Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹17.6 Laccepted-aoc | ₹17.6 L | accepted-aoc |
Tender Value
₹23.7 L
EMD Value
₹23,800
Closing Date
19 Feb 2026, 3:00 pmClosed
The Chief Engineer TTD Tirupati
O/o Executive Engineer XIV TT Devasthanams Room No.01 1std Floor TTD Annexure bldg. near Admn Building KT Road Tirupati Chittoor District Andhra Pr
Providing fencing and barication to the bull shed and filling of sand bed to the sheds area in Gosamrakhshnashala at Kamalaiah gari palli near Bhakarapeta, Tirupati District
895602
165/EE-XIV/TTD/2025-26
OPEN - NCB
Civil Engineering Works
TIRUPATHI
5 documents required · 5 mandatory
₹840
₹23,800
6 Mar 2026
6 Feb 2026
6 Feb 2026
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work -do- Ordinary soil-MECHANICAL means up to 3m depth
Note: Cost of dewatering up to 5% of (a+b) may be added, where required, up to 10% of labour cost. Assessment for dewatering shall be made as per site conditions.
Filling of foundations and basement with best river sand in layers of not more than 15 cm thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.
Conveyance of excavated earth / debris with a lead of 5.0KM from the work site including loading at site of work and unloading the same at the place specified by the department during execution etc., complete.
Supply of Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution. The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1. The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. -3"x3" (76 mm x 76 mm) - 8 Gauge ( 4mm)
Supplying and fixing MS pipe/square tubes/channel/angles/flats for fencing including painting the pipe with Synthetic enamel paint in two coats of approved brand and colour paint over a primary coat (red oxide metal primer) ( total 3 coats) including cost and conveyance of all materials and welding charges as directed during execution complying with standard specifications
MS Angles, Channels & Flats
Supply of the following labour for the maintenance of the miscellaneous works at in and around theTemple premises as and when required etc. complete as directed during execution by the department.
semi skilled - welders
Hire charges of Welding set as directed during execution
Supply of Welding electrodes 4 mm dia
Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.
-do- Single coat for old Iron Work & old plastered surface
Rupees Twenty Three Lakh(s) Seventy One Thousand Six Hundred Forty Seven And Paise Forty Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOQ_165.xlsx
TENDER_DOCUMENT • 0.34 MB
NIT_165.doc
TENDER_DOCUMENT • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].