Loading…
Loading…
Tender Value
₹88.3 L
EMD Value
₹89,000
Closing Date
13 Mar 2026, 6:00 pmClosed
Deputy Municipal Commissioner (D)
Colour Work of Various Existing Properties of Hydraulic Department (ESR, UGSR And Booster House, Etc...) in East (Varachha) Zone-A, Surat Municipal Corporation.
282328
DMC/HYD/24/2025-2026,Work No.10
Open
Paints / Enamels
Surat
3 documents required · 3 mandatory
₹2,832
Commissioner, Surat Municipal Corporation
₹89,000
2 Mar 2026
2 Mar 2026
2 Mar 2026
13 Mar 2026
2 Mar 2026
1 Distempering two coats with oil bound washable distemper of
approved brand & manufacture & of required shade on wall surface to
give an even shade over and & including a priming coat of alkali
resistance primer of approved brand after throughly brushing the
surface to give an even shade after throughly brushing the surface free
from mortar droppings and other foreign matter and also including
preparing the surface even and smooth.
(A) Wall 10000.00 72.23 S.M.
(B) Ceiling 5000.00 80.35 S.M.
2 Painting two coats (excluding priming coat) on previously painted
wood & wood based surface with enamel paint to give an even shade 1000.00 45.18 S.M.
& surface incl. cleaning of all dirt, dust & other foreign matter.
3 Painting one coat (excluding priming coat) on Previously Painted steel
and other metal surface with synthetic enemal paint, burshing to give
an even shade including cleaning the surface of all dirt, dust and other
foreign matters.
For every subsequent coat Extra over item no.above 1000.00 38.18 S.M.
4 Providing & applying two coats of weather shield max paint (3 coats
may be required in case of darker colours.)of ICI Dulux or Apex
Ultima of Asian Paint including applying exterior acrylic primer coat
as per manufacturers specification and directions in shade and colour
approved by architects, on exterior surfaces of the building including
scaffolding, preparing the surface, watering, curing etc. complete and
as directed by the architects and manufacturers.
Surface Preparation :
surface is thoroughly clean, dry and free from all loose dirt, chalk,
grease, fungi, algae and flaking paint. This can be achieved by
brushing with a wire/ stiff coir brush, followed by water jetting if
required. Fill up all minor cracks and defects with white cement and
sand mixture in the ratio 1:3. For application on previously painted
wall, previous coatings of paint must be thoroughly scraped off and
Clean the surface thoroughly using wire brushes.
Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-
5 hours. Application of putty is not recommended. Minimum 4-6
hours duration is required between each coat of weather shield max
5 White Washing with lime on wall surface to give an even shade &
surface incl. throughly brooming the surface to remove dirt, dust
mortar drops & losse scales of lime wash & other foreign matter Two
(A) Wall 1000.00 12.41 S.M.
(B) Ceiling 1000.00 13.53 S.M.
6 Apply two coats of putty and two coats of primer of approved brand
and manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
matter and sand papered smooth
DESCRIPTION OF ITEM QUANTITY RATE UNIT AMOUNT
7 Wall painting (two coats) with plastic emulsion paint of approved
brand and manufacture on undecorated wall surface to give an even
shade including throughly brushing the surface free from mortar
droppings and other foreign matter and sand papered smooth.
8 Applying Priming coat over new steel and other metal surface after
over and including preparing the surface by throughly cleaning oil,
grease dirt and other foreign matter and scoured with brushed fine 1000.00 35.00 S.M.
steel wool, scrapers and sand paper with ready mixed priming paint
brushing red lead.
9 Painting two coat (excluding priming coat) on new steel and other
metal surface with synthetic enemal paint, burshing to give an even
shade including cleaning the surface of all dirt, dust and other foreign
10 Applying Priming coat over new wood & wood surface after & incl.
preparing the surface by throughly cleaning oil grease dirt & other
foreign matter sand papering & knetting Really mixed paint brushing
priming for enamel.
11 Painting two coats (excluding priming coat) on New wood & wood
based surface with enamel paint to give an even shade & surface incl. 1000.00 88.45 S.M.
cleaning of all dirt, dust & other foreign matter.
12 Painting two coats of enamel paint (Excluding priming coat) over
previously painted wall after removing entire surface with even shade 1000.00 60.00 S.M.
& surface after removing dirt, dust foreign matter etc. comp.(M.R.)
13 Providing and applying Epoxy paint of approved make to concrete
surface for RCC ESR (inside the container) or any other structure
including clearing the surface by scrapping and air blowers to the
satisfaction of Engineer-in-charge necessary scaffolding etc. complete 40000.00 97.00 S.M.
with all leads including necessary testing as per IS code. For old
surface - 2 coats
14 Writing letter or figures on any surface with black japan paint
(stops,comas, hyphens and the like not to be measured and paid for Per Letter
separately)(i) Block (Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht
15 Writing letter or figures on any surface with black japan paint
Per Letter
(stops,comas, hyphens and the like not to be measured and paid for 1000.00 3.50 Per
separately) (ii) Indian (Letters/Figures)
16 Removing dry or oil bound distemper by a washing and scraping and
sand papering the wall surface smooth including necessary repairs to 10000.00 11.30 S.M.
scratches complete.
DESCRIPTION OF ITEM QUANTITY RATE UNIT AMOUNT
17 Providing and supplying safety hanging net of appropriate capacity /
dia. of rope and of suitable nylon quality which can withstand any
impact of human being etc. from the top of the tank and internal and
external periphery of ESR with necessary sufficient supporting
arrangement for. In short the arrangement should be such a way, that
the safety purpose shall be ensured with all respect during construction
period and the same can be taken back by contractor after completion
of the work duly concerned by Engineer in-charge.
18 Taking photographs of work in progress and submit with each RA
bill. Photographs shall cover details of locations of the activity of
work in progress. The Contractor shall submit photographs with
Album in a set comprising 2 (two) copies (size of photograph is 4" x
6") and a soft copy of the same. Work shall be carried out as per the
instruction of the Engineer-in-charge
19 Cutting out cracks of wall or terrace to V section ,cleaningout,
grouting with cement and sand slurry 1:3 (1 cement : 3 sand ). at any 100 65.23 RMT
20 Crack Repairs:-Crack filling using fiber reinforced polymer modified
mortar after openning crack in "V" grove, Making Surface dust free,
with a bond coat of polymer as per the data sheet for crack repairing
cracks less than 8mm (market rate)
21 Colour washing with lime on wall over & incl. a primary coat of white
washing to give an even shade & surface incl. throughly brooming the
surface to remove all dirt, dust mortar drops & loose scales of lime
wash & other foreign matter.Two coats.
(A) Wall 5000.00 12.41 S.M.
(B) Ceiling 5000.00 14.65 S.M.
22 Distempering two coats on previously distempering wall (without
primer) with oi bound washable distemper of approved brand &
required shade on wall surface to give an even shade after throughly 1000 57.59 S.M.
brushing the surfaces clean of all grease, dirt loose places of sceles &
also including preparing the surface even and smooth.
23 Polishing with french polished on New wood & wood based surface to
give an even surface incl. cleaning the surface of all dirt, dust & sand 1000 135.70 S.M.
papered smooth incl. a cost of wood filler.
24 Polishing with french polished on previously polishing wood & wood
based surface to give an even surface incl. cleaning the surface of all 1000 69.84 S.M.
dirt, dust & sand papered smooth incl. a cost of wood filler.
25 Scaffolding:-Providing, erecting and Dismantelling safe H frame
and/or Pipe scaffodling including working platform for external area
of Bridge Pier to facilitate all work setc. completed. Measurement for 0 157.00 CUM
payment shall be considred as per Detail specification. (Height range
from 2 to 7 mt approx.. or as per site condition)
TOTAL AMOUNT (Rs.) :-
TOTAL AMOUNT (Rs.) :-
Hydraulic Engineer
Surat Municipal Corporatioin
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01_Vol-I.pdf
02 Vol-II.pdf
03_Vol-III.pdf
Sch-B Colour.pdf
GAD OF ESR E5 27 LAC. LIT-0.pdf
GAD OF ESR-E3 24LAC.LIT.pdf
GAD-01A Drawing_ESR-E8.pdf
Download all tender documents and submit your bid