NGP-10 Taka Year 2025-26. Construction of Smashan Building with Gas based Cremation Furnace System at Village Khergam Ta. Chikhli Dist.Navsari.(1st Re-invite)

Name of Work:- NGP-10% Year 2025-26. Construction of Smashan Building with Gas based Cremation Furnace

System at Village Khergam Ta. Chikhli Dist.Navsari.

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

1 Excavation for foundation upto 1.5 m depth including sorting 69.88 Cum. 261.82

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(C) Hard Murrum

2 Excavation for foundation for depth from 1.5 m to 3.0 m 61.70 Cum. 292.87

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (D) Soft

rock not requiring Blasting

3 Filling available excavated earth (excluding rock in trenches 65.79 Cum. 133.66

plinth, slides of foundations etc. in layers not exceeding

cm in depth consolidating each deposited layer by ramming

4 Filling in foundation and plinth with murrum or selected soil 48.76 Cum. 296.30

in layers of 20cm thickness including watering ramming and

consolidating etc. complete

5 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 22.02 Cum. 3713.67

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth (more than 10 ton)

6 Providing and laying controlled cement concrete M.250 and 19.84 Cum. 4533.59

curing complete the cost of formwork but excluding

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete.

(more than 10 ton)side and disposing off remaining stuff.

7 Providing and laying controlled cement concrete M-250 and 4.37 Cum. 8795.02

curing complete including the cost of form work but

excluding cost of reinforcement for reinforced concrete

work for Column upto plinth l

8 Providing and laying controlled cement concrete M.250 and 10.39 Cum. 6328.76

curing complete the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level. (more than

9 Brick work using common burnt clay building brick having 3.10 Cum. 4121.55

crushing strength not less than 35 kg/sq. cm. in foundation

and plinth in cement mortar 1:6 ( 1 Cement: 6 fine sand) (B)

10 Providng TMT bars renforcement of FE 500/500D for R.C.C. 10207.41 kg 77.29

work including bending binding and placing in position

complete for all floor.

11 Providing and laying controlled cement concrete M.200 and 5.86 Cum. 8755.36

curing complete the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level. (more than

12 Providing and laying controlled cement concrete M.200 and 1.03 Cum. 8796.09

curing complete the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level. (more than

13 Providing and laying controlled cement concrete M.200 and 10.60 Cum. 6623.58

curing complete the cost of formwork but excluding

reinforcement for reinforced concrete work in (C) Slabs,

landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (more than 10 ton)

14 Providing laying controlled cement concrete M 200 R.C.C 0.82 Cum. 9539.56

lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

15 Providing and laying controlled cement concrete M.200 and 11.91 Cum. 6754.88

curing complete the cost of formwork but excluding

reinforcement for reinforced concrete work in (C) Slabs,

landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (more than 10 ton)

16 Brick work using common burnt clay building brick having 33.63 Cum. 4403.40

crushing strength not less than 35 kg/sq. cm. in super

structure above plinth level up to floor two level in cement

mortar 1:6 ( 1 Cement: 6 fine sand) (B) Convention for G.F

17 Brick work using common burnt clay building brick having 7.19 Cum. 4444.59

crushing strength not less than 35 kg/sq. cm. in super

structure above plinth level up to floor two level in cement

mortar 1:6 ( 1 Cement: 6 fine sand) (B) Convention for F.F

18 Half brick masonry in common brunt clay building bricks 10.43 Sqmt 734.30

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of

6mm Mild steel round bars after every three course

embedded in Cement Mortar in foundation and plinth (B)

19 Providing and laying Machine cut, Free edges, Machine 22.32 Sqmt 2532.68

polished Granite stone slab 18 mm thick Single Piece For

doors and Windows Cill and Jambs Cladding as per design

including Full moulded Round front edge and 1 cm nosing

and laid on 20 mm thick cement mortar 1:6 (1 cement :

coarse sand) and jointed with gray cement slurry including

rubbing and polishing etc. complete

20 Providing and fixing flush door both sides laminated 1.89 Sqmt 4501.57

andshutter fabricated from 35 mm thick solid core malemine

faced three layered pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic resin having

stamped IS 12823 grade I type II including three coats of

lacquer polishing to exposed wooden surfaces and Stainless

steel decorative type designs fixtures / fastening 2Nos.

Handles, 2Nos. Aldropes, towerbolt etc. as per architectural

detailed drawing and as directed by engineer in charge..

21 Providing and fixing window having extruded aluminum 0.54 Sqmt 1591.89

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc

22 Providing & fixing M.S. grill / M.S. door of required pattern to 417.82 kg 163.62

wooden frames of windows/ brick masonry with necessary

M.S. angle, M.S. pipe, M.S. flats and other structural steel at

required spacing and frame alround square or round bars

with round headed bolts and nuts or by screws (Plain Grills)

Including primer coat of approved quality and two coats of oil

paintings etc. complete as directed.

23 Providing 15mm thick cement plaster in single coat on Rough 233.07 Sqmt 225.51

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)

24 Providing 15mm thick cement plaster in single coat on Rough 34.63 Sqmt 252.90

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)

25 Providing 10mm thick cement plaster in single coat on 99.62 Sqmt 194.53

brick/conceret wall for interior plastering finished even and

smooth (ii) cement mortar 1:3(1 cement:3 sand) and mala

trovel finished etc. complete.

26 20 mm thick sand faced cement plaster with on wall upto all 256.52 Sqmt 339.15

height above ground level consisting 12 mm thick backing

coat of c.m. 1:3 (1 cement : 3 sand ) and 8 mm thick finishing

coat of cm 1:1 (1 cement : 1 sand) etc. complete.all height

27 Providing throating or plaster drip and moulding to R.C.C. 26.86 Rmt 43.22

28 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 103.49 Sqmt 1432.78

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for

29 Providing and laying coloured glazed tiles of the size 300 mm 161.70 Sqmt 1477.25

x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,

risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white cement

30 Providing Green Marble for Stair Toppa & Riser storage cabat 28.96 Sqmt 2536.11

partion,self complate with material like

cement,marble,camical etc complate including all Labour

work complate as per drawing and direction by Site Engineer

31 Providing and laying broken chine mosaic flooring for terrace 68.72 Sqmt 765.98

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered

to bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic acid etc. as

32 (A) Providing and laying internal cement based water 68.72 Sqmt 898.50

proofing treatment including preparation of surface as

required for tretment of roofs, balconies, terrace,etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water

proofing compound conforming to IS : 3645 over the R.C.C.

slab including cleaning the surface before tretment.

(b) Laying cement concrete using brocken bricks/brickbats

mm to 100 mm size with 50% of cement mortar 1:5 admixed

with proper water proofing compound confirming to IS :

over 20 mm thick layer of cement mortar of mix 1:5 admixed

with proprietary water proofing compound confirming to IS :

2645 to required slope and treting simillary the adjoining

walls up to 300 mm height including of junction of walls and

(c) After two days of proper curing applying a second coat of

cement slurry admixed with proprietary water proofing

compound confirming to IS :

(d) Finishing the surface with 20 mm thick joinless cement

mortar of mix 1:4 admixed with proprietary water proofing

compound confirming to IS : 2645. and finally finishing the

surface with neat cement slurry and making of 300 x 300 mm

(e) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curring and for final

test. all above operations to be done in order and as directed

and specified by the Eng-in-charge.

33 Finishing wall with water proofing cement paint of on wall 256.52 Sqmt 117.41

surface ( Two coats) to give an approved brand manufacture

and of requred shape even shade after throughtly brushing of

loose powered materials.

34 Wall painting (two coats) with plastic emulsion paint of 332.70 Sqmt 127.19

approved brand and manufacture with on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth along ceilings and sloping

35 Providing & laying and jointing in true line and level 40 mm 30.00 Rmt 447.73

dia UPVC pipe (SCH-40) line including fitting make or

equivalent as approved by engineer in charge the pipe shole

be fixed on wall with the hel of clam at every two mtr center

to center or shall be conseled as direct including necessesary

fitting etc including testing of pipe and jointes and fixin the

sam with adhesive solvent including cost of matarial (A)

36 Providing & laying and jointing in true line and level 25 mm 20.00 Rmt 91.84

dia UPVC pipe (SCH-40) line including fitting make or

equivalent as approved by engineer in charge the pipe shole

be fixed on wall with the hel of clam at every two mtr center

to center or shall be conseled as direct including necessesary

fitting etc including testing of pipe and jointes and fixin the

sam with adhesive solvent including cost of matarial (A)

37 Providing & laying and jointing in true line and level 15 mm 20.00 Rmt 72.65

dia UPVC pipe (SCH-40) line including fitting make or

equivalent as approved by engineer in charge the pipe shole

be fixed on wall with the hel of clam at every two mtr center

to center or shall be conseled as direct including necessesary

fitting etc including testing of pipe and jointes and fixin the

sam with adhesive solvent including cost of matarial (A)

38 Providing and fixing wash down water closet (European type, 2.00 Nos 3998.03

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

inculding Providing and fixing plastic seat and cover for wash

down water closer with C.P. brass hinges and rubber buffers.

(B) Black plastic seal and cover inculding of Providing and

fixing 12.5 Litres low level flushing cistern with a pair, of C.I.

or Mild brackets, complete with fittings such as lead valve

less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm dia.

porcelain enamelled flush bend including cutting holes in

walls and making good the same connecting the flush bend

with cistern and closet (overflow pipe to be measured and

paid for separately)(A) Vitreous China (I) In white colour . (A)

vitreous China Pattern :(i) in white colour

39 Providing and fixing washbasin with single hole for pillar tap 2.00 Nos 1970.62

with C.I. or M.S. brackets painted white including sutting

holes and making good the Providing and fixing C.P. brass

waste for washbasin or sink. (A) 32mmdia.,Providing and

fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.,Providing

and fixing brass screw down stop tap.(A) 15mm dia..(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

40 Providing and fixing Urinal of approved quality inclding 3.00 Nos 1062.18

connection the urinal the urinal with waste pipe tap etc

complete (A) white earthnware flat back or corner type size

430mm x 260mm x 3500 mm including fixing CP Brass waste

pipe white earthen ware flate back or corner type size 130 x

41 Providing and fixing screw down bib taps of following size.(B) 2.00 Nos 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia

42 Providing and fixing chromium plated brass half trun flush 2.00 Nos 263.72

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

43 Providing and fixing ball cock of approved. quality as 2.00 Nos 189.50

directed.(A) Copper Metal (ii) 50mm dia.

44 Providing and fixing Angle cock with Wall flange crome 3.00 Nos 858.50

finished brass (i) 15mm dia.

45 providing and fixing cast iron(spun) nanhi trap of the 2.00 Nos 629.39

following nominal dia of self cleaning design with C L screwed

down of hinged grating including cost of cutting and making

good the walls floos 100 mm inlet and 50 mm out let etc

46 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 Nos 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R type

47 providing and fixing cast iron spigot and socket soil waste and 20.00 Rmt 741.01

ventilating pipe of the following nominal size 75 mm dia.

48 providing and fixing cast iron spigot and socket soil waste and 38.00 Rmt 892.39

ventilating pipe of the following nominal size 100 mm dia.

49 providing and fixing in position cowl vent to pipe (II) 100mm 4.00 Nos 505.18

50 Supplying and Fixing Z clamp with type G.I.Brackets for 6.00 Nos 222.20

SWR/RWR/Water supply Plumbing all type of dia pipe with GI

Clamp and Nacessary Fastenrs

51 Providing and fixing G.I. Rain water spout of 50mm dia. and 4.80 Each 101.91

52 Constructing brick masonry chamber for underground C.I. 2.00 Nos 2932.93

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

53 Constion of Khar kuva of external dimentions 2.9 x 1.98 x 1.5 1.00 Nos 37310.41

mt. depth with 1:3:6 PCC along with 0.23 mt thk. brickwork,

Top RCC Slab of 2.6 x 1.7 mt. along with 15 mm plaster on

inside faces with nacessary CI MH, Inlet outlet arrengments,

nos of CI Inspection chamber & provideing a soak pit of

cmt Volumn. The Soakpit shall be filled with brick bats with

dry masonary work upto top for 45 cm and it should be

coverd with Man Hole. The entire work is to be executed

according to the nstructions, given by the Engineer Incharge.

54 Providing erecting and fixing double coated ISI water tank of 2000.00 liter 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace

55 Providing and fixing in position 300 mm high, 150 mm wide 30.00 Nos 656.50

English/Gujarati letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

56 Providing and fixing marble slab including engraving and 1.00 Nos 1012.65

painting complete. (i) Size 75cm x 60cm x 4cm.

57 Steel work, welded in built up sections framed work including 6.30 Qui 9916.49

cutting, hoisting, fixing in position and applying a priming

coat of red lead paint. (D) In trussses and trussed purlins,

upto 25 M. span and 15 M. ovarall height.

58 Providing corrugated G.I. sheet of class-3 roofing fixed with 37.06 Sqmt 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

59 Providing Plinth Protection to Building including excavation in 167.80 Sqmt 1437.94

ordinary soil and laying cement concrete 1:3:6 using stone

aggregates of 40mm nominal size in foundation layer

mm thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M200 pneumatic

compressed by mechanically pressed and as per approved

design including 75mm Sand layer for levelling and filling

the joint with sand in proper line and level etc. complete,

Including Providing and fixing pre-cast concrete kerb stone of

grey cement based concrete block 30cm length, 30cm height

and 15cm thick of M250 grade concrete as per approved

design and including excavation for fixing in proper line and

level, filling the joint with C:M 1:3 (1cement:3 fine sand) etc.

60 Chairs Providing and supplying Visitor or Guest chair the 50.00 Nos 370.68

seat & back are made of 12mm thick hot-pressed plywood

upholstered with changeable fabric upholstery covers (as per

requirement) and molded PU foam, together with molded

seat & back covers. The back foam should be designed with

contoured lumber support for extra comfort. The size of chair

45cm x 38cm (Back side) and 45cm x 43cm (seat size). The PU

foam should be molded with density =45 ± 2 kg/m3. The

armrests with Leg made with Powder coated MS structure as

per architect selection. The Seat and back fixed with MS

structure with required necessary hardware. As per

Instruction of EIC & User Department.

61 Supplying & Fixing RCC Precast Benches of RCC 1:2:4 Finished 8.00 Nos 4848.00

with china Mosaic tiles chips and etc.,

62 Providing and fixing in position collapsible steel shutters with 2.40 Qui 5980.75

vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of T_rin

40x 40 x 6 mm with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

63 Supply and Installation with Testing and Commissioning of 1.00 Quo. 3500000.00

Gas Based Cremation Furnace System Including Burners,

Trolley, Hydraulic Jack, Fresh air blower, Locking system,

Doors assembly and doors mechanism, any manufacturing

defect, refractory lining, Control panel etc