SPECIAL REPAIR TO BLDG NO P-02 (JCO MD ACCN) AT AUL UNDER AGE B/R-I AT MIL STN YOL

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete.

S&F for pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified

S&F for pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified

M&L for PCC 1:3:6, Type C0 (Using 12.5mm graded crushed stone aggregate) for filling in pressed steel frame of any size, complete all as specied and as directed

S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/ frame to match: supplied and fitted to chowkats, all as specified and directed.

S/F 35 mm thick 2nd class hard wood (Hollock Wood) glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

M&L WPC(Wood Polymer Composit) Double Prelam Door Frame(Chowkhat)solid frame of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufacture's specification & direction of engineer-in charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing.

M&L for PCC 1:3:6, Type C1 (using 20mm graded crushed stone aggregate) nominal mix as in holdfast etc, complete all as specied and as directed