GENERAL

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) BMW-I.221

Supplying & fixing oval shape basin white (520x410mm)parry or equivalent (BMW-I.129)

Supply and Fixing of steel body tap 12.7 mm (1/2") Indian Make heavy duty including all type of necessary charges etc., complete as per SS (BMW-E.09)

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap (BMW-D.13)

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 (BMW-D.33)

Supplying & Fixing of concealed stop cock 12.7mm (1/2") Indian make heavy duty (BMW-E.03)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes 6 Kgs/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding Excise duty and Sales Tax etc.

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category I. (ELEC-3.8.16)

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : As per list of recommended brands. (ELEC-5.1.3)

stepped type Electronic Regulator.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks and inlcuding labour charges

Supply of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. ELEC-1.5.2

Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for Submersible Motors. ELEC-1.6.3

Supply of 16A flush type Swich. Makes: GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega ELEC-1.7.1

Supply of 16A flush type Socket with shutter.Makes: GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega ELEC-1.7.1

Supply of 12 Modular Vertical Cover Frame.Makes: Legrand Myrius / Cabtree Thames Platinum / GMZicono/ Goldmedal(Curve/Air)/ Million / Logus / GIFA / CPL/ Panasonic Vision / Salzer S 90 Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/ AMRON ELEC-1.8.3

Supply of 8 Modular Vertical Cover Frame.Makes: Legrand Myrius / Cabtree Thames Platinum / GMZicono/ Goldmedal(Curve/Air)/ Million / Logus / GIFA / CPL/ Panasonic Vision / Salzer S 90 Series/Koncept(SAMRAT/QURA) /Polycab(Levana)/ AMRON ELEC-1.8.3

Supply of 125A 3 Pole MCCB,25 KA, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted. Makes: L&T / Schneider / Siemens / Hager ELEC-2.9.1

Carryout routine maintenance and servicing of LT.Cubical pannel board having approximately 15 to 22 Nos of switches cleaning with power blower and servicing the contacts, tightning the connection of incoming and outgoing cables, and checking the operating machanism for smooth functioning of switches and putting them in smooth working condition.ELEC-6.4.2

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)

Engaging of Plumber and Helper, Eletrician and Helper including of all type of charges etc., complete

Electrician ( Licensed )

Helper Electrician

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Construction of granular sub-base (GSB) by providing Well graded material for Grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.

Providing, laying, spreading and compacting graded HBG Crushed stone aggregate to Wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work. (RBR-SBBS-11)

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 (M30 Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.28 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge / culvert and construction joints, and curing of concrete slabs for 14- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Supply and Transportation of Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I. ELEC-5.4.11

Supply of INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation. 1.0 TR, 5 Star capable of delivering 12000 BTU/hr and above with operating on refrigerant R-32/ R-410A. Makes: As per list of recommended brands as category I. ELEC-5.5.2

Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick with standard GI ceiling angles, sections perimeter channels including cost and conveyance of all materials and labour charges etc complete BMT-M.51

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame BMT-N.88

Supply and fixing Aluminium Anodised Casement windows as per approved drawing with aluminium anodised sections of Series C Jindal Hollow sections and outer frame of 8804 of size 46 x 44 mm, Shutter frame of 8802 of size 44 x 46 mm and Mullion frame of 8803 of size 59 x 38 and glazing section of 4433 with plain clear float glass 6 mm thick fixed including supply and fixing aluminium powder coated 1 No.of casement friction stay hinges for each shutter, 1 Nos. aluminium handles of 150 mm for each shutter and all Labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including Labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work (BLD-CSTN-11-30) - 1 Sq.M.

Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S. 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including transportation but excluding all taxes.

Supply, Delivery and fixing of RCC plates including cost and conveyance of plates all type of labour charges etc., complete

Carting away the surplus excavated earth from the work site with a lead of 3 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.

Provision Towards Demerit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item