ADDITION/ ALTERATION/ IMPROVEMENT TO CERTAIN MD ACCN AT AF STN BAKNAUR AND KALPI UNDER GE (AF) AMBALA

Amount

Taking down cement plaster of any description on brick walls/ceiling etc including racking out joints, backing hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness and rubbish off the premises complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M & L for providing 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded mechanically crushed stone aggregate) finished even and rough as in toping layer for laying floor tiles, complete all as specified and directed.

M & L for 20-22 mm thick kota stone slab as in floor, machine cut bedded and jointed and pointed with grey cement slurry including cutting and mirror polish laid with 3.0 kg of cement per sq metre over & including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per BOQ srl item No. 5.00 here-in-above but in vertical surface such as skirting, dado and pillar laid with 3.0 kg of cement per sq. metre over & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Marble work 20 mm thick (550mm long X 75mm wide strip) as in border in flooring,over 20 mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with white marble including rubbing, grinding and polishing complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection, floors and like finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

M&L for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4), complete all as specified and as directed.

M & L Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks, complete all as specified and directed.

M & L for 10mm thick cement plaster in CM 1:6 finished even and smooth w/o using extra cement on fair faces of brick work or concrete surfaces, complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 2% by wt of cement finished even and smooth without using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

M&L for PCC 1:2:4 type B-0 as in benching, coping, roof kerbs, mud stop etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone stoneagg) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the similar items, complete all as specified and directed.

M&L for Form work to side and soffits of floor beam, lintels cantilevers shelves including supports over hangs etc.for rough finished surfaces of concrete flat, complete all as specified and directed.

M&L for Form work to edges of concrete flats RCC/PCC band exceeding 5 cm but not exceeding 10 cm for rough finished surfaces of concrete flat, complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed not less then 0.90mm dia, complete all as specified and directed.

All as per BOQ srl item No. 18.00 here-in-above but 6mm to 8mm dia complete all as specified and directed.

M&L for 5 mm thick cement plaster in CM 1:3 on ceiling concrete surface facia chajja roof projection etc finished even and smooth w/o using extra cement, complete all as specified and directed.

S & F 25mm dia aluminum anodised depreved rod powder coated teak wood textured finish and wall thickness 1 mm including brakets complete designed and patterned as approved by Engr-In-Charge, complete all as specified and directed.

M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper including priming plastered and other surfaces with alkali resistant priming paint over a coat of wall care putty to make surface even and smooth, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper including wall care putty where ever required to make surface even and smooth, complete all as specified and directed.

M&L for preparation for new plastered / concrete wall surfaces, etc. and for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over (camouflage pattern if reqd) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl providing over a coat of wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed

M&L for complete removal of existing treatment of wall and preparation of old plastered or Un plastered surfaces of wall and for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over (camouflage pattern if reqd) and including providing over a coat of wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed

M&L for Two coats of white wash on ceiling surfaces incl preparation of new plastered surfaces, complete all as specified and directed.

M&L for Two coats of white wash on ceiling surface incl preparation of old plastered surfaces, complete all as specified and directed.

M&L for Two coat of cement base paint over a coat of primer including preparation of new plastered or unplastered surfaces of wall over a coat of wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for Complete removal of existing treatment and applying two coats of cement base paint over a coat of alkali resistance primer including preparation of old surfaces of wall over a coat of wall care putty complete all as specified and directed by Engr-in-Charge.

Taking down steel tubing 15 mm bore and connections,including cleaning for refixing or removal to store, complete all as specified and directed.

Taking down steel tubing 20 mm bore and connections,including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore GI tubing mediumgrade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

S&F 20 mm bore GI tubing mediumgrade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exc 10CM girth.complete all as specified and directed.

Refixing old steel tubing 15 mm bore and connections in new or old position, complete all as specified and directed.

Refixing old steel tubing 20 mm bore and connections in new or old position, complete all as specified and directed.

S & F Stainless steel plate rack of Size 78.74 cm x 76.2 cm x 25.4 cm complete all as specified and directed by Engr-in-Charge.

S & F Soap dish vitreous china white, size 160X160X90mm fixed in repair, complete all as specified and directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and directed.

S & F Corner Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed.

S & F in repair CP grating 125mm dia as in repairs with or w/o circular hole for inserting waste pipe, complete all as specified and directed.

S & F in repair PVC connection 15mm bore with PTMT nuts and washer 45cm long complete all as specified and directed.

S & F in repair PVC connection with nuts and washers brass CP as in repairs 600 mm long complete all as specified and directed.

Disconnecting existing PVC water tank of capacity exc 250 litres, but not exceeding 500 litres (fixed on roof), setting aside (or lowering if required), cleaning, removing all scales, dirt from tanks, from mouths of circulating pipes, etc., and hoisting / re-fixing / re-connecting in same / new position, writing date of cleaning with white paint, (height / size of letters / figures not less than 10 cm in height, refixing serviceable ball valve, complete all as specified and as directed.

S & F in repair 20mm bore stop valves cast copper alloy screwed down each high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F Angle stop cock, of 15mm bore chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

Dismantling old unserviceable RCC/PVC water tank of capacity exc 250 but n. exc 500 ltrs cpacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with 20mm ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

Dismantling of AC/CI/PVC pipes jointed in neat cement mortor and taking out of trenches/wall if required, etc complete all as specified and directed.

S&F in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 110 mm size, with oval and access door, complete all as specified and directed.

S&F in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 75 mm size, complete all as specified and directed.

Supply and fixing in repairs UPVC floor/ Nahani trap with PVC grating suitable for 75 mm external dia, type-B pipes, ISI marked including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia, type-B pipes, ISI marked complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including fixing clamps, complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls,complete all as specified and directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls ,complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide & not excceeding 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

M&L, for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for coloured glazed ceramic tiles of size350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in neat cement slurry and pointed in colour cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but not exceeding 4sqm each complete all as specified and as directed.

S&F mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410E, Gde E-250 complete all as specified and as directed. Note :- Flat iron hold fasts shall be measured & paid separately.

M&L for Mild steel plain black 1.25mm thick sheet in steel gates and similar work , cut to size, fixed to steel framing gates with plain 40mm lap joint with welded or riveted complete all as specified and directed.

S & F pressed steel frames of size 125 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges lock strike plate, Single action spring hinges etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-0 (using 12.5mm graded mechanically crushed stone aggregates) as in filling the chowkats/frames complete all as specified and as directed.

S&F 35mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

S&F Second class hardwood Glazed and skeleton shutters, 35mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S & F Aluminium anodised cast type handles 150mm long complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and directed.

S&F Butt hinges 100 mm size, medium weight, cold rolled mild steel complete all as specified and directed..

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old wooden surface and applying one coat of synthetic enamel paint, of surface, over 10 cm width or girth, complete all as specified and directed.

S&F mild steel door shutter two leaves made out of 0.80 mm MS sheet, all round with frame of angle or other sections with/ including gusset plates, rails braces, hold fast, bolts, screws etc , and leaves of 21 gauge MS sheet as per godrej pattern as in almirah, with three way of locking arrangement with and including brass lock with dupllicate keys , steel CP handle 200 mm long , drilled for fixing of steel sheeting or other covering door etc complete conforming to Fe 410-00 (Gde E-250) quality 'A' including one shop coat of red oxide primer over two coats of spray painting door with frame, including making the disturbed surfaces fair and smooth with cement concrete, cement slurry, plastering etc as required, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever iron brackets(painted with anti rust paint) and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m including 32 mm PVC waste pipe, complete all as specified and directed.

S&F steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, including gauged and glazed Skelton shutter 30mm thick, complete with glazing bars dovetailed or welded including MS fillets, welding of 10 mm guard bars and one coat of red oxide primer and two coats of synthetic enamal paint over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specifed and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specifed and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones, complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0, complete all as specified and directed.

M&L for Cutting holes brick walls built in cement mortar exceeding half brick thick wall but not exceeding one brick thick wall built in cement mortar for inserting hold fasts etc and making good the dismantled portion in plain cement concrete 1:2:4 type B1 & finished to match as per the existing finish complete all as specified and as directed. Note:- This item shall not be operated if hold fast holes are required at new location.

S&F 300mm Mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed

Demolition of brick work built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Cement concrete 40mm thick type B-0 1:2:4(using 12.5mm graded mechanically crushed stone aggregate) in floor/sub base complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour, including 15mm thick screed bed (1:6),complete all as specified and directed.

M&L for brick work except bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified and directed.

M&L for preparing newly plastered surface and applying two coats of distemper oil emulsion on wall over a coat of putty complete all as specified and directed.

M&L for preperation of new plastered surface of ceilings and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint white or tinted over a primed plastered and other surfaces with alkali resistant priming paint,complete all as specified and directed.

M & L for complete removing by mechanical means old treated external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint, including filling wall putty in minor holes/depressions, sand papering etc, including repair of plastering patch each not more than 0.25 Sqm, incl border blue(apex), complete all as specified & as directed by Engineer-in-Charge. Note : (i) The item rate should include for work upto 15 Mtr height. (ii) Cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and directed

M & L for preparing existing treated surfaces on walls/ceiling by filling wall putty in depressions, minor holes and cracks sand papering etc and making the surface smooth and applying 01 coat with oil bound distemper (light shade) by using roller to wall surfaces, complete all as specified and directed. Note : (i) The item rate should include for work upto 15 Mtr height. (ii) Cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate.

S&F in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed.

S&F vitreous china wash down water closet pan floor mounting (pedestal pattern/EWC) P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, anti syphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover, complete all as specified and directed.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs, 15 mm bore Brass CP mixer for Wall fitting, and for wash hand basin, mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F machine crafted box type cabinet for kitchen using 18-19 mm thick PVC board both side laminated with and including all necessary fitting and fixtures to install wire basket , shutter shall be fixed by using full overlay MS clips on hinges high quality nickle plated satin finish size- 101 mm -150 mm ,02 Nos per leaf ,including all fittings ,channels , 150 mm s/s handles complete all specified and directed . NOTE:- (i)Wire basket shall be measured separetely. (ii)Front area of box shall be considered for payment purpose. (iii) Depth of box shall be equal to the width of cooking platform.

S&F wire basket made of top quality 304 grade stainless steel, nickle chromium plated ( Ni 4%) of Approved design and pattern complete all as specified and directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames not exceeding 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by insrting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably scruwed suppling & fixing in opening, complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Taking down of shutters only any description exceeding 1.0 Sqm but not exceeding 2.00 sqm complete all as specified and directed.

S&F Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness of size 105mmX60mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc complete all as specified. Note :- Disturbed portion of existing floor /wall / tile / plaster etc during fixing of chowkhats shall be repaired to match with existing finish .Cost of the same Shall be deemed to be included in this item

S&F 35 mm thick, 2nd class hardwood rail and style plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated and complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, ISI marked overall length of cover plate 140 mm fixed in floor with standard aluminium screws complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars etc complete all as specified and directed.

M&L for Mild steel, 300 mm, helical door spring including roller and roller plate, ISI marked, complete all as specified and directed.

S&F in repair Door closer aluminium (dia cast) body hydrau?lically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410W (grade-E 250) quality-A complete all as specified and as directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing Fe-410- W(Gde?E-250) quality?B (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed.

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws / L type or J type hook complete all as specified and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash all as required and directed by the Engr-in-Charge.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC concealed Conduit with fixing accessories for one light /fan/bell point controlled by one switch with Modular Metal Box and Modular cover plate incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed.

One light /fan/bell point controlled by one, switch, complete all as specified and directed.

One 5 pin 5/6 Amp socket on the same board, complete all as specified and directed.

One 5 pin 5/6 Amp socket on independent board, complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm, complete all as specified and directed.

M&L for point wiring with FR PVC insulated and unsheathed cable 4Sqmm (Nominal area) stranded copper conductor single core including ISI marked 20mm (minimum) or on higher size as per required dia medium grade PVC conduit for point wiring, concealed in wall / metal flush boxes including white cover plates and frame for mounting switch/socket (modular) with all accessories including 4Sqmm FR PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 20 Amps AC switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge. Notes: Cost of cutting chasing on wall, making good to facing where reqd and pointing in cement mortar 1:3 all as per site condition. shall be deemed to be included in quoted rate of this item.

S & F modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed.

S & F modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed.

S&F ceiling rose polycarbonate body, 65 x 20 mm three terminal complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for MCB SPN as incomer complete all as specified and directed.

S&F MCB TPN 40 to 100 Amps 415V 10 KA B Curve including allterminals , fittings etc. complete all as specified and directed.

S&F MCB SPN 32 Amps 240V 10 KA B Curve incl all terminals , fittings etc. complete all as specified and directed.

S&F MCB SP 6-32 Amp ,240 V 10 KA B Curve incl all terminals , fittings etc complete all as specified and directed.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly all as specified. Note. Two run of 0.6Sqmm cable and one run of PVC conduit and one run of 0.6Sqmm cable earth continuity wire shall be measured as one run complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion. Note : (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO. (ii) On testing, if the desired earth resistance is not obtained, enitre earthing shall be re-done by contractor till the desired earth resistance is obtained without accruing any extra cost to the government. (iii) The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F Indoor Decorative wall brackets, champagne gold finish fixture with plastic body suitable for 09/11W LED Bulb complete with 9/11 W LED Bulb complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

S & F Metal clad single pole and a neutral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp,240V complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

SWAMI ENGINEERS

MARKANDESHWAR BUILDERS AND GOVT CONTRACTORS