Providing of Hot line for PHC Kunzer under District Capex Budget 2024-25

Amount

Supply , Transportation and errection of 11MTR long ST Poles (410 SP-56) completely errected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit. (as per REC Standard)

Supply , Transportation and errection of 9MTR long ST Poles (410 SP-33) completely errected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit. (as per REC Standard)

Supply,Carraige upto site,, laying ,stringing, tensioning , binding of ACSR Weasel Conductor, (30 mm2 ACSR Conductor) as per REC standard.

Supply, transportation and fixing of GI Channel /Angle Iron for Cross Arms, Braces, Transformer Belt, F-Top, Collers etc for Sub Station and poles (Complete Job including Nuts & Bolts and Washers)

Supply and fixing of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply and fixing of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm with fitting

Earthing of Poles Complete by Spike earthing Rod 20mm 2.5mtr long with GI strip 25x3mm (as per REC Standards)

Cement bottoming of S.T poles in 1:2:4 mix 1/6th of the height of pole below the ground and 1ft above the ground cylnerical shape with circular radius 9” from the pole centre) using 40mm crushed stone aggregate mix. As per Drawing 0.48 cum/polePit =( 600x600x1600)& Tappered at the Top. (as per REC standard) for 9 MTR ST Pole

Poviding and Painting of ST Poles with one coat of red oxide and two coats of aluminum paint to give an even shade using anti corrosive paint of standard brand (Nerolac/ Asian) paints) including cost of paint along with stamping on poles showing therein name of the firm date, year of instllaiton and the debitable head etc.

Supply, Carriage up to site, Installation, testing and Commissioning of danger Plates

Supply, Carriage up to site, Installation, testing and Commissioning of anti-climbing devices with clamps

Supply, Carriage up to site, Installation of G.I nuts and bolts etc.

Supply, Carriage up to site, Installation of Suspension/Tension Clamp with eye hook

Supply, Carriage up to site, Installation of 11 kV Heat Shrinkable Outdoor Cable Termination Kit ( 3 core) suitable for HT cable 50 mm sq

Supply, Carriage up to site, Installation of 3-Core XLPE HT Cable 50mmSq.

Supply, Carriage up to site, Installation of Anti-Climbing GI Barbed wire binding with Clamps at a distance of 30 to 40 cm at a height of 3.5 to 4m from ground level, At-least 2 kgs GI barbed wire (12 SWG) is to be used per pole for the purpose.

Supply, Carriage up to site, Installation, testing and Commissioning of Sundry items like Aluminium lugs, Jumpers, Binding tapes etc.

Pre, during and post execution geo tagged photographic evidence consisting of 5x7 inch photographs in coffee table book (covering each pole/Sub Station)

GULMARG ELECTRICALS AND SUPPLIERS (BID ID -2274227)

M/S HAMRAH ENTERPRISES (BID ID -2274284)

M/S BHAT ELECTRICAL & ELECTRONICS (BID ID -2274221)

ABDULLAH AND CO (BID ID -2274515)

MIR ELECTRICAL ENGINEERING WORKS (BID ID -2257647)