Provn of parking shed and fencing, 1x toilet block at APETA, 2x toilet at MLI, 3x hard standing and renovation of bathroom complex of HQ sub area camp and Special repair of bldg No P-24 (1 to 4), P-15 (1 to 3) at Tigris line and P-104 (1 to 3) at TC

Amount

Surface excavation/dressing not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in any type of soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, cable etc. and getting out complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.50 cum,in any type of soil getting out soil, removing to a distance n exc 50 m & making good surface complete all as specified.

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n. exc. 15 cm thickness(below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete etc complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete as in sub base floor complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed (using old size bricks).

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls but in in cement mortar 1:4 (using old size bricks) complete all as specified.

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm size graded stone aggregates) 40mm thick in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed

Taking down cement or cement lime plaster on walls of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work in CM 1:6 and finished surfaces even and smooth without using extra cement complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:4 on walls (fair / unfair finished faces of brick/concrete) with WPC if ordered, finished even and smooth without using extra cement complete all as specified.(Note- WPC will be measured and paid separetely)

M&L 10 mm thick plaster in CM (1:3) on fair faces of concrete ceiling surfaces,finished surfacese even & smooth without using extra cement complete all as specified.

Demolition of stone slabs and tiles of any description and thickness as in floor, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black or coloured" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including grinding and moulding of exposed edges of granite complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and dispose off rubbish outside the MD land complete all as directed.

M&L non skid ceramic coloured tiles joint free tiles 7 to 8mm thick ,area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L non skid ceramic coloured tiles joint free tiles 7 to 8mm thick ,area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm as in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including screed bed or rendering 10 mm thick in cement mortar 1:4 ,complete all as specified and directed.

M&L non skid ceramic coloured tiles joint free tiles 7 to 8mm thick ,area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic digital coloured tiles of size 375 x 250 x 6 to 7mm as on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 finished roung to fix tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 200 x 300 x 6 to 7mm/ 450mm x 300/350 mm x 6-7 mm thick as on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 finished roung to fix tiles complete all as specified and directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm , set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified.

M&L Sand clean and dry free from sharp material for laying of interlocking pavor block / under floor or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness , M- 40 grade, laid over sand cussion,filling joints with sand and edges shall be secured with PCC 1:2:4 type B-1 , complete all as specified and directed .(Note- Sand cussion & PCC 1:2:4 shall be measured and paid separetely).

M&L for heavy duty skid proof coloured parking tiles n.exc0.36 sqm each tiles , 10 mm thick (square/rectangular) in floor, parking, path etc, jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed..

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

Taking down existing roof treatment/ cement plaster from roof surface including racking out joints, hacking for key and scrubbing down with water complete all as specified.

M&L for water proofing treatment on roof slab as per the following steps :- i) Applying a coat of Asian smart care mortar and GP grout mortar and treating of construction joints , filling of honeycomb with polymer modified mortar(cement : sand: smartcare multipurpose polymer of Asian paints or equivalent product of Thermax/ Berger) . (ii) .Cleaning the surface and applying (Resin & hardner) smart care epoxy primer 2K of Asian paints or equivalent product of Thermax/ Berger on the clean surface for bonding of PU magnum with the existing concrete surface. (iii) Supplying, applying water proofing treatment to terrace area with Asian paints smart care PU magnum, single component highly electromeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger including all necessary surface preparation, coving using smartcare multipurpose polymer, water pond test etccomplete as per manufacturers instruction and specifications and application methodology. The same coating shall have dual combination of 250 % elongation. Note : (i) The work of water proofing treatment shall be got executed through manufacturer or authorised applicator only. (ii) Work shall be executed in smart assurence system.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor for laying floor finish complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor for laying floor finish complete all as specified and directed.

M&L for 25 mm thick cement concrete (1:2:4) type B-1(using 20mm graded stone aggregate) as in sub base of floor for laying floor finish complete all as specified and directed.

M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work for fair finished surface of concrete complete all as specified and directed.

M&L for form work to soffit and sides of concrete slabs supported on walls and similar work for fair finished surface of concrete complete all as specified and directed.

M&L for form work to edges of concrete floors ,break in floors , window cill,concrete railling etc for fair finished surface of concrete, exc 10 and n exc 20 cm wide , complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

M&L TMT bars 5mm dia and over upto and including 10 mm dia, as in stirrups, spacers, binders etc, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F TMT MS bar 6 to 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified and directed .

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, benching,roof kerb,bed blocks etc including necessary weathering, slightly rounded or chamfered angles and throating,form work etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound on fair faces of chajjas, roof projection,facia ,finished even and smooth with out using extra cement , complete all as specified. (Note:- Water proofing compound where ever ordered shall be added and the same will be measured and paid separately)

Supply only water proofing compound as per manufacturer's instructions, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1.0 but not exc. 2.0 Sqm each and refixing in same opening after necessary repair, complete all as specified and directed.

Taking down shutters of any description exc 1.0 but not exc. 2.0 Sqm each and removing from siter, complete all as specified and directed.

Taking down shutters of any description not exc. 1 Sqm each and removing from site complete all as specified and directed.

S & F second class hardwood (Golden Teak) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed..

S & F 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and one face covered with decorative face veneers teak wood finished with lipping/frame to match and commercial type on other face including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S & F factory made steel windows/ventilator ,fixed type with glazing bars etc.complete all as specified.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness i.e. edges of shutter shall be painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification, all as specified and directed.

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S&F Hasp and staple 100mm safety type 304 gde, stainless steel with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F stainless steel barrel tower bolts 150 mm long gde 304 one piece and fixed complete all as specified and directed.

S & F stainless steel barrel tower bolts 200 mm long gde 304 one piece and fixed complete all as specified and directed.

S & F stainless steel handles 150 mm long gde 304 one piece and fixed with screws/ welded to frame ,complete all as specified and directed.

S & F stainless steel handles 125 mm long gde 304 one piece and fixed with screws/ welded to frame ,complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads or glazing pins complete all as specified.

M&L for 3 mm thick figured glass, pin headed and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F aluminium powder coated windows and ventilator shutters, without sash bars aluminium section weighing 0.55Kg/ Sqm including necessory joining cleats, glazing clips, rubber packing ,anodised aluminium beading,screws, glass ,aluminium hinges, handle tower bolt etc including making good the disturbed surface complete all as specified.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or weldedcomplete all as specified & directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified & directed.

S&F Solid PVC door frame of size 50mmX95mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification & drawing as shown in SSR part II complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification & drawing as shown in SSR part II complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed

S&F 150 mm long stainless steel 304 grade tower bolt fixed with satinless steel screw complete all as specified

S&F 150 mm long stainless steel 304 grade handle fixed with satinless steel screw complete all as specified

S&F 250 mm long stainless steel 204 grade bright finish sliding door bolt (bolt type, dia of bolt 12mm) with hasp, staple , fixing clips, fixing bolts and sliding bolt of stainless steel and fixed all as specified and directed by Engr-in-charge

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F alluminium anodized handle, fabricated type,size150mm, ISI marked complete all as specified and directed .

M&L stainless steel butt hinges, medium weight ,100 mm size ,gde-202, complete all specified.

M&L mild steel butt hinges, medium weight ,100 mm size ,cold rolled, complete all specified.

Supply and fix 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in replacement 1 mm thickness stainless steel 202 Gde drapery rod 20 mm dia incl brackets, decorative finials at both ends complete all as specified.

S&F mild steel framed work for such as grills, grating,door frames etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 complete all as specified & directed.

S&F MS work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 210W Gde E-250 quality A complete all as specified

S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' .

S&F structural steel work in tubular trusses ,posts/poles, including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade ST -240 quality - A complete all as specified

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed .

S & F wire netting of galvanised steel wire of dia 1.40 mm and mesh size 12 mm,fixed with tinned tacks of wire stapples as approved by Engineer-in -charge ,complete all as specified and directed.

S&F mild steel work flat iron etc incl nut-bolts for securing chain link fencing in posts and struts including fabrication,ie cutting tops, drilling holesnotching for wire, welding etc and similar articles conforming to Fe- 290 gde E-165 complete all as specified and directed.

S&F joists,channel, angle, tee sections etc fixed independantly, with out connecting plates etc as in fencing posts conforming to Fe- 410 W (gde E-250 quality B) complete all as specified and directed.

M&L Pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F CP Grating 125 mm dia with or without hole complete all as specified and directed.

S&F CP Grating 150 mm dia with or without hole complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth in Brick/ RCC complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F vitreous china wash hand basin with brackets, white, size 550 x 400 mm including CP brass 32mm waste fitting with long screwed shank and fly-nut, 32 mm PVC waste pipe including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest fixed with cement joint and providing lime concrete bedding and connecting to flusing cistern including 'P' or 'S' trap of CI complete all as specified and directed.

S&F Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed.

S&F chromium plated angle valve 15 mm bore ,cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends , complete all as specified .

S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed..

S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F 75 mm dia PVC (SWR) multi floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Taking down CI/AC/PVC pipes and fittings upto 110mm dia in any position and removing from site complete all as specified.

S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ wall with PVC clamp and holder bats complete all as specified.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ wall with PVC clamp and holder bats complete all as specified.

S & F PVC (SWR) bends, reducer any radius with rubber ring joints,T, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) bends, reducer any radius with rubber ring joints,T, fixed to wall / floor / in trenches complete all as specified and directed for 75 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) vent cowl 100 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F ball valves brass 20mm dia high pressure with polythene floatand fly nut, screwed down for iron pipe or brass ferrule complete all as specified.

S&F 15 mm dia swan neck pillar taps, cast copper alloy , chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe , complete all as specified and directed.

S&F 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed

S&F 32 mm dia waste fittings, brass chromium plated suitable for sink, WHB, etc with long screwed shanks and flynuts, flange embedded in cement complete all as specified and directed.

S&F of pillar fancy type 15mm dia cast copper allow with capstan head chromium plated screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.

S&F stop valve, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastesfittings / coupling including 32 mm waste pipe over and incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified

Dismantling water tank exc 250 ltr and not exc 500 ltr Capacity and incl fixtures/ fittings, taking down from roofs (any height) complete all as specified and directed.

S&F gun metal globe or gate valve of size 20mm dia with iron wheel head screwed both ends and for iron pipe & fixed complete ISI marked complete all as specified and directed.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve 20 mm size PTMT, with polythelene float and fly nut and 20mm dia GI medium grade wash out pipe , approx lenght 0.45 mtr, with pluged at one end complete all as specified and directed.

Dismantling water tank exc 250 ltr and not exc 500 ltr Capacity and incl fixtures/ fittings, setting a side(or lowering if required at any height) for repairs,cleaning etc and hoisted if required re- fixing & re-connecting with supply /inlet,complete all as specified and directed.

S & F soap dish, brass, 100x100x60mm chromium plated,fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F CP brass shower rose125 mm size with or without swivel joint including screwed down for iron pipe ,complete all as specified and directed.

S&F CP brass hot & cold wall mixer suitable for 15 mm dia pipe for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan (Padestal pattern) whiteP or S trap incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device , suitable flush pipe PVC ,complete all as specified and directed.

S & F vitreous china wash hand basin white, oval type counter top of size 550mmx400 mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc complete all as specified and directed.

S & F 15 mm dia bore chromium plated concealed stop cock, complete all as specified and directed.

S&F 32 mm dia PVC waste pipe for WHB and sink not less than 60 cm long with coupler, complete all as specified and directed by Engr-in-charge

Taking down existing unserviceable WC/EWC/WHB/cistern/sink etc of any description in any position and removing from site, complete all as specified and directed by Engr-in-charge

Taking down existing unserviceable bib tap,stop valves,piller tap,towel rail etc of any description in any position and removing from site, complete all as specified and directed by Engr-in-charge

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate),as in cover slabs of manholes, open drains etc inclusive of form work and set in CM (1:4) complete all as specified and directed. (Note:- Reinforcement shall be measured and paid separately).

M&L for construction of soakage well, internal dia 1.20M dia & depth 3.00M including excavation and earthwork in any type of soil ,brick workin cm,RCC slab & covers,inter connecting pipes etc,complete all as shown on TD drawing, complete all as specified and directed.

S&F, laying, jointing and testing salt glazed stone ware drain pipe 150 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 complete all as specified.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer including preparation of new steel or iron surfaces of any description exc 10 cm width or girth, complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation of old painted steel or iron surfaces of any description exc 10 cm width or girth, complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation of old painted wood surfaces of any description exc 10 cm width or girth, complete all as specified and directed.

M&L for three coats of white wash on new untreated wall surfaces of any description including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new untreated ceiling surfaces of any description including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of old walls etc including corneces with scrapping, wire brushing and washing with water and applying two coats of exterior grade weather proof paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new surfaces of walls etc including corneces with scrapping, wire brushing and washing with water and applying two coats of exterior grade weather proof paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for one coat of white wash on old decorated wall surfaces of any description including preparation of surfaces complete all as specified and directed.

M&L for one coat of white wash on old decorated ceiling surfaces of any description including preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer primer including preparation of new wood surfaces of any description exc 10 cm width or girth, complete all as specified and directed.

M&L for two coat of cement base paint over a coat of suitable primer on external surfaces of walls etc including preparation of new surfaces of any description,complete all as specified and directed.

M&L for complete removal of existing treatment of old walls etc including corneces with scrapping, wire brushing and washing with water and applying two coats of distemper oil emulsion over a coat of 1 to1.5 mm thick wall care putty finish smooth surface, complete all as specified and directed.

M&L for preparation of new surfaces of walls etc including corneces with scrapping, wire brushing and washing with water and applying two coats of distemper oil emulsion over a coat of 1 to1.5 mm thick wall care putty finish smooth surface, complete all as specified and directed.

M&L for construction of RCC hume pipe septic tank designed to carry out sewage and sludge water including excavation in any type of soil,PCC 1:4:8 type D2 in foundation, vent shaft, connection etc for five user complete all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , including concealed rigid PVC conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for following :-

One light /fan point controlled by one-one way switch.

One three pin 5 Amp socket on independent board

One three pin 5 Amp socket on same board with other switches.

All as per Item No 154 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

All as per Item No 154 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor and 4 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

S&F switch piano flush type single pole, 5 Amps, one way all as per specified & directed.

S&F switch piano flush type single pole, 16 Amps, one way all as per specified & directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete all as specified & directed.

S&F lamp holder PVC/polycarbonate type with black plate angularfor batten, complete all as specified & directed.

S&F MCB single pole, 240 volt, 10 KA, 5-32 Amp, 'B' series complete all as specified.

S&F MCB double pole, 240 volt, 10 KA, 40 Amp, 'B' series complete all as specified.

S & F sheet metal enclosure DB's 240 volts with 200 amps rated bus bar and double door, 6 way ,IP 43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

M&L for cutting and screwing existing steel tubing for addition/ alterations(each cut measured),making connection for distribution/branch with GI mains of size 16 to 40 mm bore complete all as specified.

S&F wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 4000K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Wipro Cat part No WI0922208(tube batten)& LL13-181-65SE(tube)/ Philips cat part No TMC501P1xT LED 22 WP -3241(tube batten & MAS LED 1200 mm 18 w-865-T-81(tube)/Havells Cat No LUMILINEPLUSBS20WLED865 SPCSS.

Supply & fixing air ventilation fan metalic body, AC single phase 230/240V of size 300mm sweep double ball 900RPM making necessary fixing arrangements on wall with fasteners 4 Nos nut bolts connecting with three core flexible copper conductor cable (23/0.0060) from ceiling rose complete all as specified and directed.Make- Havells Cat Pt No-Ventil AirDXWHT/CG Cat Pt No-BRISKAIR or equivalent in Orient/Usha.

M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 m below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 20 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch all as shown in electrical plate No 3 of SSR Part-I 2009 including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia), with 40x40x6mm MS angle iron frame including necessary earth work and testing on completion, complete all as specified and as directed.

Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches complete all as specified and directed by Engineer-in-Charge.

Supply, Laying,jointing and testing XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 16 Sqmm 2 core including lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/ path/ alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified.

Supply, Laying,jointing and testing XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 16 Sqmm 4 core including lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/ path/ alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified.

S&F 'Light' grade galvanised steel tubing with all fitting laid in trenches, fixed to wall/pole and floor of 50 mm dia for cable protection complete all as specified and directed.

Supply, Laying,jointing and testing XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 4 core including lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/ path/ alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified.

S & F LED Mirror light fitting , 10 Watt, 230V AC, surface mounted decorative with driver holder and LED lamp mirror type with high output diffuser, 2 feet type including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed.

Supply & fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW ,capacity 25 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece ,fixing arrangement,connection to electric source etc complete all as specified.

S&F sheet metal enclasures single pole and neutral enclosure with 2 pin and earth plug and socket complete with and including one single pole MCB 20 Amp 240Volt complete all as specified.

S & F vibration free exhaust fan AC single phase 230/240V of size 300mm sweep double ball 900RPM with louvers making necessary fixing arrangements on wall with hold fasteners 4 Nos nut bolts connecting with three core flexible copper conductor cable (23/0.0060) from ceiling rose complete all as specified and directed.

S&F Residuel circuit breaker (RCOB) for earth leakage, over load and short circuit protection four pole 30 mA of capacity 63 amps ,complete all as specified.

S & F LED tube light fitting along with fixture , 16 Watt, 230V AC, surface mounted decorative including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed.

S&F sheet metal enclosures double door SPN for DB's when MCB's to be used, 4 way with 200 amps bus bar , complete all as specified and directed .

S&F sheet metal enclosures double door SPN for DB's when MCB's to be used, 8 way with 200 amps bus bar , complete all as specified and directed .

M&L sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sqmm as current carrying conductor and one run of 4 Sqmm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified. Note:- Two runs of wire and one run of earth wire & PVC conduit shall be measured as one meter only for payment purpose.

S & F LED wall mounting, brushed nickle finishfixture with opel glass diffuser suitable with 9 w LEd lamp B22 base light fitting along with fixture including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. make:-LUKER Cat pt No- LHFOAJETZ1I0601nx9 w LED lamp/1nx7.5 w LED lamp or equivalent in Havells/Crompton/Wipro as approved by GE.

S & F exhaust fan AC single phase 230/240V of size 300mm sweep double ball 1200RPM with louvers making necessary fixing arrangements on wall with hold fasteners 4 Nos nut bolts connecting with three core flexible copper conductor cable (23/0.0060) from ceiling rose complete all as specified and directed.

Supply & fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW ,capacity 35 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece ,fixing arrangement,connection to electric source etc complete all as specified.

S&F MCB SPN, 240 volt, 10 KA, 5-32 Amp, 'C' series complete all as specified.

S&F MCB SPN, 240 volt, 10 KA, 40 Amp, 'C' series complete all as specified.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , drawing through exisitng conduit and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly terminated in modular sunken boxes complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed. (Note - Modular sunken boxes and cover plate shall be paid separately under respective item.)

All as per item No 190 but point wiring for one 5 pin 5 Amp socket outlet point on same board with independent switch,complete all as specified and directed.

All as per item No 190 but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 190 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F Supply and fixing switch modular 6 Amps 230 Volts one way switch complete all as specified and directed.

S&F Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and as directed

S&F Socket 6A/16 Amps-2/3 pin combined AC 230 Volts modular type complete all as specified and as directed.

S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified & as directed.

S&F GI sunken box with flush metal GI box 2 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting to match the existing finishes complete all as directed.

All as per item no 198 here in above but 3 module.

All as per item no 198 hrer in above but 4 module.

S&F combind cover plate white 2 module suitable for modular switches complete all as specified and directed.

All as per item no 201 here in above but 3 module

All as per item no 201 here in above but 4 module

AASNA URZA INDIA PRIVATE LIMITED

M/s Teg Singh Negi