALL RACK.

Supply of main Oxygen manifold (3+3) cylinder with NRV ,flexible pipe and middle frame

Supply of fully Automatic Oxygen control panel (indigenous)

Supply of regulator (Double Gauge Double Stage)

Emergency valve

2 cylinder Emergency Oxygen manifold complete with tail pipe NRV and pressure reducing system,

Supply of regulator (Single Gauge Single Stage)

Copper pipe of medical use 22 OD x 1.0 mm

Copper pipe of medical use 15 OD x 1.0 mm

Copper pipe of medical use 12 OD x 1.0 mm

Isolation valve for 15 mm copper pipe

Oxygen outlet point

Oxygen flow meter bpc with humidifire bottle

Digital Alarm system oxygen

Isolation valve for 12 mm copper pipe

valve box

Supply ,installation testing and commisioning of main fire pump with 900lpm at 35 mtr head.

Fire Pump Pannel System with main pump

Supply ,installation testing and commissioning of hydrant line with rises with c class MS Pipe including welding primer paint with all fitting such as MS jocket clamp fasteners teflon tape make-jindal.apollo,surya,swastik (80mm dia)

Supply ,installation testing and commissioning of hydrant line with rises with c class MS Pipe including welding primer paint with all fitting such as MS jocket clamp fasteners teflon tape make-jindal.apollo,surya,swastik (50mm dia)

Supply ,installation testing and commissioning of hydrant line with rises with c class MS Pipe including welding primer paint with all fitting such as MS jocket clamp fasteners teflon tape make-jindal.apollo,surya,swastik (25mm dia)

Supply installation testing and commissioning of 25mm dia 40mtr long swing type 180 degrees adjustable with complete drum set firsaid hose reel with nosel (brass nosel ) with complete fitting make-life line safety ,safe pro,omex etc.

Supply installation testing and commissioning of (SS) single head ianding wall complete set (63mtr dia) make- agni, index, omex or lfeline Safety masc)

Supply installation testing and commissioning of set of RRL pipe for the use of landing wall including with mail femail coupling life safety safe ex index (a set of one pipe with the length of 15mtr)

Branch pipe with nosel

BUTTERFLY VALVE 80MM DIA

non return valve (NRV)80MM DIA

s/f firebrigade inlet four way (Ms)

supply installation testing and commissioning of sprinkler with 15mm quartzaid rating 68 degree centrigate pendant type.

s/f of pressure switch.

Please Enable Macros to View BoQ information