8675 WORK SERVICES FOR SETTING UP OF LLLWR RADAR I LEVEL FACILITY AT AF STATION BAREILLY

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Taking down of shutters of any description area exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down of chowkhats or frames area exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling, inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site as per specification etc complete all as specified and as directed.

S&F anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions etc complete all as specified and as directed.

S&F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for partition, snap grid, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 1.00 Kg per running metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading, screws etc. complete all as specified and as directed.

S & F sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square area exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 12 mm thick perforated particle board / tiles for insulation and accoustic purpose, (60 x 60)cm size fixed with staples on snap grid as in ceiling complete all as specified and as directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

S&F mild steel, plain, black sheet 0.80mm thick but in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts Cover; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

S&F angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and as directed.

Taking down cemnent plaster on brick/concrete surface including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair face of brick/concrete work in cement mortar (1:4) surface finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 25mm thick cement concrete (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as a plinth protection etc complete all as specified and as directed.

M&L for glazed coloured cremic tiles of size (300x450)mm x 7mm thick as in vertical surface jointed in neat cement slurry and pointed in white or colour cement to match etc with and including over 10mm thick rendering with CM (1:3) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7mm thick (square / rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed with cement mortar (1:6) complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for tubes 15mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F for tubes 20mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F in repairs 15mm bore stop valves/angle valve, cast copper alloy, fancy type, chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size (580x450) mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F in repairs wash down water closet vitreous china semi pedestal pattern (Anglo Indian type) with P or S trap with and including connecting to trap and flushing pipe, white seat cover, CP jet and making good to floor etc complete all as specified and as directed.

S&F in repairs vitreous china Urinal half stall type, white with and including connecting of flushing pipe and out going pipe and making good to srface including waste pipe etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical Vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I with and including 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 142 gms) with and including taking down of old unserviceable tank complete all as specified and as directed.

S&F in repairs 10 Ltr PVC Flushing cistern low level white with inlet ball valve, foat and handle with and including brackets and PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified & directed.

M&L for provision of Antistatic polyurethane flooring system comprising as specified in Particular specification Clause 23 including repairing of crack complete all as specified and all as per manufaturer's instructions.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heacy duty) 1100 volts grade with standard aluminium conductor of size 185 Sqmm, 3.5 Core complete all as specified and directed.

Description all as per srl item No 37.00 here- in-before but conductor of size 70 Sqmm, 3.5 Core complete all as specified and as directed. Note for srl item No. 37.00 & 38.00:- Excavation, earthwork and protection of cable shall be measured and paid seperately.

M&L for Chemical Earthing with copper earth plate electrode of size (900 x 600)mm x 5 mm thick buried directly in ground, earth pit not less than 4.70 metres below normal ground level and complete size of pit shall be 1.60 m x 1.60 m x 5.10 metres, with top edge of the plate not less than 3.60 metres below normal ground level, earth plate surrounded from all sides by 20cm thick salt and charcoal dust and Magnesium sulphate filling in alternate layers of 20 cm thick up to 1.8 metres height and including connected to copper strip (32 x 6) mm (up to 7.5 Metres) by means of brazing / coppers nut-bolts, earth strip protected with 65mm bore light grade GI pipe from electrode and up to the earth test point, 20 mm bore light grade GI watering pipe, GI funnel, wire mesh, earth plate surrounded from all sides by 20 cm thick salt, charcoal dust and Magnesium sulphate filling in each alternate layers up to 1.80 m height including excavation, removal surplus soil to a distance not exc. 50 m, PCC pit of size (600x600)mm in PCC (1:3:6) type C-1, using 20 mm graded stone aggregate, RCC cover 40 mm thick in RCC (1:2:4) type B-1, using 20 mm graded stone aggregate reinforced with 8 mm dia mild steel deformed bars @ 75 mm centre to centre both ways complete all as specified and as directed. NOTE:- Additional Chemical compound if required on account to achieve earth resistance less than 1.00 ohm shall deemed to be included in the unit rate of this item.

M&L for earthing comprising of copper earth plate electrode (600 x 600)mm x 3.0mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to copper earth strip of size (20 x 3)mm by means of nut-bolts, check nuts and washers of copper all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust and common salt all around the earth plate in alternate layers minimum 150 mm (compacted thickness) in all directions with and including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover of size (450 x 450)mm in cement concrete (1:2:4), type B-1, duly reinforced with 8 mm dia mild steel TMT bars @ 100 mm both ways center to center with suitable lifting handle made of 10 mm dia mild steel round bar to lift the cover, earth pit of PCC (1:3:6) type C-1, including GI protection pipe light grade 40 mm bore including testing on completion of job complete all as specified and as directed.

M&L for earthing comprising of galvanised steel earth plate electrode (600 x 600)mm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to GI earth strip of size (32 x 6)mm by means of nut-bolts, check nuts and washers of copper all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust and common salt all around the earth plate in alternate layers minimum 150 mm (compacted thickness) in all directions with and including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover of size (450 x 450)mm in cement concrete (1:2:4), type B-1, duly reinforced with 8 mm dia mild steel TMT bars @ 100 mm both ways center to center with suitable lifting handle made of 10 mm dia mild steel round bar to lift the cover, earth pit of PCC (1:3:6) type C-1, including GI protection pipe light grade 40 mm bore including testing on completion of job complete all as specified and as directed. NOTE FOR SRL ITEM NO 39.00 TO 41.00:- If desired earth resistance (i.e. less than one ohm) is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.

S&F 40mm bore steel tubing medium grade galvanized with and including all GI fittings as required at site, laid in trenches, in surface, under floor or fixed to wall complete all as specified and as directed.

S&F 100mm bore steel tubing medium grade galvanized with and including all GI fittings as required at site, laid in trenches, in surface, under floor or fixed to wall complete all as specified and as directed.

S&F single pointed air termination copper rod 12mm dia, 300mm long with all connected accessories and PCC block in type B1 of suitable size complete all as specified and as directed.

S&F test point terminal block made of gun metal or phosphorus bronze size (75x75x25)mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screws for holding the bronze plate including fastening/ bolting the roof down conductor and earth electrode over the bronze plate with copper bolts & nuts of suitable size, providing 10mm thick fibre sheet of size (15x15)cm below the test point to avoid direct contact with wall including enclosing the test point with 1.6mm thick MS sheet front openable box duly painted complete all as specified and as directed.

S&F (20 x 3)mm size copper strip as in earth continuity conductor or main earthing lead buried in ground, fixed to wall, any other indicated situation for loop earthing and the like up to test point on necessary insulators and fastening screws, rawl plugs complete all as specified and as directed.

Supply, installation, testing and commissioning of Fire Alarm main control panel 2 loop microprocessor based addressable intelligent type and compatable with detector for communication to detectors and response indicators together with mimic diagram made on Auto CAD and pasted on Acrylic sheet with data logging facility and 2 X 16 character LDC, conforming to IS:2189 of capacity from 99 detector and 99 modules upto 200 detector and modules complete with PA based evacuation system and suitable for 415 Volts, three phase, 50 Hz having its own standby power backup supply with batteries, battery charger etc. complete. The panel shall also have an auto dialling facility and potential NO & NC contacts and a 80 watts PA amplifier. The panel shall have a capacity of not less than 4 zones. NOTE:- The complete job includes all type of control, connected wiring, addressable connections wire of suitable type as required for system (2-conductor cable, 3-conductor cable, networking cable, tripping cable, security cable, alarming wiring etc. upto each smoke cum heat detectors, MCP, Hooters etc. as required for the complete working of the whole fire alarm system as single unit. The PVC copper wiring shall as per standard norms of Fire saftey i.e. FLPR rated PVC jackets cables of required sizes. Make:- Apollo / Advanced (UK) / AN Exflame Fire Protection Pvt Ltd.

Supply, installation, testing and commissioning of Smoke cum Heat Detectors complying with and type certified to EN-45 addressable type micro processor based programmable intelligent type, multi sensor detector with heat and smoke combination with base complete including necessary connection complete all as specified and as directed. Make:- Apollo / Advanced (UK) / Schneider / Godrej / AN Exflame Fire Protection Pvt Ltd.

Supply, installation, testing and commissioning of Response Indicators having flashing Green LED and Red LED for indication of fire and continuous monitoring including necessary connection to pin point location of fire complete all as specified and as directed. Make:- Apollo / Advanced (UK) / Schneider / Godrej / AN Exflame Fire Protection Pvt Ltd.

Supply and fixing of addressable type Manual call point break glass type compatible with main fire alarm control board microprocessor based as per IS-2189 and including chain hammer facility and blinking facility complete all as specified and directed. Make:- Apollo / Advanced (UK) / Schneider / Godrej / AN Exflame Fire Protection Pvt Ltd.

Supply, installation, testing and commissioning of addressable electronic Sounder with range of 25-30 metres with output not less than 4 watts including necessary connection complete all as specified and as directed. Make:- Apollo / Advanced (UK) / Schneider / Godrej / AN Exflame Fire Protection Pvt Ltd.

Supply and fixing of 1100 volts grade three single core 1.50 Sqmm size each, flexible multi-stranded copper conductor cable, PVC insulated and overall PVC sheathed round flexible connection wire as in electric connections complete all as specified and as directed.

Supply and fixing of 10 KVA capacity UPS suitable for minimum 60 minutes back up, three phase AC, designed for input voltage of 380 to 440 Volts and output voltage at 415 Volts with accuracy of + 1% comprising of the following provisions and specifications complete all as specified and directed: - (a) Type- three phase, IGBT based, Online UPS. (b) Input- 380 to 440 Volts ±10%, AC, 50 ±5% Hz, three phase, 4 wire (three Phase+Neutral+Ground) (c) Output- 10 KVA, 415 Volts ±10%, AC, 50 ±5% Hz, three phase, 4 wire (three Phase+Neutral+Ground) (d) Output Waveform- Sinusoidal (e) Voltage Regulation- ≤ ± 2% (f) Inverter Efficiency- ≥ 80% (g) Overload Capability- 110% for ≥10 Minutes. (h) Total Harmonic distortion (THDI)- <5% at Full load. (j) Transient response- Less than ±10% voltage variation at sudden application / removal of full load and it shall recover within 500 msec. (k) Environment- Approx. 0-50°C and 95% RH. (l) Charger- Charging mode shall be provided. (m) Battery Charging Voltage and Current shall be adjustable. (n) Line and load Regulation- ≤ ±2% (o) Output Ripple- ≤ 3% (p) Battery- Battery shall be of Sealed Maintenance Free (SMF) or VRLA type, Battery Backup shall not be less than 1 Hour at full load. (q) Capacity of Batteries- 26 Ah, 12 Volts- 32 Nos. MAKE- SINETRAC / VOLINA / Vinitec Electronic Laboratory.

Design, supply, erection, testing and commissioning of outdoor type LT Panel of overall size not less than 1800 mm width x 1200mm height (with canopy & base channel) x 450mm depth, M.S. channel base frame mounted (to be mounted on the 3 side covered brick pedestal of height 450mm above ground level) conforming to IS/IEC-61439-1&2 with rated fault 65kA/1 Sec with internal arc containment, suitable for 3 phase 4 wire, 415 Volts AC supply and having 4 Nos Aluminium bus bars of rating 500 Amps, duly powder coated with seven (07) tanks pre-treatment process followed by powder coated painting (thickness not less than 80 micron) with RAL 7032 (Siemens Gray) shade. The LT Panel shall be dust and vermin proof with degree of protection not less than IP-54. The LT Panel shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate with compartmentalized construction for individual switchgears and Bus Bars and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolts. The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprises as per PS Clause 33 on Page No. 89 & 90.

Excavation in trenches (manually) not exc. 1.50 m wide and not exc. 1.50 m in depth for laying cables or foundation of electric pole / Stay assembly and getting out in soft / loose soil including trimming sides and forming bottom surface to the required level / slope etc complete all as specified and directed.

M&L for laying of course sand free from sharp materials as in filling in trenches for cable protection, laid to a uniform thickness of 23 cm (15 cm under the cable and 8 cm over the cable) and gently punned down to 18 cm thickness as required complete all as specified and directed. Note:- Punned down thickness shall be measured for payment purpose.

M & L for laying brick as in protection covers over cables using well burnt sub class 'B' old size bricks in trenches over sand cushioning complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick in any type of soil complete all as specified and as directed.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

M&L point wiring for one light point controlled by one, one way switch complete with multi-starnded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable, 1100 volt grade, confirming to IS 694 & colour code in counduit system of wiring, drawn in and including medium grade PVC conduit not less than 20 mm dia concealed including cutting chases and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size, of not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and cup washers with all accessories including single core solid copper conductor 1.5 Sqmm size solid PVC insulated unsheathed cabe as earth wire to common earth dolly drawn in same conduit complete all as specified and as directed.

Description all as per srl item No. 60.00 here-in-before but one 3 pin socket outlet, 5/6 amps, on independent board complete all as specified and as directed.

Description all as per srl item No. 60.00 here-in-before but with copper conductor 2.5 sqmm for one 3 pin socket outlet, 15 amp on independent board complete all as specified and as directed.

S&F piano switch flush type SP 6 Amp, complete all as specified and as directed.

S&F cocket outlet 3 pin flush type 5/6 Amp complete all as specified and as directed.

S&F socket outlet 3 pin flush type, 6/16 Amp complete all as specified and as directed.

S&F Piano switch flush type 16 Amp complete all as specified and as directed.

S&F stepped type electronic fan regulator 100 Amp flush type complete all as specified and as directed.

S&F LED luminaire (600mm x 600mm), 35/36 watt, 230 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper cable of suitable size complete all as specified and as directed. Make:- Cat Part No. LCTLRNE-36-FO-CDL of CG / RC380B LED 36S-6500G5L60W60PSU OD of Philips, PLANO2X2PLR42WLED865S of Havells.

Taking down existing copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions seperately) and making good distrurbed surfaces of wall, floor etc complete all as specified and as directed.

M&L for sub main wiring concealed complete with two runs of single core 6sqmm (nominal area) 1100 volt grade single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc including provision of earth continuity wire with same cable as for wiring but in green colour complete all as specified and as directed. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar (1:3) and finishing with existing finishes shall be deemed to be included in the quoted rate.]

S&F single pole and neutral enclosure with two pin and earth plug and socket including MCB 20 Amp complete all as specified and directed.

S&F Heavy duty (Fully Metal construction) wall mount Air Circulator fan 450mm sweep, 1440 rpm, 4 speed control with regulator, single phase, 230 volts AC, 50 Hz consisting of powerful circulator motor with spiral guard design ensures high air thrust, high torque gear box with safety clutch, broad blade profile for low noise, resettable thermal overloaded protector, oscillating mechanism including making electric connection using three core flexible twisted copper conductor of size 23/0.0076 complete all as specified and directed. [Make: Almonard/ Khaitan/ Usha].

Supply and fix flush mounted factory made VTPN DBs, 415 volt IP - 43 protection IK-09 with metal double door with 200 Amp copper bus bar with 2 neutral bar, earth bar and cables management fully insulated bus bar with set of wire and door earthin with provision of space of 100 ampsMCCB as incommer and SP/TP MCCBs as outgoing 4 way complere all as specified and as directed.

S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs complete all as specified and as directed.

S&F sheet steel powder coated distribution board SPN 4 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.

S&F MCCB 63 Amp, 4 pole 415 volt C curve 16 KA complete all as specified and as directed.

S&F MCB SPN 6 to 32 Amp 240 volt C curve 10 kA complete all as specified and as directed.

S&F MCB SP 6-32 Amp 240 volt C curve 10 kA complete all as specified and as directed.

S&F ceiling fan 1200mm sweep complete with down rod and other accessories working on 230 V AC minimum air delivery of 210 cfm with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F LED light fitting 1x20 watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make:- Philips / Havells / Halonix / Bajaj.

S&F LED street light fitting 120 Watt complete fitting having pressure dia cast aluminium hoousing with heat resistant toughened glass & IP 65 protection including fixing arrangement comprising of suitable size dia of GI pipe 40mm dia light grade 1.5 Mtr long bend at 120 degree fixed to wall with 2 Nos clamps made of FI (50 x 6) mm and necessary nut, bolt and washers complete with all aceessories duly connection with three core flexible copper cable complete all as specified and as directed. Make:- Philips / Havells / Halonix / Bajaj.

M&L for earthing complete with galvanized steel earth plate (600 x 600)mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI wire 4mm dia as earth lead by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe, excavation and earth work charcole dust, common salt PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) for chamber and MS angle iron frame of size (40x40x3)mm and RCC cover 40 mm thick (1:2:4) type B1 (using 20 mm graded stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and as directed. Note:- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be deemed to be included in cost of above item.

Supply and install hi wall split units indoor/outdoor hot and cold type complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality, electric driven single phase of capacity 2.00 TR complete all as specified and as directed. Make:- Voltas Model 24H SZS or equivalent to /Blue Star/ Carrier. Note:- Power cable between indoor and outdoor, refrigerant tubing, outdoor stand and drain pipe shall be deemed to be included in quoted rate of this item.

Supply and installed Voltage Stablizer Copper wound for automatic operation, single phase naturally air cooled indoor wall mounted type & designed for input variation between 130 V to 280 V of capacity 5 KVA complete all as specified and directed by Engr-in-Charge. Make:- Sinetrac / Volina / Vinitec.

Supply and fix Air Curtain 4' long 220 volts 50 Hz having body material of Stainless steel, max air velocity of 21 m/s, noise level 50-70 db, 04 no blowers, with 02 nos motors having capacity of 0.76 HP complete all as specified and directed. Make Dolphy, Model No- DACN0008 or equivalent to Cronax/Euronics

Supply, installation, commissioning and testing of dehumidifier unit, main body made of metallic sheet duly powder coated, comprising built -in compressor of suitable capacity, special purpose fan motor high saving efficient system of minimum capacity of 140 litres per day, dehumidifying capacity of minimum 5.85 Kg per hrs, minimum Air flow of 1500 Cum per hrs, minimum humidity setting of RH 30% to 95% in working temp of 5 degree centigrade to 38 degree centigrade electric operated 220-240 volts 50 Hz having minimum power consumption of 2000 Watt rotary compressor based type with maximum controlling of noise level of 52 dB using CFC free refrigerant R-407C or R-410A, drain pipe arrangement towards outside internally fixture to remove the water outside the dehumidifying room, multiple functional wheels, automatic defuser system, delay timer for compressor complete in all respect as required at site and as directed by Engr-in-Charge. Make:- Model No AMDH1400 of Advance International or having same or superior specification in Mitsubishi / Dewteq/ Bry - Air.

MOHINDER SINGH AND SONS

M/s M Aali construction co

Shikhar ji Enterprises