Loading
Loading…
Loading…
Tender Value
₹29.1 L
EMD Value
₹58,300
Closing Date
7 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
12 conditions · 1 needing a document upload
The tenderer must hold a valid Electrical Contractor's License in thename of the participating firm/company, as required under IE Rules1956, Clause 45. Any offer not meeting this requirement shall besummarily rejected. Relevant supporting documents must be submittedalong with the tender. It shall be the sole responsibility of the contractorto comply with all statutory obligations, including liaising with Stateauthorities and obtaining necessary permissions to execute works acrossdifferent states,if work is awarded.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
40 conditions · 11 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please provide details of banks account no. of the firm for ECS payment required for necessary payments record as per Annexure-XII of Northern Railway Standard Tender Document 2022.
Please provide details of PAN no. (Self attested copy should be uploaded)
Please provide details of your GSTIN No. (Self attested copy should be uploaded).
Quantity of items may be decreased or increased as per site requirement:- i) For increase in quantity the payment will be made to the bidder as per GCC 2022 or latest. ii)The quantity mentioned against the items if decreased on the basis of requirements as per site then payment will be made to the bidder only for the quantity that has been executed at site. iii)The tenderer has to quote his rates keeping this in view.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Bid security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 2 (two) years.
Care in Submission of Tenders: Please refer to clause 3.0 of Northern Railway Standard Tender Document 2022
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
Mandatory updation of Labour data on Railway's shramikkalyan portal by Contractor.For details refer clause 5.4 of Northern Railway Standard Tender Document 2022
In addition to General condition of contract 2022 and Northern Railway Standard Tender documents, special condition attached shall also apply.
The quantities given above are approximate and can be increased/decreased as per extant rules.
The GST Act 2017 will be applicable as per extant policy as notified by Central/State Govt. and as amended from time to time. All the bidders/tenderers should ensure that they are GST compliant and their quoted rates are inclusive of taxes and GST.
No Post Tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenderers shall be treated as NULL & VOID. (Authority HQ Letter No. 74-W/O/Pt.XXV/WA/Loose dated 07.04.15).
The contract will be governed by Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
All Annexure should be uploaded in Standard format as prescribed in Standard Tendered Document-2022.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per clause 10 of Annexure -VIII of Northern Railway Standard Tender Document 2022 shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
Fraud & Corrupt Practice: Please refer to clause 3.10 of Northern Railway Standard Tender Document 2022.
Conditional offer and Alternative proposal by Tenderer: Tenderers shall submit offers that fully comply with the requirements of the Tender documents including the conditions of contract, design and specification requirements if any. Conditional offer or alternative offers will not be considered in tender evaluation and will be summarily rejected. The Tenderer shall have no claims in this regard whatsoever. "Any unconditional rebate offered by the tenderer should be mentioned on of 'Schedule of Quantities' specifically. To attract the rebate mentioned each page of schedule may refer the note for the conditional rebate mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid." mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid."
The tenderer shall ensure that the proper social distancing is maintained while execution of work besides following all the guidelines issued by Ministry of Health and Ministry of Railways in regard to COVID-19 pandemic.
Electrical work in c/w Improvement to Water Supply Arrangements including Replacement of Old Dilapidated Water Supply Pipelines, water Storage Tanks and Other Allied Works in Railway Colonies of Sirhind, Kurali, Morinda, Amb Andaura, Una Himachal and Nangal Dam station under the Jurisdiction of ADEN/SIR over Ambala Division
30-Elect-T-09-2026-27~NR
30-Elect-T-09-2026-27
Open
Works - General
3 Months
Ambala, Haryana
₹0
₹58,300
16 Sept 2026
16 Sept 2026
23 Sept 2026
95 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 29,12,776.18 | ||
| — | 890.00 | — | — | ||
| Supply & recessing/ fixing of P V C conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec..(i)25 mm (medium) | — | — | — | 43,627.8 | |
| — | 990.00 | — | — | ||
| Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i) 1 sqmm | — | — | — | 13,949.1 | |
| — | 1950.00 | — | — | ||
| Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning. (i)1.5 sqmm | — | — | — | 33,228 | |
| — | 1120.00 | — | — | ||
| Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning.(i)2.5 sqmm | — | — | — | 29,859.2 | |
| — | 1950.00 | — | — | ||
| Supply and drawing of the following Sizes FRLS PVC insulated multi-stranded copper conductor single core flexible cable conforming to IS 694 ( latest version ) in laid (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note including drawing, connection testing and commissioning.(i)4 sqmm | — | — | — | 85,936.5 | |
| — | 175.00 | — | — | ||
| supply,fixing,testing & commisioning of 6 amp module switch | — | — | — | 21,127.75 | |
| — | 53.00 | — | — | ||
| supply,fixing,testing & commisioning of 6 amp 5 pin module socket | — | — | — | 10,613.78 | |
| — | 49.00 | — | — | ||
| supply,fixing,testing & commisioning of 16 amp module switch | — | — | — | 10,939.74 | |
| — | 49.00 | — | — | ||
| supply,fixing,testing & commisioning of 16 amp module socket | — | — | — | 10,445.33 | |
| — | 64.00 | — | — | ||
| Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..(i)Bakelite batten/angle holder | — | — | — | 1,302.4 | |
| — | 113.00 | — | — | ||
| Supply of batten/ angle holder/ ceiling rose & installation on the junction box of laid conduit including connection, testing & commissioning as per tech. spec..(i)Bakelite ceiling rose 3 plate | — | — | — | 2,336.84 | |
| — | 20.00 | — | — | ||
| supply,fixing,testing & commisioning of 12 module metal GI box with 12 module cover plate | — | — | — | 14,059.4 | |
| — | 23.00 | — | — | ||
| supply,fixing,testing & commisioning of 8 module metal GI box with 8 module cover plate | — | — | — | 11,739.43 | |
| — | 79.00 | — | — | ||
| supply,fixing,testing & commisioning of 4 module metal GI box with 4 module cover plate | — | — | — | 15,186.96 | |
| — | 5.00 | — | — | ||
| supply,fixing,testing & commisioning of 16 amp module bell push | — | — | — | 1,081.05 | |
| — | 5.00 | — | — | ||
| Supplying and fixing call bell/buzzer suitable for single phase 230V, complete as required quarters as per scale of fitting attached. | — | — | — | 523.75 | |
| — | 1000.00 | — | — | ||
| Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | — | — | — | 26,510 | |
| — | 500.00 | — | — | ||
| Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | — | — | — | 54,520 | |
| — | 250.00 | — | — | ||
| Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | — | — | — | 1,02,195 | |
| — | 100.00 | — | — | ||
| Supply and erection of 103 mm inner dia Double walled Corrugated pipe under the railway track/road as per site required. | — | — | — | 37,071 | |
| — | 100.00 | — | — | ||
| Excavation and refilling of trench 0.3 Mtr. wide and 0.8 mtrs deep on pitched/stone/brick/ paved surface, road/crossing/platform etc and restoring the surface to its original condition. | — | — | — | 14,824 | |
| — | 8.00 | — | — | ||
| Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | — | — | — | 24,936.56 | |
| — | 80.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | — | — | — | 685.6 | |
| — | 10.00 | — | — | ||
| Design, Supply, testing & commissioning of floor mounted MS feeder post of out door type MS Sheet 16 SWG Die pressed of size 550x450x275 mm deep complete with Aluminium bus bar four nos duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals .( The Bus Bar will be of 500 Amps rating) | — | — | — | 40,060.4 | |
| — | 4.00 | — | — | ||
| Supply, erection, testing and commissioning of LED street light fitting complete with driver (70 watts) confirming to CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest specification and site requirement. in details. Guarantee-05 years from date of commissioning. | — | — | — | 23,133.36 | |
| — | 28.00 | — | — | ||
| Supply,erection,testing and commissioning of LED tube light fittings 20 Watt complete as per specification of CEE/NR/121-Elect/PS/2019(Rev-04) dt 04/11/2019 or latest. Guarantee-05 years from date of commissioning. | — | — | — | 16,915.64 | |
| — | 4.00 | — | — | ||
| Supply, fixing of 1 meter long 40 mm dia GI pipe bracket with two no. 25x6mm clamp each with nut & bolt to hold. | — | — | — | 1,876.92 | |
| — | 300.00 | — | — | ||
| Supply , lying of GI pipe class B ISI marked under road, clamping with erected pole or wall as per tech spec for passing cable.(i)100 mm dia | — | — | — | 2,79,858 | |
| — | 5.00 | — | — | ||
| Supply, installation, testing and commissioning of the following double door wall mounted pre fabricated LT distribution Board of approved make as per spec. Make - Havells,L&T,Legrand or equivalent."i) Incoming MCB TPN, 63 A ,10 KA, (B/C)=01 No. ii)Out going MCB SP 6/32 A 10 KA,(B/C)=18 Nos.(6 Nos on each phase)" | — | — | — | 33,421.75 | |
| — | 10.00 | — | — | ||
| Supply Installation Testing & commissioning of Decorative LED Mirror Light Fitting 10- 12 watt to be fitted in mounting.the fitting should have decorative and attractive look.LED should be confirming to CEE/NR's spec. No. CEE/NR/121- Elect/PS/2018 (Rev- '3') or latest at Tech Spec-III attached & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') at Tech Spec-IV attached or latest. | — | — | — | 7,519.3 | |
| — | 15.00 | — | — | ||
| Supply, fixing, testing and commissioning of surface mounted /flush type power unit complete with 4 modular plate, 25 A MCB, starter, plug & socket for AC. Make Legrand, Havells, Crabtree, Wipro, Cona ,anchor or equivalent as per IS & IE rules. | — | — | — | 10,533.75 | |
| — | 20.00 | — | — | ||
| Supply and fixing of RCCB 2P 25A 30mA with metal enclosure. RCCB and metal enclosure should be of same make of reputed manufacturer and as per tech. spec. | — | — | — | 45,820.2 | |
| — | 5.00 | — | — | ||
| Supply ,installation ,testing & commissioning of AC MS Exhaust fan 380 mm 900RPM , copper wound motor and with double ball bearing connection with twin core PVC insulated flexible cable size 14/0076" as required suitable for operation on single phase 230 V AC Supply system, earthing, including by grouting MS Nut & bolt of suitable size as per IS:2312 or latest. | — | — | — | 17,772.5 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of polycarbonate Exhaust fan 250 mm sweep, with self opening louvers shulters, white colour, complete with all accessories including fixing in box made by ply wood board as per IS:2312 or latest. | — | — | — | 26,876.2 | |
| — | 5.00 | — | — | ||
| Supply of Single Phase Meter PVC box with IP-54. The size of the box should be such that it can easily accommodate energy meter supplied vide item no.1 of this work. The box should have locking and sealing arrangement, viewing glass/fibre to provide clear view of meter display. The box should be single piece moulded without any joints with concealed metal hinges, mounting screws fitted from inside and adequate space for meter and cut-outs. | — | — | — | 10,390.45 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of MCCB's with enclosure of the following sizes,100 amp | — | — | — | 1,43,836 | |
| — | 4.00 | — | — | ||
| Supply, testing and commisioning of submersible pump motor set (BEE), 5 star rating, 10 HP/7.5 KW, 415 V, 3 phase copper winding, 66 Meter head, 420 LPM, confirming to latest CEE spec & ISI marked. | — | — | — | 2,07,663.88 | |
| — | 4.00 | — | — | ||
| Supply of submersible pump motor set (BEE), 5 star rating, 10 HP/7.5 KW, 415 V, 3 phase copper winding, 66 Meter head, 420 LPM, confirming to latest CEE spec & ISI marked. | — | — | — | 1,74,140.36 | |
| — | 4.00 | — | — | ||
| Fully Automatic Star-Delta smart controller suitable for 15 HP pump-motor 3 phase 415VAC, 13-32A, Compatible with model: MU-G15HS of L&T make, inbuilt anti theft protection, dry run, locked rotor & short circuit protection, voltage and current based protection, hour based nd eal time clock based timer with line voltage, phase current, power factor, energy metering, total run time of pump. Complete operation (Remote on/off) through SMS or LTLK connect mobile App or IVRS in Hindi & English language, micro controller based technology., Make: L&T, Havells, Seimens, Schneider, C&S or similar. | — | — | — | 1,15,999.96 | |
| — | 1500.00 | — | — | ||
| Supply, installation, testing and commissioning of 06 sq mm weather proof submersible cable 3 core flat (1x3x6 sq mm) | — | — | — | 3,87,165 | |
| — | 200.00 | — | — | ||
| Fabrication,supply , fixing and commissioning of 80mm dia "C" class G.I. Pipe lengths of 3 meters( 10 feet) G.I. Pipe conforming to IS 1239.with 2 nos. welded M.S. flange of size 6"/3" dia 5/8" thickness with four drilled holes of 1/2" dia and and 75/38 mm dia flange with 4 no holes of 3/5" dia and two semicircular cable grooves,for cable( Lowering will include the lowering of motor alsoto be either supplied by Rly or Contractor) | — | — | — | 7,53,044 | |
| — | 450.00 | — | — | ||
| Supply, fixing & commissiong of 50x12 mm dia galvanized nut bolt and washer. | — | — | — | 5,832 | |
| — | 120.00 | — | — | ||
| Supply, fixing & commissioning of rubber gasket 3mm thick with 4 Nos holes.(i)8x4'' with hole size 5/8" | — | — | — | 2,947.2 | |
| — | 4.00 | — | — | ||
| Supply ,fabrication and fixing of C.I. Bend one side 3" and other side 4" with MS bend size 6"/3" one side & other side 8"/4" 5"/8" thick holes 4 nos. 1/2" & 5/8" | — | — | — | 4,757.24 | |
| — | 4.00 | — | — | ||
| Supply, fixing & commissioning of following pump accessories(i)Reflex valve size 4' | — | — | — | 15,398.24 | |
| — | 4.00 | — | — | ||
| Supply, fixing & commissioning of following pump accessories(i)Sluce valve size 4" | — | — | — | 15,697.12 | |
| — | 8.00 | — | — | ||
| Supply, fixng & commissioning of MS clamp for holding the pump at stop(i)4" size thickness 15' long 3' wide 1/2" thick | — | — | — | 5,417.52 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure A
ATTACHMENT
AnnexureXXIV.pdf
ATTACHMENT
AnnexureXXIVA.pdf
ATTACHMENT
GCCCorrectionslips_compressed1.pdf
ATTACHMENT
GCCCorrectionslips_compressed1_1.pdf correction slip
ATTACHMENT
GCCACS11_compressed.pdf
ATTACHMENT
LatestCEESpec_compressed1.pdf
ATTACHMENT
Submersiblepumpspec.pdf
ATTACHMENT
TenderDOCT8.pdf
ATTACHMENT
Annexure-APartnershipRetirementEmployes.pdf
ATTACHMENT
GCCCorrectionslips_compressed1_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .