Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 LRejected-Finance | ₹1.3 L | L1 | Rejected-Finance RATES OFFERED BY THE BIDDER WAS 40.43 PERCENT HIGHER THAN THE ESTIMATE |
| 2 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-NOT MEETING PQC |
| Sl No | Description | Qty | Unit | UNIVERSAL ENGINEERS L1 |
|---|---|---|---|---|
| 1.00Supply of Heavy-Duty Pillar Type Drilling Machine on Door Delivery Basis to HBL Sugauli Plant, East Champaran, Bihar as per below technical specifications: | ||||
| 1.01 | Supply of Heavy Duty Pillar Type Drilling Machine: The bidder shall supply Heavy Duty Pillar Type Drilling Machine meeting or exceeding the following minimum technical specifications and scope of supply as mentioned in the Special Terms & Conditions:
Type: Heavy Duty Pillar Type Drilling Machine
Drilling Capacity in Steel: 40 mm
Drilling Capacity in Cast Iron: 44 mm
Tapping Capacity in Steel: M25
Spindle Taper: MT-4
Number of Spindle Speeds: 08 Nos.
Spindle Speed Range: 100, 170, 260, 430, 550, 980, 1560 & 2520 RPM
Spindle Travel: 200 mm, Feed Type: Manual
Fine Feed Attachment: Required
Column Diameter: 112.60 mm, Column Length:1400 mm
Maximum Distance Between Spindle Centre & Column Face: 380 mm
Maximum Distance Between Spindle Nose & Table: 570 mm
Maximum Distance Between Spindle Nose & Base Plate: 1020 mm
Vertical Travel of Working Table: 400 mm
Working Table Size: 430 mm × 430 mm, Slot Size in Working Table: 1/2 inch
Base Plate Size: 700 mm × 450 mm, T-Slot Size in Base Plate:5/8 inch
Working Surface of Base Plate: 430 mm × 360 mm
Electric Motor: 1.5 HP, 1440 RPM, V-Belt Size: B-65
Approximate Machine Weight: 400 Kg
Make/Brand: : PA Drill Model 38/37PPD or equivalent approved make such as HMT, Batliboi, Macpower, Bosch, Taparia, Pathak, or Bharat Machine Tools meeting all technical specifications stipulated in the tender. | 1 | NOS. | 1,05,500 ₹1,05,500 Lowest |
| 1.02 | DRILL VICE 6" FOR ABOVE | 1 | NOS. | 10,000 ₹10,000 Lowest |
Tender Value
Refer Docs
Closing Date
29 Jun 2026, 3:00 pmClosed
CHIEF MANAGER PURCHASE
PATNA BIHAR
SUPPLY OF HEAVY-DUTY PILLAR TYPE DRILLING MACHINE ON DOOR DELIVERY BASIS AT HBL PLANT SUGAULI, EAST CHAMPARAN, BIHAR
2026_HPCLB_279385_1
HBL/TEN/PUB/26-27/050
Open Tender
Mechanical Tools and Equipment
Supply
15 days
SUGAULI EAST CHAMPARAN BIHAR
AS PER ATTACHED TENDER DETAILS
2 documents required · 2 mandatory
₹0
Exempted
19 Aug 2026
1 Jun 2026
30 Jun 2026
1 Jun 2026
29 Jun 2026
1 Jun 2026
1 Jun 2026 - 21 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply of Heavy-Duty Pillar Type Drilling Machine on Door Delivery Basis to HBL Sugauli Plant, East Champaran, Bihar as per below technical specifications: | |||||
| 1.01 | Supply of Heavy Duty Pillar Type Drilling Machine: The bidder shall supply Heavy Duty Pillar Type Drilling Machine meeting or exceeding the following minimum technical specifications and scope of supply as mentioned in the Special Terms & Conditions:
Type: Heavy Duty Pillar Type Drilling Machine
Drilling Capacity in Steel: 40 mm
Drilling Capacity in Cast Iron: 44 mm
Tapping Capacity in Steel: M25
Spindle Taper: MT-4
Number of Spindle Speeds: 08 Nos.
Spindle Speed Range: 100, 170, 260, 430, 550, 980, 1560 & 2520 RPM
Spindle Travel: 200 mm, Feed Type: Manual
Fine Feed Attachment: Required
Column Diameter: 112.60 mm, Column Length:1400 mm
Maximum Distance Between Spindle Centre & Column Face: 380 mm
Maximum Distance Between Spindle Nose & Table: 570 mm
Maximum Distance Between Spindle Nose & Base Plate: 1020 mm
Vertical Travel of Working Table: 400 mm
Working Table Size: 430 mm × 430 mm, Slot Size in Working Table: 1/2 inch
Base Plate Size: 700 mm × 450 mm, T-Slot Size in Base Plate:5/8 inch
Working Surface of Base Plate: 430 mm × 360 mm
Electric Motor: 1.5 HP, 1440 RPM, V-Belt Size: B-65
Approximate Machine Weight: 400 Kg
Make/Brand: : PA Drill Model 38/37PPD or equivalent approved make such as HMT, Batliboi, Macpower, Bosch, Taparia, Pathak, or Bharat Machine Tools meeting all technical specifications stipulated in the tender. | 1 | NOS. | - | - |
| 1.02 | DRILL VICE 6" FOR ABOVE | 1 | NOS. | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
UNPRICEDBID050.pdf
Tender Documents • 1.31 MB
BOQ_326142.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .