Construction of 01 Clasroom , 03 MDM , 03 GTB ,02 BTB and 05 MULTIPURPOSE SHED at various Primary School in Garudeshwar Taluka NARMADA District

No. Amount

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not

exceeding 20cm in depth consolidating each deposited

layer by ramming and watering.

3 layers of 20 cm. thickness inculding watering, ramming and 130.83 304.6 Cmt.

consolidation etc. complete.

Brick work using common burnt clay building bricks

‐ having

‐ strength not less than 35 kg./Sq.Cm. in

foundationand plinth in Cement Mortar 1:6. (1 Cement :

finesand)(C) Fly Ash Bricks

Masonry work with aerated light weight concrete Blocks of

size 60cm x 23cm x 23cm or any other approved size,

having crushing strength @ 35 kg/sqcm Fixing with ready-

mixed mortar ('Fixoblock'of M/s Ultratech cement

5 Ltd./Rapid Fix/Lion) having tensile adhision strength >0.8 20.88 4261.38 Cmt.

N/mm2 and compressive strength of >2N/mm2.The mortar

is to be fixed in a thickness of 3mm to 5mm on the clean

and leveled surface of blockmasonry using proper trowel.

For all floor and lead and lift For superstructure.

Brick work using common burnt clay‐ building bricks having

‐ strength not less than 35 kg./Sq.Cm. in Super

Structure in Cement Mortar 1:6. (1 Cement :

finesand)(C) Fly Ash Bricks

Half brick in common brunt clay building bricks having

crushing strength not less than 35 Kg/sq.cm in cement

mortar 1:4 (1 cement : 4 coarse sand) (C) Fly Ash Bricks in

super structure including curing etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1 Cement :4

Coarse sand :8 hand brocken stone aggregates of 40mm

nominal size) in plinth and curing complete including cost

of formwork. (A) Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement :

5- Coarse sand : 10- hand broken stone aggregates 40 mm

nominal size) and curing complete including cost of

formwork in (A) Foundation and Plinth

Providing & laying Cement Concrete 1:2:4 (1 Cement :

Coarse Sand : 4 graded stone aggregate 20 mm nominal

10 size) & curing complete including cost of form work (A) 9.82 3591.22 Cmt.

Foundation and Plinth -Below Tie beam, Plinth protection &

surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (A) 40mm thick.

Providing and laying controlled cement concrete M.150 for

curing complete including cost of formwork and

12 excluding cost of reinforcement for reinforced concrete 4.50 4043.54 Cmt.

work in (A) Foundations, footings,Base of columns

and Mass concrete (Cement Level 290 Kg)

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork and

13 Excluding the cost of reinforcement for reinforced concrete 38.91 4591.41 Cmt.

work in (A) Foundations, footings, Base of columns and

Mass concrete.(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork and

Excluding the cost of reinforcement for reinforced concrete

work in Plinth Beams. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

15 excluding the cost of reinforcement for reinforced concrete 21.14 5923.82 Cmt.

work in (C) Coping Vertical and horizontal for all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (C) Chajja all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (C) Lintels all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (C) Beams all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork and

19 excluding the cost of reinforcement for reinforced concrete 3.04 6970.52 Cmt.

work in (D) Columns, Pillars posts and struts all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

20 excluding the cost of reinforcement for reinforced concrete 9.48 6909.68 Cmt.

work in (D) Columns, Pillars posts and struts all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (C) Slab all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

22 excluding the cost of reinforcement for reinforced concrete 3.10 7356.37 Cmt.

work in (E) Staircases including lending all floor (Cement

Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement

(ISI mark) Confirmed to IS-1786 for R.C.C.work including

Cutting, bending, binding and placing in position etc.

complete.For all floors

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior

plastering in cement mortar 1:4(1 cement 4 sand) watering,

curing etc. complete.For all floors

Providing 15mm thick cement plaster in single coat on

rough or fair side of single or half brick wall for interior

plastering in cement mortar 1:4(1 cement 4 sand) watering,

curing etc. complete.For all floors

20mm thick sand faced cement plaster on walls above

ground level consisting of 12mm thick backing coat of

26 cement mortar 1:3(1 cement 3 sand) and 8mm thick 366.31 353.98 Smt

finishing coat of cement mortar 1:1(1 cement 1 sand)

watering, curing etc.complete for any Height.

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

Finishing walls with 100% Premium acrylic emulsion paint

having VOC less than 50 gm/litre and UV resistance as per

IS 15489:2004, Alkali & fungal resistance, dirt resistance

exterior paint of required shade (Company Depot Tinted)

27 with silicon additives. New work (Two or more coats 623.88 183.06 Smt

applied @ 1.43 litre/ 10sqm. Over and including priming

coat of exterior primer applied @ 0.90 litre/10 sqm, Item

Includes two coat of primar and putty with scafolding at all

level of work. As per Approval of Engineer Incharge.

Distempeing (Two coats) with oil bound washable

distemper having VOC content les than 50 grm/liter of

approved brand and manufacture and of required shade on

wall surfaces to give an even shade, over and including a

28 priming coat and putty with alkali resistance primer of 871.71 77.3 Smt

approved brand after thoroughly brushing the surface and

other foreign matter and also including preparing the

surface even and sand parpered smooth As per Approval

of Engineer Incharge

Painting two coats (Including priming coat)having Low VOC

content on new wood and wood based surface with enamel

paint,Primar coat, interior to give an even shade including

cleaning the surface of all dirt, dust,oil,grease and other

foreign matter sand papering,knotting and stopping.(As

directed by Engineer in charge)

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

24'' in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement

Providing and laying 25mm thick polished Kota stone

flooring/staircase treads (two pieces with three groves in

front of steps) over 20mm (average) thcik base of cement

mortar 1:6 (1 cement 6 coarse sand) laid over and jointed

with grey cement slurry including curing, rubbing, and

polishing etc. complete.

Providing & fixing average 25mm thick Double polished

Kota stones for shelves in cup board, seating plat form,

including curing, rubbing, polishing etc. complete. (As

directed by Engineer in charge)

Providing & Fixing 25mm thick double polished vertical

Kotah stone for (partion)urinal as par drawing including

round edge moulding etc comp. (As directed by Engineer

in charge)

providing & laying cement water proofing of average 60mm

thick for terrace for all floors using first layer cement mortar

(1:3) over an exsisting surface second layer of arranging

brick bats acording to slop adding suitable chemical to

34 make water tieght & again third layer of cement mortar 1:3 10.00 354.54 Smt

on above including adding water proffing compound and

finishing top with net cement slury using cement @

kg/sq mt. making any patterns and design on the top etc.

complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain

& curve surface 12mm to 20mm of broken piece of ceramic

tiles or Glazed tiles ( one or more colour as directed by

Engg. In charge ) to be laid over cement mortar bedding of

CM 1:3 to plain or and slopes and to be tempered to bring

mortar cream up to and colour pigment including rounding

of junctions and extending them pu to 15cms along the wall

and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and

oxilic acid using 1 kg / 1 bag of water proofing materials.

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

Providing cement vata (10 cm X 10 cm size) quartar round

in cement mortar 1:1 including neat cement finishing,

watering etc. complete Respectely plaster acitivity shall be

commenced only after completion of vata work.

Providing & fixing in position mild steel door with ventilation

frame 40x40x6 mm and shutter frame 35x35x5mm ,75x5

mm ms flate at lock rail,10 mm square bar in vent at10 cm

c/c coverd with corrugated ms sheet 0.6 mm thick,

including applying a priming coat of read lead paint

including cleanicn the surface of all dirt, dust and other

foreign matter (As directed by Engineer in charge&

approved drawing and design etc.)

Providing & fixing in position mild steel window with

ventilation frame 35x35x5 mm and shutter frame

25x25x5mm ,10 mm square bar grill at10 cm c/c coverd

with corrugated ms sheet 0.6 mm thick,including applying a

priming coat of read lead paint including cleanicn the

surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and

design etc.)

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like

Providing and fixing of highly durable precoated Roofing

sheets having high quality colou coating throughout the

roof and having minimum 0.6 mm thickness.The colour

coated sheet roofing fixed with galvanized iron/color

40 powder coated J or L Hooks,Bolts and nuts 8mm diameter 361.50 1098.53 Smt

with bitumen and GI limpet waher or color powder coated

limpet washer. filled with white lead complete as per

approved smaple and color as directed by engineer in

Providing ridges or hips 600mm overall in precoated GI

sheet class-3 fixed with GI j or L Hooks and nuts 8mm dia

GI Limpet and bitumen washer complete.(1) 0.60mm thick

Providing & fixing G.I rain water Spout of 65mm dia and

60cm length.

Painting of logo on front side wall as directed by Engineer

in charge and as per approved drawing.

Providing and fixing FRP frame size 100x50 mm

and 28mm thick FRP depress panel shutter having

extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade

polyurethene foam done in situ alongwith

44 embedded wooden pieces for stiffening & also 18.12 1696.73 Smt

taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings

& fastener sleeve.

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in

skirting, riser of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3 coarse sand) and jointed with

white cement slurry.

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

Providing upto floor two level precast cement concrete jali

or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded

stone aggregate 6mm nominal size) reinforced with 1.6 mm

dia. Mild steel wire including roughening,cleaning, fixing

and finishing in cement mortar 1:3 and curing complete.(E)

100mm thick

Construction of a soak well of as per the approved drawing

& design etc.in all sort of soil complete as directed and

approved by engineer incharge.( The internal In-to-in

dimension shall be considered for calculation)

Construction of a septic tank as per the approved drawing

& design etc.in all sort of soil complete as directed and

approved by engineer incharge. ( The internal In-to-in

dimension shall be considered for calculation)

Construction of ICN Chamber as peras directed and

approved by engineer incharge.

Providing and fixing screw down bib taps of following

51 size.(B) Brass chromium plated screws down Bib Tap. (i) 27.00 184.98 NO

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.

Providing & fixing urinal of Approved quality including

connecting the urinal with waste pipe, trap etc. complete

53 (A) White earthenware flat back or corner type 4.00 1861.26 NO

(including Angle cock,Waste coupling,connection pipe &

waste pipe) as approved by engineer incharge.

Providing and fixing water closet squatting pan (Indian

type W.C pan) size 580 mm (earthwork, bed concrte,

54 foot rests,Flush Cock and trap to be measured and 11.00 1478.53 NO

including paid) (A) Vitreous China (I) Long pattern white as

directed and approved by engineer incharge.

Providing erecting and fixing double coated ISI water

55 tank of required capacity each with all necessary fittings 3000.00 3.91 ltr

and connection etc. complete on terrace

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight C.I.

56 cover with frame of 300mm x 300mm size (inside) with 13.00 1279.4 NO

standard weight.(i) Square mouth traps.(B) 150mm x

100mm size P or R type

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 75 mm diameter with jali of

57 the following nominal diameter of self cleansing design 8.00 541.8 NO

with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

58 Providing & fixing 110mm dia PVC cowl vent to pipes. 3.00 19.5 NO

59 Providing & fixing UPVC ball valve(A) 25mm dia. 4.00 644.4 NO

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

Providing laying and jointing in true line and

level 15mm dia.U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall

60 with the help of clamp at every two metre C/C or 54.00 71.93 Rmt

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and

level 25mm dia.U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall

61 with the help of clamp at every two metre C/C or 90.00 90.93 Rmt

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2

working pressure PVC pipes of the following out side dia.

62 Special density complete with special flange compression 23.60 575 Rmt

type fitting,wall clips etc. including making good the wall

ceiling and floor.(G) 160 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2

working pressure PVC pipes of the following out side dia.

63 Special density complete with special flange compression 55.00 273 Rmt

type fitting,wall clips etc. including making good the wall

ceiling and floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2

working PVC pipes of the following out side dia. Special

64 density complete with special flange compression type 43.50 132 Rmt

fitting,wall clips etc. including making good the wall ceiling

and floor.(F) 75 mm dia

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden

67 box, single mounting base frame covered with textured / 5.00 281 NO

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (11) 6 Amps. Bell

Push Cat.III

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge (9) 16 Amp. SP

one way switch Cat.III

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge (10) 6/16Amp.

Universal socket Cat.III

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

71 textured/metallic /white front plate,modules erected with 1.00 1262 NO

necessary connections as directed1 no. 6A/16A universal

plug-switch combined.

3 nos. 6A Switch3 nos. 6A 5 pin Plug For Modular Type

Accessories Cat. III

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.) (A) Tube Light with

integral driver (c) 18-20 Watts, Surge - 2KV,IP-20, 4 feet

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (B) LED Lamps integral type, with PC

diffuser suitable LAMP holder(b) 5 to 8 watts Cat-lll

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

74 ceiling erected with necessary PVC fittings & Junction 145.00 26 Rmt

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (a)20 mm

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep

75 complete having 3blades with aluminium blades with , 1.00 2297.75 Each

canopy & 30 cm. down rod erected with 3 core flexible

wire with earthing.(Make shall be approved by Engineer

in charge))

Supplying & erecting Fan Hook of 10 mm M.S. Round

76 bar grouted in RCC slab with Making the site as original. 1.00 50.5 Each

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

ITEM Estimated

DESCRIPTION OF ITEM QTY SOR 2024-25 Per Unit

No. Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

78 following type of pipe to be erected in / on wall / ceiling with 1.00 163.62 Rmt

2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

79 on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 181.00 68 Rmt

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

80 on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 160.00 90 Rmt

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing

(iv)12 way

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed (ii) 40Amps. DP

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat.III