Providing/Supplying of furniture of Munsiff Court Billawar and Addl. Special mobile magistrate Billawar.

Judge Chair hi-Back Chair-Overall size-W-670 mm, D-650 mm, H-1340/1200 mm Seat size-W-500 mm, D-550 mm, H-480 mm. Uphollstery : Fire retardant leather lite. Foam : high density moulded foam. Mechanism : 4 position synchronized mechanism. Base : Aluminum die cast base. Caster : Cater heavy duty wheel with bifma compliance. Armrest : Aluminium die cast with cushion. (LMR)

Officer Chair Hi-Back- Size: Height Overall/Seat - Max:1240/535mm, Min: 1160/455mm, Depth - 625mm, Width- 650mm : 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density PU cushion. Available in only Black Latherite.(LMR)

Judge Table with side runner with drawer pedestal:- Overall Dimention: 1800x1900x760 mm Ht. Top made of pre laminated particle board with pvc edge beading. Understucture also made up of pre laminated particle board with pvc edge beading. Top- Size :- 1800x900x36 MM thk. Pre Laminated Particle Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Modesty- Modesty made up of 25 MM thk. Pre Laminated Particle Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Under Structure- L Shape Side Leg made of 36 MM thk. Pre Laminated Particle Board. Skirting made of 25 mm thick PLPB. Top mounted on skirting which provided a clean & finished look. Cable duct made up of 18 mm thick PLPB. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of Particle board covered by 2 mm thick PVC Edge beading by Through Feed Machine. Side Table- 1000x450x640mm. Top made of 36 mm thick Prelaminated Particle Board. Under structure made of 18 mm thick Pre Laminated Particle Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Wooden Pedestal- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. Special drawer slides for filing drawer. Other drawers on roller slides. Cap & Levellers- 12 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.(LMR)

Table with side runner with drawer pedestal :-Overall Dimention: 1800x1900x760 mm Ht. Top made of pre laminated particle board with pvc edge beading. Understucture also made up of pre laminated particle board with pvc edge beading. Top- Size :- 1800x900x36 MM thk. Pre Laminated Particle Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Modesty- Modesty made up of 25 MM thk. Pre Laminated Particle Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Under Structure- L Shape Side Leg made of 36 MM thk. Pre Laminated Particle Board. Skirting made of 25 mm thick PLPB. Top mounted on skirting which provided a clean & finished look. Cable duct made up of 18 mm thick PLPB. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of Particle board covered by 2 mm thick PVC Edge beading by Through Feed Machine. Side Table- 1000x450x640mm. Top made of 36 mm thick Prelaminated Particle Board. Under structure made of 18 mm thick Pre Laminated Particle Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Wooden Pedestal- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. Special drawer slides for filing drawer. Other drawers on roller slides. Cap & Levellers- 12 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.(LMR)

Visitor Chair- Specification-Size-H--890 mm, Seat ht:- 430 mm, D:- 450-mm, W:- 470 mm. Anti lever CRCA frame fitted with Nylone molded back fitted with Mesh cloth. Armrest single Piece PP molded. Lumber support. Ergonomic design. (LMR)

Low Back Reader Chair- Specification- Size-H:930-1030mm, Seat ht: 460-560mm, D-680mm, W-580 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes Fixed PP arm rest . Quality tapestry. High density Moulded PU cushion. (LMR)

Computer Chair- Specification- Size-H:930-1030mm, Seat ht: 460-560mm, D-680mm, W-580 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes Fixed PP arm rest . Quality tapestry. High density Moulded PU cushion. (LMR)

Office Chair:- Size- H: 1130-1230mm, Seat H: 500-600mm, D-550mm, W-630mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is Nylon fitted with Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism, with T type handle with PU pad. Quality tapestry. High density Moulded PU cushion. Upholstery 0.85 Mtr.(LMR)

Table for Advocates Extra Large:- Providing and Placing in posotion office table of size 1500 mm (L) x 750mm(W) x 750mm (H) having following configuration :- (i) 18mm thick table top made of post laminated ply board of grade-ii, type -ii of approved shade with the hot melt glue used for fixing the 2mm thick PVC edge banding (II) Table frame shall be made of prime quality 3 drawer provider on the side (iii) 3 Drawer pedestal is made of 18mm thickply.(LMR)

Dice for Advocate:- Overall Size:- Length:1800mm, Width: 900mm, Height: 750mm, Top made of 35 mm thick Pre-laminated pertical Board. PVC edge beading of 2 mm edges by Through Feed Machine. Leg's made of 25mm thick Pre-laminated pertical Board. PVC edge beading of 2 mm edges. Modesty and Shelf made of 18mm thick Pre-laminated pertical Board. PVC edge beading of 2 mm edges.(LMR)

Table Top Elevator:- Acrylic Table Top Elevator Acrylic Writing Desk with Adjustable Height Slant Book Reading Stand Portable Laptop Table Writing Pad (Small Size 16x12 Inches) Premium 8mm Thickness(LMR)

Sofa Set:- Providing and placement of 3 seater sofa with Overall Size 1750mm(W) 740mm(D) 760(H). Seat Ht 410mm. Handle Ht- 610mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Outer foam 5 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm. (LMR)

Centre Table:- Overall Dimension: 900 X 600 X 450 H mm • Made up of High Moisture Resistant 25mm Thick Prelaminated Partical Board • One side laminated, Color matching to running Color Scheme. • Edges finished with 2mm self glued hot pressed PVC Edge Biding by Rehau or equivalent. • Base will be in Trirod Pattern as shown in image • Made up of mild steel round bright bars finished with Powdercoating • Powder coating of all the metal units must be of 70 micron tank process with oven baking coat by polyster powder coating. • Partical – Associate Brand or Equivalent. (LMR)

Book Rack:-Racking Main Single Side- Providing and placement of library Book rack with Overall Dimensions shall be 900mm(W)x380mm(D)x2180mm(H). Rigid Knockdown construction . Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides. Provision for acrylic pouches. Stack ability shall have add-on units width wise to form a bank of racks having common side panel. Bottom plus five fixed racks making total 6 storage levels. Shelf made of 1 mm thick CRCA Sheet. Each Shelf is provided with stiffener at bottom for strength. Uniformly distributed load capacity per each full shelf is 80 Kg. maximum. Back panel made of 18 mm thick PLPB. These are to support books on the rear side. Cap & Levellers- 4 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. (LMR)

Fire extinguisher (LMR)

Almirah:- Size:-height:1980mm width:910mm depth:485mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.4 adjustable shelf. Three way locking device with six levers superior quality lock for Door. Doors are mounted on steel hinge brackets. Body 22 Gauge, Door 20 Gauge. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph.(LMR)

Fire Proof Almirah( godrej) :- Standard Height of Fire Resisting Record Protection Cabinet with a tolerance of ± 35mm 1600 millimeter Fire Resisting Rating of Fire Resisting Record Protection Cabinet 120 Minutes Designation FR-120X1600 Outer Body Material Thickness 1.6 millimeter Inner Box Material Thickness 1 millimeter - The cabinet door is made from mild steel or galvanized steel sheet of not less than 0.8 mm and not more than 2.5 mm nominal thickness and shall be firmly hinged to the cabinet by hinges in such a way that door can be opened upto 180 deg. The door of the fire resisting record protection cabinet shall be of double wall type with insulating material filled in-between. The insulating material should not produce toxic gases when the cabinet is exposed to fire situation. The components shall be assembled by bolting, welding, riveting or by any combination of these methods. Door Material Thickness 1.6 millimeter Type of Lock Dual Control Lock, Number of Adjustable Shelves- 4,Type of Painting Polyurethane Paint (LMR)

Big Almirah :- Size:-height:1980mm width:910mm depth:485mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.4 adjustable shelf. Three way locking device with six levers superior quality lock for Door. Doors are mounted on steel hinge brackets. Body 22 Gauge, Door 20 Gauge. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. (LMR)

Office Chair Normal:- Low Back- Specification- Size-H:930-1030mm, Seat ht: 460-560mm, D-680mm, W-580 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes Fixed PP arm rest . Quality tapestry. High density Moulded PU cushion. (LMR)

Meeting Room Chair High Quality:- BT Meteor Hi Back chair Overall Size - Height-1290/1190mm, Width-620mm, Depth-650mm, Seat Height-490/590mm, Seat Size-W-490mm x D-490mm,features a breathable mesh back with integrated lumbar support, adjustable headrest, and cushioned seat for all-day comfort. It is designed with a 3D armrest for adjustable positioning, a strong nylon base for durability, and smooth-rolling casters for easy mobility. The chair includes a synchro-tilt mechanism with position lock, height adjustment for personalized seating, and a sleek modern design suitable for office or home use.(LMR)

Computer Table :- Compins-main unit- Size: Length:- 900mm, Width:-450mm, Height:-750 mm. Top- Size :- 900x450x18 MM thk. Pre Laminated Particle Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.. Under Structure-C- Frame & Tubular cold rolled close annealed Steel Structure. Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe. Fabrication involves only MIG welding process. Cable tray - . CRCA sheet 0.8 MM Thk dotted embossed tray. Tie members & Foot rest- Crca section 25x50x1 MM thk.for rigid joint of frame structure. K.B.tray-Metal key board tray with mouse paid Ebco made with Black powder coated. CPU stand-Rem

Steel Rack:- Overall size shall be 905 (W) x 448 (D) x 1800 (H). The thickness of angles should be 1.8mm & should be made up of rolled formed construction, free from twist, sharp edges & burrs. The angle should be 40 x 40 mm with thickness of 1.8mm. Angles should have holes provided at a pitch of 19.05mm & should start at 19mm centres from each end. Shelves should be 4 in number of 905mm length & should be bend type made from mild steel sheets not less than 1.00mm thickness. All metal surfaces/parts shall be given antirust treatment & shall be powder coated with epoxy polyester powder. Material shall be supplied in shrink wrap packing to avoid any damage during transit.(LMR)

Wooden Tale for Staff :- TM-1200- Supplying and Fixing Office Table 1200mm W X 600mm D X 750mm H WorktopM

ade from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC edge band all around, Understructure PLB made of 18 mm thick pre laminated particle board. with Fixed Pedestal.(LMR)

Sofa Set:- Providing and placement of 2 seater sofa with Overall Size 1270mm(W) 740mm(D) 760(H). Seat Ht 410mm. Handle Ht- 610mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Outer foam 5 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm. (LMR)

Steel chrome plated Visitor Bench - 3 seater- Over all sizes- 1765mm X 710mm X 775mm (L X W X H). 3- Seater visitor bench with 3 individual seats of 450 mm. width.Made of MS cold rolled close annealed press formed Sheet components duly seamless welded to get proper finish. Steel perforated MS moulded one piece seat and back fitted in moulded chrome plated side strips. three individual seats fitted on MS tube support of 75mm x 35mm. seat and bottom support are Powder coated. The open- ends of the pipes will be covered& finished. All joints will be properly welded & finished. The whole structure including seats are powder- coated. Appearance as per attached photograph.(LMR)

Notice Board:- Top quality natural surface Aluminium frame The board has light weight Aluminium Frame with Satin-finish anodizing for contemporary looks and maximum rigidity. Ensures Documents Stay Securely Pinned. Color: Green| Size: 2 X 3 Feet.. Wall fastening kit included Dimensions: 900 x 1200 mm (LMR)

Crunch Mats:-Material Ethylene Vinyl Acetate Soze: 55L x 55W Centimeters, SIZE: Each Tile = 3.5 Square feet; 16 Tiles = 56 square feet ; 12 mm thickness. DURABILITY Moisture-resistant and heat-insulating, Washable. (LMR)

Foldable Wheel Chair for Handicaped: - High Quality strong embossed vinyl seat and backrest, 24 Inch imported tubeless rear wheel with bearings. 8 Inch imported tubeless front caster with bearings, Powder coated finish, ABS Armrest, Strong Impact footrest and hand rims. Double brake system, Seat width 18" inches Seat height from ground 18" inches,Seat depth (front to back) 17" inches,Back rest height 17" inches Total Width 26" inches,Total Height 36" inches,Total length 41" inches,(LMR)

Steel chrome plated stool- Supplying and fixing of stool with Overall Dimension:Diagonal Leg Dia 538 mm H470mm, plate:SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. Seat base:seat base is made of MS ring and rectangular tube. Screw: Round Hub:The hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the legs and it should accommodate and cover the lead screw mechanism. Leg Powder coating:All metal components should be pre treated with zinc phosphating in 7 tank porcess and then powder coated with anti microbial epoxy polyster powder coating . All welding should be Co2 argon welding to minimise rusting on the welding areas. Working load:Safe working load must be 135kg . (LMR)

Chair Prisma With Handle- Size:-Overall H: 830mm,Seat h: 460mm,D: 530mm,W: 560mm: Back polypropylene material. Seat cut foam with tapestry. Frame oval tube 13x31-16 Gauge, Under Structure made of MS cold rolled close annealed capsule pipe frame 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Seat are made of 12mm thick Hot pressed ply wood with high density PU foam, Back rest -PP seat with upholstered with fine quality fabric. With powder coated. (LMR)

Roller Blinds:- Providing and fixing of Roller blinds with composition of 100% polyester with Smooth operating roller rods of approved shade and quality. (LMR)

Wooden Partition of High Quality (LMR)

Wooden Stand for Coat Hanging:- Dimention: 38D x 60W x 113H Centimeters, Finish Types Lacquered, Material Teak wood (LMR)

Curtains with Rod :- 3 Steel Rod and 10 curtains price inlude with rod (LMR)

Witness Deposition Box:- Overall size - 900mm. x 900 mm.x 1200 h. Providing & fixing witness box base made on 18 mm ply finished with 1 mm laminate with necessary hardware & vinyl flooring on top with wooden pole & witness Deposition platform. (LMR)

Computer Cum Office Table:- Size:- Length:1200mm, Width: 600mm, Height 750mm. C– Frame Leg 200 mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Fabrication involves only MIG welding process. Top- Size :- 1200x600x25 MM thk. Pre Laminated Particle Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Modesty- 380 mm ht., 0.8 MM Thk. CRCA sheet Perforated panel at visitor’s side. Duct- Dotted embossed cable Duct of size 1058x150x0.8 MM thk. CRCA sheet for wire management purpose. Side frame- C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Top & bottom channel Crca press formed section of 30x50x1.6 mm thk. Levellers- 4 nos of flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. (LMR)