Construction Work of R.C.C Road with Tri-Mix in Ward-7, Rahu Ravat House to Bhidbhanjan Mahadev Mandir, Talaja Under 15Th Finance Commission Grant Year-2023-24. (Second Attempt)

NAME OF WORK : CONSTRUCTION WORK OF R.C.C ROAD WITH TRI-MIX

LOCATION :- Ward-7, Rahu Ravat House To Bhidbhanjan Mahadev Mandir, Talaja (Second Attempt)

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including removing the excavated stuff and depositing on the

road side slope as directed up to all lead and sretta 405.00 112.02 Cumt

Supplying of crushed stone aggregates, chippings etc. of machine cut stone

of 40mm size free of disintegrated pieces, deleterious and organic matter

(for bitumen surface dressing etc.) and grading as per I.R.C. Code 40mm all

lead and lift 202.50 659.93 No

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

blindage) (iii) 40mm to 60mm size crushed stone 202.50 268.48 Cumt

Supplying of Stone Dust all lead and lift 50.70 312.19 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. (ii) Sand/ Stone dust 50.70 158.53 Cumt

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials ) including filling in depressions which occur

during the process. (A) With power roller 1350.00 16.25 Sqmt

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal size) and curing complete

including cost of formwork in (A) Foundation and Plinth. 202.50 3824.10 Cumt

Providing and cast in-situ ordinary cement concrete M250 (1:1:2) for

average 20cm thick wearing coat/c.c.pavement as directed in approved

fixed side formwork of steel channel including vibrating by screed-needle

vibrator and finishing by plate vibrator and finished in continuous operation

including providing of contraction joint at every 4.00mtr. and expansion joint

at interval of 40mtr. applying debonding strips, bitumen primer,bituminous

sealant and curing etc. complete including cost of admixtures Melamine

Base/ Naphthalene Base using 1.5 Kg. per Cement Bage 202.50 5479.63 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 6750.00 77.28 Kg

Tracing of old Manhole all type 9.00 1202.00 Nos

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store

or at site of work precast RCC M.200 Frame & cover suitable to drainage

M.H. and as per type design & Drawing including cost of reinforcement M.S.

Angles or Flat, curing mold work etc. Frame Suitable for 50cm opening of

Cover Suitable for 50cm opening of MH 5.00 1173.00 No

Road marking with hot applied thermoplastic paints with reflectorising glass

beads on bitumin surface providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass beads @ 250gms per

thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-

015. The finished surface to be level, uniform and free from streaks and

holes. zebra patta /bump patta lane/ center line/ edge line/cut patta. The

white color marking should provide liminance coefficinet on emend road

shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/

m2/lux during the service life during the day time. The marking should meet

the performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the

Retro reflectivity should be two years. 64.80 367.72 Sqmt

Demolition and disposal of unserviceable materials with all lead and lift. (i)

cement concrete. 135.00 554.05 Cumt

Total Amounts Rs..……

Total Amounts Rs..……

I/We am/are willing to carry out the work @ ______% Above / Below___________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 28,05,732=00 Put to Tender Rs. 28,05,732=00

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Talaja Nagarpalika

Chief Officer President

Talaja Nagarpalika Talaja Nagarpalika