REPAIR TO VARIOUS STEEL FURNITURE UNDER GE WEST BAREILLY

Amount

ALMIRAH STEEL LARGE/MEDIUM WITH SHELVES (FD-67/FD-1031/FD-1032) M&L for replacement of following unserviceable parts of Steel Almirah large/medium all as specified and shown on drawing and as directed. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Lock of steel Almirah Large /Medium with MS lock 50 mm with 6 lever brass, Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved. Make: Harrison, Link, Godrej.

Handle of Almirah large/Med steel with chromium plated 150 mm long Godrej pattern best quality as approved.

Bush (handle seat) of Almirah large/Med steel with best quality bush made of brass as per sample approved.

MS hinges 75 mm long heavy duty including necessary painting as per sample approved.

Corner cleats for supporting shelves made out of 3 mm thick MS black sheet, bent to the shape as per sample and to be fixed with suitable machine screws under shelves.

Base legs of Almirah large/med steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX70mm wideX440 to 485mm long as reqd for almirah duly welded with Electric arc welding to the Almirah including necessary painting to match the existing surfaces all as directed.

Electric arc welding to the broken joints upto 10 cm long of Almirah large/medium steel as required including necessary painting to match the existing surfaces all as directed.

Shelves of Almirah large steel, made out of MS black sheet 1 mm thick of size 450X920mm, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

All as per item no 1.08 but shelves of Almirah medium steel of size 405mmx765mm.

Three way locking device made with 10mm mild steel round bar fixed with shutter of Almirah Large Steel complete with all accessories including lock,MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

All as item no 1.10 but locking device for Almirah med steel.

Cover made of 1mm thick MS sheet bent to the shape & size as per drawing suitable for Almirah large/Almirah Medium with shelves for locking device duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Removing of dents and bends of Almirah Large steel wherever required including welding where required, cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

All as per item no 1.13 but Almirah med steel..

ALMIRAH STEEL LARGE MAP(FD-E6/MAP18) : M&L for replacement of following unserviceable parts of Almirah steel large MAP all as specified and shown on drawing and as directed. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Removing the u/s hanging road and S& F new hanging rod of 20mm dia chromium plated steel conduite pipe with side stoppers as per as specified and direrected.

Removing the u/s locker handle and S&F new locker handle of Godrej pattern as per existing shape and size.

Removing the u/s drawer handle and S&F new drawer handle of as per existing shape and size.

Removing the u/s steel handle and S&F new handle with chromium plated of Godrej pattern as per drg and spcified as directed.

Removing of u/s MS lock 50 mm and S&F new lock of 6 lever brass, Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved. Make:Harrison, Link, Godrej.

Removing of dents and bends of Almirah Large steel MAP wherever required including welding , cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

TABLE DINING OR'S (DRAWAING NO : FD-165) M&L for replacement of following unserviceable parts of Table dinning (OR’s) all as specified and shown on drawings and as directed by the Engineer-in-Charge. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed

Table legs with 25 mm MS square tubes 760mm long, 1.6 mm thick , duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete.

Top frame long rail/long stiffner with 25 mm MS square tube 1.6 mm thick & 1600mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete.

Top frame short rail/short stiffner with 25 mm MS square tube 1. 6 mm thick & 515mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing surface over a coat of red oxide primer complete.

Table top with 18 mm thick MDF Pre-laminated board conforming to IS specifications as approved of size 1900 x 685 mm duly covered with 22 gauge thick aluminium sheet as required for top complete.

Replacement of rubber shoes with best quality hard rubber shoes as approved.

Electric arc welding upto 10 mm long to the MS pipe joints of table dinning ORs as required and as directed.

Removing dents and bends wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green to all exposed steel surfaces by spray painting up to a glossy finished shade complete.

CHAIR VERANDAH (DRAWING NO : FD-359 & FD- 256) .

M&L for removing unserviceable plastic cane from the chair verandah and reweaving of seat & back of chair verandah steel with white plastic cane 4mm wide and 0.5mm thick closely knitted/canning with and including 4 Nos hard rubber shoe of each chairs shall also be provided to the legs of chair including removing dents / bends wherever required and cleaning all steel surface thoroughly by using abrasive cloth emery of various sizes and applying putty as required as per trade pattern and painting the steel chair verandah frame with two coat of white synthetic enamel paint of Ist quality over a coat of red oxide primer complete all as specified and directed

Removing unsv conduit pipe of any length & supply and fix MS conduit pipe 20mm dia of length 1.6mm thickness, 150mm to 200mm length, welding, finished with grininding as per drg all as specified and as directed .

TABLE BED SIDE STEEL TYPE I & II (HFD-2005) M&L for replacement of following unserviceable parts of Table Bed Side Steel all as specified and shown on drawing and as directed. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Replacement of wheel/ Castor 50mm dia with locking facility and rear end buffers of table bed side steel type I as per drawing complete.

Replacement of stainless/Mild steel door 20 GA of table bed side steel type I as per drawing complete.

All as per item no 5.02 but door having ventilation louvers of table bed side type II.

Replacement of Cam lock (Brass) of table bed side steel type I as per drawing complete.

All as per item no 5.02 but drawer of table bed side type I.

Taking down u/s plywood and S&F new ISI marked plywood of 406x406x12mm thick of table bed side type I as per drawing complete.

Taking down u/s SS top and S&F new suprerimposed stainless steel top of 24 GA of size 410x410mm with 2 cm raised edges on three sides of table bed side type I as per drawing complete.

All as per item no 5.06 but SS top of size 400x400mm of table bed side type II.

Taking down u/s Aluminium strips and S&F new ISI marked Aluminium strips of required shape and size of table bed side type I as per drawing complete.

Taking down u/s buffers and S&F new ISI marked High Density Polumer buffers of required shape and size of table bed side steel type I as per drawing complete.

Replacement of rubber shoes of table bed side steel type II as per drawing complete.

Taking down u/s kob and S&F new Brass knob with blank of table bed side type II as per drawing complete.

Taking down u/s MS tubular leg and S&F new MS tubular leg of 18 SWG of required shape and size of table bed side type II as per drawing complete.

Electric arc welding to the broken joints upto 10 cm long of table bed side steel as required including necessary painting to match the existing surfaces all as directed.

Removing of dents and bends of Table Bed Side Steel wherever required including welding , cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

TABLE OFFICE CLERK STEEL : DRAWING NO FD-84/ FD-1004 M&L for replacement/ repair of following unserviceable parts of table office clerk steel all as specified and shown on drawings. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Replacement of unserviceable table top of size 1200mmx600mm. Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1mm thick laminated sunmica sheet as approved by GE, pasted over the ply with marine garde adhesive and all edges of top shall be covered with 6mm thick teak wood beading/edging as approved , confirming to IS specification of required size as per drawing and fixing & finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed.

Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over a coat of red oxide primer complete.

Hard rubber shoes of best quality as approved.

All as per item no 6.02 but shutter complete (including lock) of table office clerk steel.

Hard plastic handle of drawer of best quality.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Removing dents and bends wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.

TABLE OFFICE OFFICER STEEL : DRAWING NO : FD-84/ FD-1003 M&L for replacement/ repair of following unserviceable parts of table office officer steel all as specified and shown on drawings. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Replacement of unserviceable table top of size 1680mmx870mm. Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1mm thick laminated sunmica sheet as approved by GE, pasted over the ply with marine garde adhesive and all edges of top shall be covered with 6mm thick teak wood beading/edging as approved , confirming to IS specification of required size as per drawing and fixing & finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed.

Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Hard rubber shoes of best quality as approved.

All as per item no 7.02 but shutter complete (including lock) of table office clerk steel.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Removing dents and bends wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.

TABLE 900x600x760MM STEEL WITH DRAWER / WITHOUT DRAWER/ TABLE 900X600 STEEK WITH MARBLE TOP :DRAWING NO : FD-1007 /FD-1008/ FD-1015 M&L for replacement/ repair of following unserviceable parts of table steel all as specified and shown on drawings. All fixing and finishing, welding etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Table top of size 900X600mm made of 18 mm thick MDF Prelaminated board of exterior grade, including 6 mm thick teak wood edging duly polished to be provided to all around the table top complete.

Replacement of u/s/ broken marble top and S&F new marble top of required size as per drg all as specified and directed.

Table drawer with drawers made out of 1 mm thick mild steel black sheet (including lock) size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete.

Hard plastic handle of drawer of best quality.

Hard rubber shoes of best quality as approved

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete.

Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed.

TABLE CENTRE BRASS DRAGWING No : FD-375 M&L for replacement/ repair of following unserviceable parts of table centre brass all as specified and shown on drawings. All fixing and finishing etc shall be done in accordance with the standard workmanship, drawings and as directed:-

Replacement of u/s broken glass top and S&F new glass top of size 1200x900x10mm as per drg all as specified and directed.

Replacement of u/s vaccum rubber shoes and S&F new vaccum rubber shoes as approved quality.

Replacement of u/s PVC rubber shoes and S&F new PVC rubber shoes as approved quality.

Removing dents and bends wherever required and cleaning all brass surfaces thoroughly by using abrasive emery of various sizes and putty as required and applying two coats of brasso polish as per drawing.

CHAIR WRITING (STEEL)/ CHAIR CB/ CBA STEEL : DRAWING NO FD-E6/MAP/12, HFD-2040, HFD-2044, HFD-2041, HFD-2045 M&L for repair/replacement of following parts of variou Chair all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Replacement of arm rest of chair writing made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete.

All as per item no 10.01 but arm rest of chair CBA steel.

Taking down u/s upholstery and S&F new upholstery of seat & back both with PVC Lipping all around complete of various Chairs with best quality Fabric as approved (Rate of fabric not less than Rs 250 per RM ).

Replacemrnt of old/unservicable Seat & Back both complete of various Chairs made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed. (Cost of fabric not less than Rs 250 per RM ).

Taking down u/s MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed.

Welding and removing dents, bends wherever required and cleaning all steel surfaces of various chairs thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.

CHAIR COMPUTER GODREJ / EXECUTIVE (REVOLVING) : DRAWING NO : TP M&L for repair/replacement of following parts of various Chairs all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/ specifications and as directed.

Replacement of arm rest made of polyurethen,black integrated skin with MS insert as per existing shape& size .

Replacement of twin wheel Castor 50mm dia as per sample

Replacement of Peddestrial assembly containing twin wheel castor made of PVC injection moulded in black as per sample.

Replacement of upholstery of seat & back with Fabric best quality as approved (Rate of fabric not less than Rs 250 per RM).

Replacemrnt of old/unservicable Seat & Back both of complete Chair made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per sample & directed. (Cost of fabric not less than Rs 250 per RM).

Replacement u/s hydraulic assembly and S&F new hydraulic assembly complete (except peddestrial assembly) as per existing shape and size.

Welding and removing dents, bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade (Godrej pattern) as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed.

CHAIR COMPUTER : DRAWING NO : E6/MAP/01 M&L for repair/replacement of following parts of Chair computer all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/ specifications and as directed.

Removing unserviceable back rest and S&F new adjustable back rest on 12mm thick Hot presed ply wood , upholstered with fabric and contoure lumber support for extra comfort with PVC lipping all around. Adjustable back rest shall consist of prolift mechanism and can be locked in 5 steps for better lumber support .

Replacement of u/s parts of synchro tilting set up.

Removing u/s seat and S&F new seat as per existing shape and size.

Replacement of upholstery of seat & back with Fabric best quality as approved (Rate of fabric not less than Rs 250 per RM).

Removing u/s handle and S&F new handle having black integral skin, polyurethane reinforced with MS insert. It shall be scratch and weather rasistance.

Replacement u/s hydraulic assembly and S&F new hydraulic assembly as per existing shape and size.

Replacement of twin wheel Castor as per existing shape and size.

Revoming u/s padestal assay with wheels and S&F new padestal assay with wheels, having 600mm pitch centre dia and a 10.05mm dia forged bright zinc plated MS castors pin is of press fitted into each prong for holding the castors as per specified and directed.

LEATHER CUSHION CHAIR WITH FULL DESKLED & PAPER TRAY , MAKE : GODREJ: FD- (TP) M&L for replacement of following unserviceable parts of leather cushion chair all as specified and shown on drawing and as directed. All fixing and finishing, painting and welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Removing u/s seat & back and S&F new leather cushion seat & back complete and fix it properly with the help of screws as per existing shape and size.

Replacement of upholstery of seat & back with Fabric best quality as approved by GE.(Rate of fabric not less than Rs 300 per RM).

Removing u/s handle and S&F new handle having black integral skin, polyurethane reinforced with suitable m/c screw as per drawing. It shall be scratch and weather rasistance.

Taking down of old u/s hand board and S&F new hand board made of 18 mm thick both side prelaminated teak faced MDF board of existing shape & size with PVC edging all around the top & fixed with suitable screws complete.

Taking down u/s MS half round support and S&F New MS Half roud support with duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete all as per specified and directed.

Removing u/s paper tray and S&F new paper tray as per existing shape and size.

Removing us/ hard rubber shoes and S&F new hard rubber shoes as per existing shape and size.

Welding and removing the dents,bends wherever required and cleaning all steel surfaces of Leather cushion chair thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of existing paint (1st grade paint) (Godrej pattern) over a coat of red oxide primer by means spray/ brush to a glossy finished shade all as per specified and directed.

MUTIPURPOSE LEATHERITE CUSHIONED CHAIR WITH & WITHOUT ARM REST MAKE GODREJ: FD- (TP) M&L for replacement of following unserviceable parts of various chairs all as specified and shown on drawing and as directed. All fixing and finishing, painting and welding etc shall be done in accordance with the standard workmanship, drawings and as directed.

Removing u/s cushioned seat & back and S&F new cushioned seat & back complete of multipurpose cushioned chair with arm as per existing shape & size and drawing.

All as per item no 14.01 but leather cushioned seat & back of Leatherite cushioned chair without arm.

Removing u/s upholstery of seat & back and S&F new upholstery of seat & back complete of multipurpose cushioned chair with arm as approved as per existing shape & size and drawing (Rate of fabric not less than Rs 250 per RM) .

All as per item no 14.03 but leatherite cushioned chair without arm (Rate of fabric not less than Rs 300 per RM).

Taking down u/s arm rest and S&F new arm rest made of MS conduite pipe ( 20 Gauge) (double pipe) , painted two coat of sunthetic enamel black paint over a coat of red oxide primer and tightening properly with the help of s/s screws and hard plastic cap as per existing shape & size and drawing.

Welding and removing the dents,bends wherever required and cleaning all steel surfaces of multipurpose cushioned chairs thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of existing paint (1st grade paint) (Godrej pattern) over a coat of red oxide primer by means brush to a glossy finished shade all as specified and directed.

TABLE BED SIDE MAP (DRAWING NO FD E6/MAP/15R) : M&L for repair/replacement of following parts of Table Bed Side MAP all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed :-

Replacement of unserviceable top 18 mm thick one side teak faced MDF prelaminated board required size as per drawing including 6 mm thick teak wood edging and fixing and finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed.

All as per itme no 15.01 but side portion of table bed side.

Replacement of unserviceable back side ply with 12 mm thick commercial grade ply as approved of required size as per drawing and fixing and finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed.

All as per itme no 15.03 but bottom portion of table bed side.

Replacement of unserviceable complete drawer of 18 mm thick MDF prelaminated board and 6 mm thick commercial grade ply as approved of required size as per drawing and fixing and finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed.

Replacement of unserviceable stainless steel handle as per exising shape & size.

Replacement of unserviceable rubber shoes with new hard rubber as approved.

Removing u/s rear legs and S&F new legs with 18 mm mild steel square tubes (18 GAUGE) of required shape and size as per drawings including two coats of synthetic enamel Black paint 1st grade as per existing over a coat of red oxide primer complete.

All as per itme no 15.08 but front leg of table bed side.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed.

Cleaning old/new wooden/steel surfaces thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying good quality polish to wooden surfaces and painting with synthetic enamaled black paint in a glossy finish shade on steel surfaces as per specified and directed.

TEAPOY VERANDAH : DRAWING NO : FD-255/ FD-359/ FD/E6/MAP 17 M&L for repair/replacement of following parts of Teapoy verandah all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Replacement of unserviceable top of size 900x450mm with 18 mm thick MDF Pre-laminated board exterior grade I to IS specifications and 6 mm thick teak wood beading all around the table top to be provided as per drawing.

All as per itmem no 16.01 but top of size 750x450mm.

Replacement u/s MS bar base tray and S&F new bar base tray of 5mm dia (12x10 Nos at equidistant) as per drg and specified.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed.

Cleaning the old and new steel surface of teapoy verandah thoroughly by using abrasive cloth emery as required and applying two coats of white/black synthetic enamel paint 1st grade to all metal/steel surface and providing 4 Nos hard rubber shoes of each as approved by GE.

LOCKER BED SIDE STEEL : DRAWING NO FD-257 / FD-1029 M&L for repair/replacement of following parts of Locker Bedside Steel all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed :-

Replacement of unserviceable/deficient "D" type chromium plated steel handle complete all as specified and directed.

Replacement of unserviceable 75mm long chromium plated steel hasp and staple complete all as specified and directed.

Replacement of unserviceable hanging rod made of MS chromium plated pipe made of 19mm dia 1.6 mm thick and 380mm long with socket complete all as specified and directed.

Electric arc welding to the broken joints upto 10 cm long of the Locker steel as required including painting to match the existing surface as directed.

Base leg of Locker steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX50mm wideX 550mm long as reqd for Locker duly welded with Electric arc welding to the Locker including necessary painting to match the existing surface complete.

Removing of dents and bends wherever required including welding where required, cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete.

FORM WITHOUT BACK : DRAWING NO FD-77 (M) /FD -1027 M&L for repair/replacement of following parts of Form without back all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Replacement of unserviceable top plank with 1st class hard wood, sheesham wood plank 25mm thick of size 1525x255mm free from all timber defects duly well finished as per drawing.

Electric arc welding to the broken joints upto 10 cm long of the form as required including painting to match the existing surface as directed.

Cleaning the wooden/steel surfaces thoroughly by using abrassive cloth and applying putty as required as per trade practice and apply good quality of polishing to the wooden top & painting with synthetic enamaled Olive Green in a glossy finish shade on steel surfaces as per specified and directed.

STOOL STEEL (WITH BACK REST) TYPE II 300X300X510MM : DRAWING No : HFD - 2007 M&L for repair/replacement of following parts of stool steel (with back rest ) type II all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Removing of u/s cushioned seat & back and S&F new cushioned seat & back complete (including stiffeners) of required shape & size as per drawing and fix with accurate machine screw as per drawing.

Replacement of upholstery of seat & back with Fabric best quality as approved by GE (Rate of fabric not less than Rs 250 per RM).

Removing u/s rear leg and S&F new MS tubular ( 22ø ) legs of CRCA quality & 18 SWG with best quality rubber shoes, of required size as per drawings including two coats of synthetic enamel black paint 1st grade over a coat of red oxide primer complete all as per specified and directed.

All as per item no 19.05 but front leg of of stool steel.

Removing of u/s / broken MS ring and S&F new MS ring CRCA quality of 22mm dia ring as per drg.

Taking down u/s MS stiffener and S&F new MS stiffners of size350mmx25mmx5mm as per drg.

Electric arc welding to the broken joints upto 10 cm long of stool steel with back rest type II as required including necessary painting to match the existing surfaces all as directed.

Removing u/s hard rubber shoes and S&F new hard rubber shoes as per drg

Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and welding where required than two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete.

SHOE RACK STEEL:(DRAWING No: E6/MAP/02® : M&L for replacement of following unserviceable parts of shoe rack Steel all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Removing unserviceable side frame and S&F new side frame of 25mm dia MS pipe (18 gauge) as per existing shape and size.

Removing unserviceable main frame work and S&F new main frame work of 19mm dia MS pipe (18 gauge), horizontal MS rod of 3mm dia (3 Nos equidistant) and verticle MS rod of 3mm dia (9 Nos equidistant) welded to side frame as per existing shape and size.

Electric arc welding to the broken joints upto 10 cm long of steel shoe rack as required including necessary painting to match the existing surfaces all as directed.

Removing unserviceable Rubber shoe and S&F new rubber shoe as per existing shape and size.

Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete.

EXAMINATION COUCH : DRG NO FD-122 (M) :- M&L for replacement of following unserviceable parts of Examination couch all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Taking down u/s drawer and S&F new Drawer with Aluminium handle as per drawing complete all as specified and directed.

All as per item no 21.01 but sliding tray of examination couch.

Replacement of upholstery of examination couch with Fabric best quality as approved by GE (Rate of fabric not less than Rs 300 per RM).

Taking down u/s top and S&F new top complete of required shape & size as per drawing, including copper plated steel springs, cotton layers, teak wood plank, upholstery as approved by GE, rest all as per drawing complete (Rate of fabric not less than Rs 300 per RM all as per specified and directed).

Electric arc welding to the broken joints upto 10 cm long of examiantion couch as required including necessary painting to match the existing surfaces all as directed.

Removing unserviceable Rubber shoe and S&F new rubber shoe as per existing shape and size.

Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel olive green paint of 1st grade over a coat of red oxide primer up to a glossy finish complete.

CABINET FILING STEEL GODREJ : DRG NO- TP/ FD-397/ HFD-2038 : M&L for repair/ replacement of following unserviceable parts of cabinet steel all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Taking down u/s locking device and S&F new Locking device of required shape & size complete as per drawing complete all as specified and directed. Make: Godrej, Harrison, Link.

Taking down u/s Drawer and S&F new Drawer with sliding channel, rubber supports & handle as per drawing all as specified and directed.

Taking down u/s sliding channel and S&F new sliding channel with rubber supports as per drawing all as specified and directed.

Taking down u/s drawer stopper and S&F new MS stopper of required shape & size as per drawing all as specified and directed.

Taking down u/s rubber support and S&F new rubber supports for drawer of approved quality as per drawing all as specified and directed.

Electric arc welding to the broken joints upto 10 cm long as required including necessary painting to match the existing surfaces all as directed.

Removing of dents and bends of Cabinet filing steel wherever required including welding where required, cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing shade 1st grade (Godrej pattern) over a coat of red oxide primer to internal surfaces including drawers and external surfaces up to a glossy finish complete all as per specified and directed.

TABLE WRITNG SINGLE DRAWER / TABLE WRITING GODREJ : DRG NO- TP : M&L for repair, replacement of following unserviceable parts of table writing all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Table top of size 1215X630mm made of 18 mm thick MDF Prelaminated board of exterior grade, including PVC edging all around the top with the help of suitable m/c screws complete all as specified and directed.

Drawer made out of 1 mm thick mild steel black sheet size & shape required and shown on drawings including two coats of synthetic enamel paint of existing shade 1st grade over a coat of red oxide primer complete all as specified and directed.

Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved.

Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel paint of existing shade 1st grade over a coat of red oxide primer complete.

Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over 1st grade over a coat of red oxide primer complete.

Hard rubber shoes of best quality as approved.

Hard plastic handle of drawer of best quality.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete.

Removing of dents and bends of table writing wherever required including welding , cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing shade (Godrej pattern) 1st grade over a coat of red oxide primer to external surfaces up to a glossy finish complete all as per specified and directed.

RACK STEEL SHELVING 6'-3"x36"x18" / 2475x900x500mm : DRG- TP: M&L for repair, replacement of following unserviceable parts of Rack steel shelving all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Taking down u/s shelf and S&F new shelf made of 1 mm thick MS sheet of shape & size as per drawing complete all as per specified and directed.

Taking down u/s tringular sheet and S&F new tringular sheet of 75x75x3mm thick F.I. cut to shape as per drawing all as specified and directed.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete.

Removing of dents and bends of rack steel wherever required including welding , cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel olive green paint of 1st grade over a coat of red oxide primer to all surfaces up to a glossy finish complete all as per specified and directed.

RACK ADJUSTABLE STEEL 6 TIER WITH/WITHOUT CLOSED TYPE : DRG: FD-106(M)/ FD-1038: M&L for repair, replacement of following unserviceable parts of Rack steel 6 tier all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Taking down u/s shelf and S&F new shelf made of 1 mm thick MS sheet of rack steel 6 tier of shape & size as per drawing complete as per specified and directed.

Taking down u/s tringular sheet and S&F new tringular sheet of 75x75x3mm thick F.I. cut to shape as per drawing all as specified and directed.

Electric Arc welding upto 10 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete.

Removing of dents and bends of rack steel 6 tier wherever required including welding , cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel olive green paint of 1st grade over a coat of red oxide primer to all surfaces(including inner surfaces) up to a glossy finish complete all as per specified and directed.

All as per item no 25.04 but rack steel 6 tier closed type.

CHAIR VIP CUSHION : DRG- FD 358 :- M&L for repair/replacement of following parts of chair vip cushion all as specified and shown on drawings. The fixing and finishing shall be done in accordance with standard workmanship/specifications and as directed.

Removing u/s upholstery of seat & back and S&F new leatherite upholstery of seat & back complete of chair vip cushion as approved as per existing shape & size and drawing (Rate of fabric not less than Rs 300 per RM).

All as per item no 26.01 but complete seat & back of chair vip cusion.

Preparation of surfaces by coarse sand paper/grinder of chair vip cusion and applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of melamine polish on exposed surface to achieve high glossy finish, complete all as specified and directed.

TABLE COMPUTER : DRG: FD/E6/MAP/03, TP: M&L for repair, replacement of following unserviceable parts of table computer all as specified and shown on drawing and as directed. All fixing and finishing, etc shall be done in accordance with the standard workmanship, drawings and as directed.

Table top of size 910mmx570mm made of 18 mm thick MDF Prelaminated board of exterior grade, including PVC edging all around the top with the help of suitable m/c screws complete all as specified and directed.

Drawer (including telescopic channels & Knob) made of 18 mm TH MDF prelaminated board of exterior grade and 75 mm deep on telescopic channels.

All as per item no 27.01 but pull out tray (including telescopic channel) of required shape & size complete of table computer as per drawing..

All as per item no 27.01 but kye board tray of size 450mmx480mm with telescopic channel complete.

All as per item no 27.01 but shelf of table computer of required shape & size as per drawing.

Legs with nylon buffers as per drawing complete.

Removing of dents and bends wherever required including welding where required , cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel black paint of 1st grade over a coat of red oxide primer to all surfaces up to a glossy finish complete all as per specified and directed.

Notes:-

F.M. KHAN SONS