PERIODICAL SERVICES AND MISC REPAIR WORKS IN OMQ, OTM ACCN AND OFFR MESS AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

M & L for preparation of old decorated surfaces of walls, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.

M & L for preparation of old decorated surfaces of ceilings, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on ceilings complete all as specified and directed.

M & L for preparation of old distempered/ decorated surfaces of walls incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparation of old distempered/ decorated surfaces of ceilings incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for complete removal of existing treatment on old decorated surfaces of walls incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces wall and application of 3mm thick wall care putty complete all as specified and directed.

M&L preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed.

M&L complete removal of existing treatment on old decorated surfaces of walls by brooming down scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified.

M & L for preparation of old decorated by brooming down scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts on wall and applying one coats of cement base paint complete all as specified

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. all specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement)including admixture of SBR (cost of SBR including) as per manufacture including fixing of scaffolding/padding if required upto 9mtr height complete all as specified and directed .

M & L for cement plaster 5 mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and directed.

M & L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

M & L Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and welding of garage door ,repair to iron door and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete.

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping/ levelling at the destination all as Specified.

M&L 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded aggregate) in hard standing/path in aincluding spike rolling to surface and making impression of expanded metal whilst the concrete is green

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, including finishing the surface even and fair complete.

Taking down CPVC water tubing and connection 20mm dia bore and removal from site.

Taking down CPVC water tubing and connection 25mm dia bore and removal from site.

Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified. Note:- Cutting chease wherever required will be measured & paid separately.

Supply and fix 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified. Note:- Cutting chease wherever required will be measured & paid separately.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete.

M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land all as directed.

M&L for providing screed bed of 15mm thick in CM 1:4 for laying floor finish, mixed with WPC @3% by weight of cement on fair faces of concrete surfaces without using extra cement as in roof complete all as specified and directed. Note:- WPC shall be measured & paid separately.

Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg/Sqm with brush/roller laying of 3 mm thick APP based polymer modified memrane reinforced with polyester non-woven fabric with white mineral gravel finish on upper side of membrane(Wt not less than 150 gms/sqm laid on primed surface by forced application and sealing all the over laps 150mm in length side and 100 mm in width side of membrane laid with torch application as per manufacturer's instructions complete all as specified and as directed by Engineer in Charge.

Supply only Integral waterproofing compound complete all as specified and directed

M & L for Providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) of average thickness 50 mm in adequate slope on roof surfaces for padding to achieve the 1:40 slope complete all as specified and as directed.

Demolition of cement concrete any description and in any position not otherwise specially provided for all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F 4 mm thick glass sheet ordinary quality and glazing with oil putty/rubber beeding/ M seal etc n.exc 0.50 Sqm in each pane fixed to wooden/metalic frame complete all as specified and directed.

M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface,cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding,formwork etc up to 9 Mtr heigh and applying 10 mm thick rendring in cement mortar 1:3 , finishing the surface even & smooth with out using extra cement complete all as specified. NOTE: Reinft will be paid separately.

M&L MS steel TMT bars 10mm dia and over , cut to length ,bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level, including removal of debries to outside MOD land.

M&L for 75mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate, as in sub base to floors and paving, lean concrete to fdn etc all complete all as directed.

Material & Labour for machine pressed precast concrete interlocking paver block with grey cement and pigment of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer chemical coating on top surface, over white cement and pigment all as specified and directed.

Labour only for laying of old PCC interlocking paver block of any descreption laid & bedded dry. Note:- Old PCC interlocking paver block retrived shall be used.

M&L for Filling of dry Sand as in screed bed for PCC interlocking paver block including spreading leveling, and well ramming complete all as specified.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs and removing to store

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs and removing to store

Supply and fix in repair 500 litres capacity , rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Supply and fix in repair 1000 litres capacity , rotational moulded, polythene water storage tank with cover (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Supply & fix in repair Nipple suitable for HDPE water tank (Minimum weight of 25mm- 65gms)inlet /outlet suitable for 25 mm bore pipe all as directed by Engineer in charge.

S& F in repair sintex cover for over head tank of any capacity including all fittings complete

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete and all as specified.

Removing building materials (Cement concrete any description, bricks, stone slab and tiles, bricks dust or mud etc) to any distance beyond MD land, the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations complete all as specified and directed.

S t modi (BID ID -3378324)

R.H.ENTERPRISE (BID ID -3370516)

SohanandCompany (BID ID -3379641)