REPAIR/MAINT/REPLACEMENT OF INTERNAL ELECTRIFICATION, SUBMAIN WIRING IN MH AREA, 12 CDU, ECHS, CE OFFICE ,ASHA SCHOOL ,KURC-2 AND ADJOINING AREA UNDER GE (A) NO 2 JODHPUR

Amount

Taking down carefully aluminium/copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engineer-in-charge.

M&L for point wiring (Concealed modular) complete for one light point / fan point / exhaust fan point / bell point controlled by one 1-way switch / bell push, with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed by engineer-in-charge. Note : 1. The cost of modular type Metal flush boxes and modular accessories like inner/outer cover plates etc is deemed to be included in quoted rate. 2. The cost of cutting chases on wall and making good surface on wall are deemed to be included in the quoted rate

All as per srl item No 02 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

All as per srl item No. 02 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

All as per srl item No 02 here-in-before but for one light point controlled by two 2-way switches

All as per srl item no. 02 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire complete all as specified and directed by Engr-in-Charge

S & F Modular Switch one way 6A , 1 module size complete all as directed.

S & F Modular Switch two way 6A , 1 module size complete all as directed.

S & F Modular Switch one way 16A , 1 module size complete all as directed.

S & F Modular Bell push way 6A with 2 module size with indicator complete all as directed.

S & F Modular Socket, 6 A ,5 Pin,2 module size complete all as directed.

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F of Modular type regulator 2 module A/C 240 Volts Note: Make of Modular switches / sockets and other accessories : Anchor (Woods) / Legrand (Myrius) / Havells.

M&L point wiring (Concealed Normal) complete one light point / fan point / exhaust fan point / bell point controlled by one 1-way switch / bell push, with with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed. (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per srl item No 14 here-in-before but for One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per srl item No14 here-in-before but for One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item No 14 here-in-before but for One light point controlled by two nos, 2-way, 5 Amps switch.

All as per srl item No 14 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

M/L Point wiring complete one light point / fan point / exhaust fan point / bell point controlled by one 1-way switch / bell push with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves Dash-fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenlic laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed

All as per srl item No 19 here-in-before but for One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per srl item No 19 here-in-before but for One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item No 19 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Socket, two-in-one, 5 pin, 5 Amp, Universal type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all s specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

Supply and fixing in repair Electronic type regulator 240 Volts. Make Anchor or equivalent of Cona/SSK/Gold Medal

S&F of Bell push, flush type 5 amps, 230 volts. Make : SSK / Havells (Reo) /Cona

S&F of Electric Call bell ding dong AC 230 volts Single Pole complete all as specied and directed by engineer-in-charge.Make :Cona / Havells / Crompton

S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Havells / SSK /Cona

S&F of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Wall mounting light fitting City 2 and including suitable size 9 W retrofit LED bulb and making necessary electric connection, complete all as specified and directed. Make : Havells City 2 / Philips / Crompton

S&F Aviation obstruction light fitting 110-277 V,5 Watts and making necessary electric connection, complete all as specified and directed. Make : Havells / Philips / Crompton

S&F Wall Mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 9W retrofit LED bulb and making necessary electric connection, complete all as specified and directed.Make : Havells / Philips / Crompton / Wipro

S&F in replacement Recessed/Surface LED 1x4 panel ceiling light with high performance 40 watt Make : Crompton Cat part No LCTLRN-40-CDL(1X4) or equivalent make approved by engineer-in-charge.

S&F in replacement of recessed mounted LED light fitting of 600 mm X 600 mm size, suitable for false ceiling,not less than 34/36 Watt, 6500K white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections complete all as directed. Make : Havells / Philips / Wipro / CG or equivalent

S&F in replacement of recessed mounted LED light fitting of 600 mm x 600 mm size, suitable for false ceiling,not less than 34/36 Watt, 3000K warm white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections complete all as directed. Make : Havells / Philips / Wipro / CG or equivalent

S&F of LED light fitting 1 X 20/22 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.

Supply and fixing in replacement of Energy efficient round / square recessed mounted polycarbonate fixture flat panel not less than 12W LED 3000K Warm/ white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply and fixing in replacement of Energy efficient round recessed mounted polycarbonate fixture flat panel 6W LED 3000K Warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply and fixing in replacement of Energy efficient round recessed mounted spot light 2 W LED 3000K Warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply and fixing in replacement of Energy efficient round recessed mounted spot light 2 W LED RED/GREEN/BLUE down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

S&F LED strip 22 W Flexion 3000K with suitable driver and making necessary electric connection complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No LHEHCPP5IN1W018/WIPRO/CROMPTON

S&F in replacement of Spike LED COB Garden light not less than 10 W LED, Anthracite colour, made by aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Philips/Wipro/Crompton/Havells

S&F in replacement LED ceiling light driver 24W to 36W, 240V and complete all as specified and directed. Make : Havells /CG / Wipro / C&S

S&F exhaust fan made of sturdy engineering plastic 200 mm sweep including louvers with cutting chases on brick wall and grounting with nut bolts on aluminium frame complete all as specified and directed by engineer-in-charge. Make : Crompton / Havells / Orient / Surya / Bajaj Note : Rates are deemed to be included for cutting chasing on wall or window, grouting with nut bolts etc

All as per item No 46 here in before but 250 mm sweep complete all as specified and directed by engineer-in-charge.

Taking down old unsv recess / surface mounted light fitting and Fixing only with LED surface / recess ceiling light fitting of any wattage, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. Note : LED recess / surface mounted light fitting shall be issued under Sch 'B'

M&L for rebalancing the electric load on UPS /DB (single /three phase) as required including checking of the existing electrical items / points for serviceability of continuous electric supply, rectifying including carrying out minor repairs / replacement etc as required to make the item functional and replacement of small pieces of wire, screw, refixing of hanging wires / Light fittings / ceiling fans / exhaust fans, DBs and switch boards etc all as specified and directed by Engr-in-charge.

S&F sheet metal enclosure SPN 240 Volts having two pin and earth plug and socket with one single pole MCB 20 Amps complete all as speciied and directed by engineer-in-charge. Make : Legrand / Havells / ABB.

Taking down carefully Unsv main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed by engineer-in-charge.

S&F of Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB upto 125 A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Indoasian / Havells / Legrand Note : MCCB & MCB will be measured and paid separately under respective items

All as per item No 52 here in before but TPN 4 way (Concealed flush to wall), Distibution Board

S&F of Distribution Board, Double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and Vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Havells / Indoasian / Legrand

All as per item No 54 here in before but SPN 4 way (Concealed flush to wall), Distibution Board

Taking out old worn out wooden frame / steel frame and supply & Single door sheet metal board complete with flush door handle with locking arrangement painted with powder coated finishing with necessary PCC work complete size 1000x1000x300 Make : BCH Cat Part No BIL 50540 or Equivalent make in Hensel

All as per srl item no. 56 here-in-before but size 800x800x300 Make : BCH Cat Part No BIL 50310 or Equivalent make in Hensel

S&F of MCCB, A Frame, thermal adjustable magnectic setting, Ics = 75% 16 kA, 415V, 125 Amp, 4 Pole MCCB with over load and short circuit protection, complete all as directed. Make : Havells / Schneider Elect / Legrand / ABB

All as per item No 58 here but 100 A, 4 Pole MCCB complete all as specified and directed.

S&F of MCB, C Curve type, 10 kA, 40 to 100 Amps, TPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells

S&F of MCB, C Curve type, 10 kA, 40 to 63 Amps SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells.

S&F of MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells.

Taking down old sub main wiring and M&L for sub main wiring with 2 run of 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate casing caping, ISI marked, 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Two run of 10 Sq.mm. and one run of 10 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces. Make of wire : Finolex/Havells/KEI, Make of PVC conduit : Finolex/Modi/Polycab.

All as per srl item No 63 here-in-before but with 2 run of 6.0 sq mm FRLS copper wire with one run 6 Sqmm FRLS copper cable as earth wire.

All as per srl item No 63 here-in-before but with 2 run of 4.0 sq mm FRLS copper wire with one run 4 Sqmm FRLS copper cable as earth wire.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed by engineer-in-charge.

M/s R K Enterprises (BID ID -3182217)

Nikhat nirman (BID ID -3175784)

M/S VENUS BUILDER (BID ID -3173367)