Loading…
Loading…
Tender Value
₹40.8 L
EMD Value
₹81,700
Closing Date
8 Jul 2026, 9:30 pmDue today
Rural Development and Panchayat Raj Department
Construction of Bus Stand at Belagur Village Under Belagur Grama Panchayt in Hosadurga taluk Of Chitradruga District
RDPR/2026-27/BD/WORK_INDENT27421
RDPR/2026-27/BD/WORK_INDENT27421
Open
Buildings
RDPR Division Office Chitradurga
8 documents required · 8 mandatory
Details of Name and address with contact no
EMD Details.
2.1 P.W.D Registration Certificate Class III and above.
3.2.b Satisfactory completed as prime contractor at least one similar work of Value not less Rs. 20.42 lakhs in the last years Period 2021-2022,2022-23,2023-24,2024-25 and 2025-26 duly signed by not below the rank of Executive Engineer.
Achieved in at least any two financial years a minimum financial turnover in all classes of Civil Engineering construction works only of Rs.40.85 Lakhs. UDIN Number should be compulsorily mentioned in Turnover Certificate. From 2021-22 to 2025-26. with UDIN Number is compulsory.
Existing commitments and ongoing works details
Information on works for which tenders have been submitted and works which yet to be completed.
Assessed available tender capacity- (AxNx2.5 - B) Where A - Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B -Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 6 months (period of completion of the works for which Tenders are invited)
Details of Name and address with contact no
Details of Name and address with contact no
Details of Name and address with contact no
Details of Name and address with contact no
₹1,030
₹81,700
21 Jun 2026
21 Jun 2026
9 Jul 2026
7 Jul 2026
Construction of Bus Stand at Belagur Village Under Belagur Grama Panchayt in Hosadurga taluk Of Chitradruga District
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) incl...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking. laping/welding joints, tying ...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ...
Distempering with oil bound washable distemper of approved brand and manufacture to Sqm give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer afte...
Finishing walls with Acrylic Smooth exterior paint of required shade: New work Two coat applied 1.67L10 m2 over and including priming coat of exterior primer applied 2.20 kg 10 m3 with paint of approv...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 g/m...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed, including cos...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(VOL...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Providing & fixing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins (VOL-II, Item No-7.13, Pg No-22) with all lead ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pi...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes. shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of granular Sub-base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing my mix in place method with front end loader at OMC and com...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm. aggregate cement ra...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectori...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 madeof Class B Type IV retro reflective sheeting fixed over 2 mmthick aluminium sheeting vide...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Point wiring using Copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi stran...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. (PWD- Part III ,...
Concealed Conduit System: Supplying heavy gauge PVC conduit pipe .....mm dia ........mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runnin...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multisand Copper wire with low conductor resistance single core cable in open or concealed system of wiring with specifie...
Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3pha...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short ciruit breaking cap...
Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low 3mg Mercury content & below 40% glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 135...
Fixing all types and all capacities fluorescent/false ceiling/spot light/CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of roun...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (CSR 23-24, VOL-VI, P-III PWD Elec,...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2 bid belaguru 27421.doc
Tender Document • 0.46 MB
Download all tender documents and submit your bid