Repairing & Renovation

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[1] Dismentling doors, windows, ventilators etc. (wood or steel) 14.00 Each 182.94

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead

and lift (i) Not exceeding 3 Sq.M. in area.

[2] Dismentaling tiled of stone floors laid in mortar including 205.00 Sqm 46.77

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

[3] Brick work using common burnt clay building bricks having 50.00 Cum 3036.25

crushing strength not less than 35 Kg./ Sqm. in cement mortar

1:6 (1 cement : 6 Fine sand) in super structure above plinth

level upto All floor level (Conventional)

[4] Providing 15mm thick cement plaster in single coat on Rough 189.10 Sqm 221.60

(Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand)

[5] Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting 89.10 Sqm 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

[6] Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' 42.00 Sqm 1073.13

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement :3-coarse sand) finishing

with flush pointing in white cement.

[7] Providing and laying Mirror polished Machine polished Green 26.30 Sqm 1720.03

Marble stone slab 18mm (Average) thick for doors & windows

sill & Jams clading as per design including full moulded round

front steps & 1cm nosing & necessary groove on trads of steps

;laid on 20mm thick cement mortar 1:6 (1 cement : 6 coarse

sand) jointed with gray cement sluury including rubbing and

polsihing etc. complete.for Doors / windows sill & jams

[8] Providing and fixing standared extruded of alluminium 2.00 Sqm 1525.00

section of size 63.50 x 38.10 x 1.95 mm, @ Wt 1.094Kg /Rmt

with colour anodized alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as details etc

complete for Fix window.

[9] Providing & Fixing Premium quality approved make like 4.00 Nos 5976.05

Jaquar / ESSCO or equivalent Urinal of size 355 x 340 x

mm connetcting with PVC waste pipe, Trap etc complete

including labour, material, trasportation etc.complete as

directed by engineer incharge.

[10] Providing and fixing flat back wash basin 550 mm x 400 mm 5.00 Nos 1818.00

size of first grade, white in colour with single hole for pillar

trap with CI or MS brackets painted with including cutting

holes and making good the same including providing and

fixing CP brass wastecoupling 32mm dia including providing

and fixing MI washer union 32 mm dia, including providing

and fixing 15mm dia pillar tap capstan head screw down high

pressure with screws, shanks and back nuts, including

providing and fixing waste pipe 15mm x 600 mm pvc inlet

connection 15mm brass screw down stop tap with necessary

fittings etc. complete

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[11] Providing & Fixing Premium quality approved make like 3.00 Nos 15739.59

Jaquar / ESSCO or equivalent Wall Hung European type W C

Pan with in Built Jet, PP Soft closed seat cover, Hinges, Dual

Flush cistern, fixing accessary etc.complete of size 365 x 525 x

400 mm or 375 x 520 x 400 mm including cutting cutting

holes and making goods the same including labour, material,

trasportation etc.complete as directed by engineer incharge.

[12] Providing & Fixing Premium quality approved make like 3.00 Nos 5197.40

Jaquar / ESSCO or equivalent Flush Valve dual flow 40 mm

size having Conceled body with Exposed shut of provision and

100 mm square plate (3 to 6 liter per flushing)including

labour, material, trasportation etc.complete as directed by

engineer incharge.

[13] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 8.00 Nos 558.36

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

[14] Providing & Fixing Premium quality approved make like 5.00 Nos 3175.25

Jaquar / ESSCO or equivalent Bib cock with wall flange

including labour, material, trasportation etc.complete as

directed by engineer incharge.

[15] Providing and fixing 600mm x 450mm bevelled edge mirrror 3.00 Nos 833.73

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

[16] Providing and fixing C.P. brass towel rail comlete with C.P. 3.00 Nos 603.19

brass brackets fixed to wooden plugs with C.P. brass scews (B)

600mm x 20mm size.

[17] Providing and fixing pillar tap, capstan head, screw down high 10.00 Nos 308.73

pressure with screws, shanks and back nuts. (i) 15mm dia.

[18] Providing & Fixing Premium quality approved make like 4.00 Nos 2354.62

Jaquar / ESSCO or equivalent Angular stop cock with wall

flange including labour, material, trasportation etc.complete

as directed by engineer incharge.

[19] Providing laying and jointing in true line and level 15mm dia. 40.00 Rmt 72.65

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[20] Providing laying and jointing in true line and level 25mm dia. 40.00 Rmt 91.84

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. [B] 25mm dia.

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[21] Providing, laying and jointing in true line and level 75 60.00 Rmt 714.46

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

materials.

[22] Providing, laying and jointing in true line and level 110 90.00 Rmt 835.15

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

materials.

[23] Providing & Fixing Premium quality approved make like 2.00 Each 10108.59

Jaquar / ESSCO or equivalent Wall mixer having 3-in-1 system

with provision for both hand shower & over head shower

complete with 115 mm long bend pipe, connecting legs and

wall flange (excluding hand and over head shower) including

labour, material, trasportation etc.complete as directed by

engineer incharge.

[24] Both side laminate finish flush door.Providing Material & 25.20 Sqm 4057.17

Labour charge for making laminate finish Flush Door (finished

size of door is 40 mm) of size 975 mm x 2400 mm considering

waterproof flush door sheet of 38 mm thkness covered both

side by 1.0 mm thick Laminate supprted by SS -314 finish

hinges. All exposed framing of 65 mm x12 mm made by teak

wood bidding complete with polish. Finishing with all

necessary hardwares like handles, conceal mortise locks,

cylinders with 6 nos of keys, stopers, tower bolt, MS nails, SS-

314 screws etc. as per details given in drawing and as per

instructions of Architect/Engineer In charge. Please see the

Attached Make List for Apporoved Makes.

[25] Excavation for foundation upto 1.50mt.Depth including 5.00 Cum 149.67

sorting out and stacking of useful materials and disposing of

the excavated stuff as directed with in all lead & Lift (B) Dense

or Hard soil

[26] Providing and laying controlled cement concrete M-150 and 2.00 Cum 4107.67

curing complete including the cost of form work and

reinforcement concrete work in:(a) Foundation footing base

of column and mass concrete.

[27] Brick work using common burnt clay building bricks having 9.00 Cum 4289.33

crushing strength not less than 35 Kg./ Sqm. in cement mortar

1:6 (1 cement : 6 Fine sand) in super structure above plinth

level upto All floor level (Conventional)

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[28] 20mm thick sand faced cement plaster on walls upto height 18.00 Sqm 335.65

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) with 1cm x 1cm

groovs as per pattern sample approved by the engineer

incharge etc. complete.

[29] Blinds assemblies are to be supplied & installed in all 30.00 Sqm 1878.60

windows with great precision. It should be water resitant and

fitted on alluminium headrails duly power coated and fitted

with stainless steel drive rods. Manual operated and should

have ISI mark.Providing & fixing roller type window curtains

of Deck, Aerolux, Siddhi or eq. make including same brand

channel - chain mechanism, synthetic black out fabric of

approved colour & design, silver coated backside, same fabric

plated pelmet etc. with all necessary fittings etc. complete as

per Architect/ Site engineer's instructions as per sized

per engineer in charge and chief architect.

[30] Rehabilitation of RCC member in RCC structure for the 75.00 Sqm 3941.02

building, height upto 15.00 m above ground level with cement

concrete as per following operation and direction of Engineer-

in-charge (i)Building up of the concrete sections in layers not

exceeding 10 mm thick, including trowelling with wooden

tools etc with Polymer modified cement morter (with water

cement ratio not more than 0.40 in the proportion of 1:5:15 (1

part Polyalk EP of M/S Sunanda Speciallity CoatingsPrivate

Ltd or of equivalent approved brand and manufacture :

parts of cement : 15 parts of coarse sand) by weight including

necessary operation of mixing the morter by Mechanical

means and casting by dashing or hand packing or by

shuttering of the requisite shape and size to achieve compact

concrete section of the shape and size to existing R.C.C

members upto thickness of 70 mm.

(a) Providing and erecting temporary engineered steel

tubular standard double scaffolding system on the exterior

side of the building, maintaining it in a serviceable condition

for the required duration as approved and removing it

thereafter. The scaffolding system shall be stiffened with

bracings, runners, connection with the building etc with

suitable working platforms at required locations with

essential safety features for the workmen etc complete as per

directions and approval of Engineer-in -charge.

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

(b) Relieving structural members such as beams, columns,

slabs of their superimposed loads partially or fully as directed

by provision of adjustable steel props, frames etc including

providing necessary timber, runners, planks, bracing, jacking

up arrangements including M.S tubular steel double

scaffolding & working plateforms at all required levels etc for

all heights upto 50 metres etc and covering of all openings on

inside face to prevent entry of any material, debris etc and

providing protective covering only external side to avoid

splashes etc as per direction of Engineer-in-charge.

(c) Removal of cement plaster spalled, loose and disintegrated

concrete upto the required depth till sound concrete is

available, including exposing the reinforcement all round and

disposal of dismantled rubbish to the dumping ground by

mechanical transport where permitted by Municipal

Corporation/ Municipality/Nagarpalika.

(d) Chipping off existing loose, damaged, cracked concrete

etc.from RCC members i.e. columns, beams, slabs etc upto

6mm beyond reinforcement, carefully by chiesel and hammer

including cleaning the surface of the cement concrete and

rusted reinforcement by mechanical wire brush or by any

other established method and finally remove the loose

materials, rust and dirt with air blowing or by water jetting

(e) Providing and applying anti corrosive rust remover

"Rusticide" of M/S Sunanda speciality coating Pvt Ltd or

equivalent of approved brand and manufacture after cleaning

the same with wire brushe and water jet or air blowing.Apply

the solution with cotton waste swab to reinforcement as per

manufacturer's specification (f)Supplying and fixing steel

reinforcement of approved make including cutting, bending,

fabricating, making dowel, hooks, rings, providing spacers,

plastic or steel chairs, supplying binding wires including

binding or welding including wastage etc.complete as per the

specifications and as directed by Engineer-in-charg and shall

be paid separately.The rate is excluding drilling the hole in

RCC work and providing shear connectors as directed and

fixing the shear connecter with epoxy grouting and making

opening in slab when and wherever required (g) Application

of a coat of cement slurry made of Polyyalk Fixoprime of M/S

Sunanda Speciality Coating Private Ltd or Dr. Fixit or

equivalent of approved brand and manufacture as per

manufactures specification in the weight proportion 1:1 (1

Polyalk FP : 1 Cement) or in the required proportion as per

the manufactures specifications all around the old

reinforcement or new reinforcement treated as under (e)

above (The second coat shall be applied after a period of six

hours)(h) To ensure proper bonding between old and new

concrete application of bonding coat of slurry made of Polyalk

EP of M/S Sunanda Speciallty Coating Private Ltd of Dr. Fixit

or equivalent approved brand and manufacture in the weight

proportion of 1 :2 (1 cement : 2 Polyalk EP) or as per

manufactures specification over the cleaned and dried old

concrete surface Operation under (i) should be executed

before setting time of the operation under (h).

Description of Item

Item Rate In

(with brief specification and reference to book Quantity Unit Amount

No. Figure

of specifications)

[31] Removing dry or oil bound distemper by a washing and 1849.00 Sqm 12.58

scraping and sand papering the wall surface smooth including

necessary repairs to scratches complete.

[32] Applying two coats of putty & two coats of primer of approved 790.00 Sqm 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

[33] Wall painting (three coats) with plastic emulsion paint of 1261.00 Sqm 124.68

approved brand and manufacture on undecorated Walls &

ceiling surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

[34] Finishing wall with water proofing cement paint of on wall 588.00 Sqm 88.77

surfaces (Three coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

[35] Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' 73.00 Sqm 1484.61

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing

with flush pointing in white cement.

Total Rs.

I/We am/are willing to carry out the work at…..........… % above/below percent (Should be written in figures

and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit of Dismantal Material amount of Rs. NA must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be done as

per statement attached with specification

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division Kheda R & B Division

Nadiad Nadiad