Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹89.0 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹92.1 L+₹3.1 L (3.52%)Rejected-AOC 417 SHAHPUR NIJ MORTA DISTT GHAZIABAD | GHAZIABAD | UTTAR PRADESH | 201001 | L-2 | Rejected-AOC L-2 |
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
10 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPRITENDING ENGINEER
SE VTH CIRCLE IW BAREILLY
Mukhye Abhiyanta (Sharda) Ke Karayale Ki Sthaphna Ka Karya
2023_UPIDC_770933_3
08/SE/2022-23
Open Tender
Civil Works - Buildings
Item Rate
180 days
BAREILLY
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Yes
₹2.0 L
Yes
12 Apr 2023
27 Feb 2023
10 Mar 2023
27 Feb 2023
10 Mar 2023
27 Feb 2023
Amount
Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 m. as per direction of Engineer-in-charge & also including all cost of material, labour & T&P etc. complete. (As per I.D. S.O.R. Chapter - XIII/1)
Dismantling door and window chaukhat with hold fast including stacking material with in 60M. & also including all cost of material, labour & T&P etc. complete. (As per I.D. S.O.R. Chapter - XIII/3)
Dismantling existing plaster including disposal of refuse with in distance of 60 meters. & also including all cost of material, labour & T&P etc. complete. (As per I.D. S.O.R. Chapter - XIII/5)
Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled material with in 60 M distance. & also including all cost of material, labour & T&P etc. complete. (As per I.D. S.O.R. Chapter - XIII/7)
Laying Brick work C.M. 1:4 Mix cement & coarse sand as directed by Engineer in charge & also including all cost of material, labour & T&P etc.(As per I.D.S.O.R. Chapter - VII/2)
Centering & shuttering for R.C.C. work including cost of centering & shuttering material, labour and T&P required for proper completion of work etc.
Reinforcement including cutting, bending & binding in position as directed by Engineer in charge & also including all cost of material, labour & T&P etc. (As per P.W.D. S.O.R. Chapter -1 item no 11)
Laying R.C.C. 1:1.5:3 Mix cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.
Providing Sal wood work in frames of doors, windows, clerestory windows and frames, wrought framed and fixed in position & also including all cost of material, labour & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 9/9.1.2)
Cement Plaster in 1:4 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc. (As per I.D.S.O.R. Chapter - IX/7)
Applying one coat of cement primer of approved brand and manufacture on wall surface & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 13.43.1)
Proving and applying plaster of paris putty 2 mm thickness over plastered surface to propare the surface even and smooth & also including all cost of material, labour & T&P etc. complete.(As per P.W.D. S.O.R. Chapter - 13.26)
Finishing of wall with water profing cement paint of approved make such as super snocem durocem robicem, supreme quality of required shade on uncoated wall surface (one coat) over one coat white cement primer to give even shads after throughly brushing the surface to remove all dirt and dust and remaining of loose powder ed material including curing & cost of all materials. (As per I.D. S.O.R. Chapter - XI/15(I)2nd coat (As per I.D. S.O.R. Chapter - XI/16
Distemper two coat with oil bound distemper of approved brand manufacture and required shade on decoreted wall surface to give on even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british, shalimar, asian paints after thoroughly brushing saface free from mortar dropping and other other foreing matter and also including preparing the surface even also shad prepared smooth & including all cost of material, labour & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 9/649)above after first coat(As per P.W.D. S.O.R. Chapter - 9/650)
Supply and fixing of flush Doors (32 mm thick) conforming to I.S. 2202 part 1 (198) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally & also including all cost of material, labour & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 9/470 (i)For double leaf shutters(As per P.W.D. S.O.R. Chapter - 9/470 (iv)
Proving and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm & also including all cost of material, labour & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 9/9.51)
Wax polishing a new wood work with approved ready made wax polish or approved french polish after rubbing down with sand paper including all cost of material, labour & T&P etc. complete.(As per P.W.D. S.O.R. Chapter - 9/658) above after first coat(As per P.W.D. S.O.R. Chapter - 9/659)
Laying C.C. 1:1.5:3 Mix cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.
Providing and laying vitrified floor tiles in 60x60 cm size (thickness to be specified by the manufacturer) with water absorption's less then 0.080% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick cement morter 1:4 including grouting the joints with white cement and matching pigments etc. including all cost of material, labour & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 11.41.2)
Providing and laying "Brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coase sand mixed with water proofing compoundfilled gaps of coba & tap of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall paraper shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour T&P etc. complete for proper comletion of work including all cost of material, labour & T&P etc. complete. (As per P.W.D. S.O.R. Chapter - 11/547.1)
Providing and laying of interlocking concrete block pavement having thickness to 60 mm as per drawing and technical specification clouse 1504 ( exclusive G.S.B.) . As per PWD S.O.R. chapter no. 25.33/MORD 1500 (6.7)(2)
P/F gypsum board false ceiling i/c of all material, labour,t&P,etc.As per PWD SOR Chapter 14/12.45.4
Clearing ordinary jungle(as per ID SOR)
Turfing with chippi grass/khans doob incl of watering labour T&P,etc. As per PWD SOR Chapter XVI/18
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyripphos/Lindane E.C. 20% with 1% concentration .As per CPWD SOR Chapter 2.35.3
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 . As per CPWD SOR item no 19.32
Mild steel or iron work in heavy sizes such as trusses; built up gates, door , frames, record racks roof work, gates etc. wrought to required from including drilling holes , rivetting or welding where necessary , and also including supply of steel , bolts , nuts etc.& its fixing required for proper completion of the work. As per pwd sor chap. no. 10 item no. 503
Supplying , assembling, lowring and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, confirming to is:12818 including hire and labour charge, fittings and accesosries etc. all comlete, for all depth , as per direction of engineer in charge. 100 mm nominal size dia. As per pwd sor chap. no. 23 item no. 23.4.1
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR ITEM 12.50
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. NOTE: Item no 8.31 is brought from Sub Head 11 i.e. Flooring, Item No 11.36 AS PER CPWD SOR ITEM NO. 8.31
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Note: Item no 11.55 & 11.56 are brought from Sub Head 8 i.e. Cladding Work Item no 8.12 & 8.13 AS PER CPWD SOR ITEM NO. 11.56
Wall panelling Providing and fixing in position wall panelsof plain phenol formaldehyde synthetic resinstiles over kail wood frame and provision for providing switch board fixtures, etc.as per drawing complete with polishing and fining with french/ wax polish as per direction of engineer in chief.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.i)Group A
same as above (ii) Group B
same as above (iii) Group C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.i)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
same as above (ii) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
same as above (iii)2 X 6 sq. mm + 1 X 6 sq. mm earth wire
same as above(iv)4 X 10 sq. mm +2 X6 Sq. mm earth
same as above(v)4 X 16 sq. mm +2 X6 Sq. mm earth
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
same as above(ii)25 mm
same as above(iii) 40 mm
same as above(iv) 50 mm
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.i)5/6 A switch
Same as above (ii)2 way 5/6 A switch
Same as above (iii)15/16 A switch
Same as above (iv) 3 pin 5/6 A socket outlet
Same as above (v) 6 pin 15/16 A socket outlet
Same as above (vi) Telephone socket outlet
Same as above(vii) TV antenna socket outlet
Same as above (viii) Bell push
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.(i)1 or 2 Module (75mmX75mm)
Same as above (ii) 3 Module (100mmX75mm)
Same as above (iii)4 Module (125mmX75mm)
Same as above(iv) 8 Module (125mmX125mm)
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.(i)1 or 2 Module
Same as above(ii) 3 Module
Same as above(iii)4 Module
Same as above(iv)8 Module
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
Installation ,Testing, Commissioning of pre-wired,flourescent, compact flourescent, LED fittings of all types complete with accessories and tube/lamp etc, directly on ceiling/wall, including connections with 1.5 sqmm FRLS PVC Insulated, copper conductor single core cable and earthing the same etc.as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
Installation, testing and commissioning of exhaust fan,in the existing opening, including making good the damage, connections etc as required.Upto 450 mm
Extra for fixing the Louvers/shutters complete with frame for a exhaust fan of all sizes.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos.5/6 A modular switch, connections etc. as required.(for light plugs)
Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.(i)2 Pair (4 core) From LV box to different point
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.(i)1 run of cable
Supplying and fixing M.S. box with modular type telephone (RJ-11) outlet complete as required.
Providing and fixing following rating and breaking capacity and pole MCCB with THERMOMAGNETIC RELASE AND TERMINAL spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(i)125 A,36KA,FPMCCB
Same as above (ii)100A/63 A,36KA,FPMCCB
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required but without MCB/RCCB/Isolator)(i)4 way (4 + 12), Double door
same as above(ii) 8 way (4 + 24), Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i)Single pole
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.(i)For 4 way, Double door TPN MCBDB
Same as above(ii)For 8 way, Double door TPN MCBDB
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
Making of Earthing with COPPER EARTH PLATE of size 600mmx600mmx3mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.
Making of Earthing with G.I.(HOT DIP GALVANISED) EARTH PLATE of size 600mmx600mmx6mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.
Providing and fixing 25mm x 5 mm Copper in 40 mm dia G.I.Pipe from earth electrode including connections with brass nut,bolts, washers etc including excavation, refilling etc.as required.
Providing and fixing 25mm x 5 mm GI strip in 40 mm dia GI Pipe from earth electrode including connections with G.I. nut,bolts, washers including excavation, refilling etc as required.
providing and fixing 25x5 MM copper strip on surface or in recess for connections
Providing and fixing 25x5MM GI strip on surface or in recess for connections.
Providing and fixing 6 SWG.G.I.Wire on surface or in recess for loop earth along with existing surface /recess conduit/ submain wiring/ cables etc.as required.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.9)(i)100 mm dia
Same as above(ii)80 mm dia
Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet(DSR Item 17.60.1)
Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.8)Concealed work including cutting chases and making good the walls etc.(i) 20 mm nominal bore
Same as above(ii)25mm nominal bore
Same as above(iii)32mm nominal bore
Providing and fixing brass stop cock of approved quality(DSR 2021 item no 18.16)(i)15 mm nominal dia
Same as above 20mm nominal bore
Providing and fixing C.P . brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(DSR 2021 item no 18.52)(i)15mm nominal bore
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1:4 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.(DSR 2021 item no 19.7)Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(DSR 2021 item no 19.7.1.1)
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.(DSR Item 17.78)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(DSR Item 17.7.1)
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.4.1 One urinal(DSR Item No 17.4.1)
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :17.10.1 Kitchen sink with drain board:510x1040 mm bowl depth 250 mm each 6008.45(DSR Item No 17.10.1.1 )
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms.(DSR Itemn No 17.72)
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.(DSR Itemn No 17.71)
Providing and fixing toilet paper holder : C.P. brass each 680.80 (DSr Item No 17.34.1)
Providing and fixing P.V.C. waste pipe for sink or wash basin including Flexible pipe 32 mm dia(DSR Item No 17.28.2.1)
Providing and fixing 600 X 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats wiyh C.P. brass screws and washers complete. (DSR Item No 17.31)
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms.(DSR Item No 18.50)(i)15 mm dia, nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standard and weighing not less than 690gms.(DSR Item No 18.51)(i)15mm dia, nominal bore
Providing and placing on terrace (at all floor levels) polyethylene triple layer water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fittings and base support for tank(DSR Item No 18.48)
M/S OM ENTERPRISES
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .