Loading…
Loading…
Tender Value
₹65.0 L
EMD Value
₹1.3 L
Closing Date
15 Jul 2026, 1:00 pm
Similar tender results from the same govt authority in the past 3 years.
Repair to staff quraters at VPDA, MOG, SPP, SDG, DES, & AYRN under jurisdiction of SSE/Wroks/SPP.
SEE26-27-69
SEE26-27-69
Open
9 Months
Unknown (Unspecified Location)
₹0
₹1.3 L
22 Jun 2026
22 Jun 2026
1 Jul 2026
correction as per (Schedule A) Annexure "A-1" except steel reinforcement.
All items in connection with works under CPWD-DSR-2021 schedule with up to date correction as
per (Schedule A) Annexure "A-1" except steel reinforcement.
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
2.32 Clearing grass and removal of the rubbish up to a Sqm 6571 7.4 48625.4
1 distance of 50 m outside the periphery of the
5.0 REINFORCED CEMENT CONCRETE
5.12S PRE-CAST RCC
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
5.12 Providing, hoisting and fixing above plinth level cum 4.5 9673.5 43530.75
up to floor five level precast reinforced cement
concrete work in string courses, bands, copings,
bed plates, anchor blocks, plain window sills and
the like, including the cost of required centering,
shuttering but , excluding cost of reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)
derived from natural sources : 3 graded stone
aggregate 20 mm nominal size derived from
natural sources).
6.0 MASONRY WORK
Brick work with common burnt clay F.P.S. (non
6.1 modular) bricks of class designation 7.5 in
foundation and plinth in:
Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V
level in all shapes and sizes in :
6.12S HALF BRICK MASONRY
Half brick masonry with common burnt clay
F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to
8.0 CLADDING WORK
Providing and fixing 18 mm thick gang saw cut,
mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity
counters, window sills, facias and similar
locations of required size, approved shade,
colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand),
joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing of edges
to give high gloss finish etc. complete at all
Granite stone slab of colour black, Cherry/Ruby
8.20S STONE WORK DRY CLADDING
8.31 Providing and fixing Ist quality ceramic glazed Sqm 189 1063.45 200992.05
wall tiles conforming to IS: 15622 (thickness to
be specified by the manufacturer), of approved
make, in all colours, shades except burgundy,
bottle green, black of any size as approved by
7 Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per
sqm, including pointing in white cement mixed
with pigment of matching shade complete.
9.0 WOOD AND P.V.C. WORK
Providing and fixing panelled or panelled and
glazed shutters for doors, windows and
clerestory windows, fixing with butt hinges of
required size with necessary screws, excluding
panelling which will be paid for separately, all
complete as per direction of Engineer-in-charge.
(Note:- Butt hinges and necessary screws shall be
paid separately)
9.7.8 Fly proof stainless steel grade 304 wire gauge Sqm 230.4 1521.6 350576.64
8 with 0.5 mm dia. wire and 1.4mm wide aperture
with matching wood beading
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Providing and fixing 25 mm thick shutters for cup
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) non-
decorative type, core of block board construction
9.21 with frame of 1st class hard wood and well
matched commercial 3 ply veneering with
vertical grains or cross bands and face veneers
on both faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel Sqm 20 2015.75 40315
butt hinges with necessary screws
9.40S MISCELLANEOUS-WOOD WORK
Providing and fixing M.S. grills of required
pattern in frames of windows etc. with M.S. flats,
square or round bars etc. including priming coat
with approved steel primer all complete.
9.48.2 Fixed to openings /wooden frames with rawl Kg 2100 197.7 415170
plugs screws etc.
10.0 STEEL WORK
Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc.,
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer,
including welding and bolted with special shaped
washers etc. complete.
11.0 FLOORING
11.2 Dry brick on edge flooring in required pattern Sqm 480 733.3 351984
with bricks of class designation 7.5 on a bed of
12 12 mm mud mortar, including filling joints with
local sand, with common burnt clay non modular
Cement concrete flooring 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate) finished
11.3 with a floating coat of neat cement, including
cement slurry, but excluding the cost of nosing
of steps etc. complete.
11.3.1 40 mm thick with 20 mm nominal size stone Sqm 558 545 304110
11.5 62 mm thick cement concrete flooring with Sqm 718.83 928.65 667541.48
concrete hardener topping, under layer 50 mm
thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal
size) and top layer 12mm thick cement hardener
consisting of mix 1:2 (1 cement hardener mix : 2
graded stone aggregate, 6mm nominal size) by
volume, hardening compound mixed @ 2 litre
per 50 kg of cement or as per manufacture's
specifications. This includes cost of cement
slurry, but excluding the cost of nosing of steps
11.37S CERAMIC GLAZED TILES
11.37 Providing and laying Ceramic glazed floor tiles of Sqm 115.08 935.6 107668.85
size 300x300 mm (thickness to be specified by
the manufacturer) of 1st quality conforming to IS
: 15622 of approved make in colours such as
White, Ivory, Grey, Fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 Cement : 4
Coarse sand), Jointing with grey cement slurry @
3.3 kg/sqm including pointing the joints with
white cement and matching pigment etc.,
11.41S VITRIFIED FLOOR TILES
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
11.41 make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
s q m including grouting the joints with white
cement and matching pigments etc., complete.
12.0 ROOFING
Providing, fixing and embedding sand cast iron
accessories for rain water pipes in the masonry
12.40 surrounded with 12 mm thick cement mortar of
the same mix, as that of masonry (lead caulking
will be paid for separately):
Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes conforming to IS :
12.41 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for
thermal expansion, (i) Single socketed pipes.
Providing and fixing on wall face unplasticised -
PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.
12.42.4 Single tee without door
12.42.5 Bend 87.5 degrees
12.50 Providing and fixing precoated galvanised iron Sqm 280 671.55 188034
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with
zinc coating 120 grams per sqm as per IS: 277,
in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester
top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to
avoid scratches during transportation and should
be supplied in single length upto 12 metre or as
desired by Engineer-in-charge. The sheet shall
be fixed using self drilling /self tapping screws of
size (5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required.
13.0 FINISHING
13.4S CEMENT PLASTER (IN COARSE SAND)
13.4 12 mm cement plaster of mix :
CEMENT PLASTER WITH A FLOATING COAT OF
12 mm cement plaster finished with a floating
coat of neat cement of mix :
13.16S 6MM CEMENT PLASTER
13.25 Extra for plastering:
13.26 Providing and applying plaster of paris putty of 2 Sqm 1502.8 214.3 322050.04
24 mm thickness over plastered surface to prepare
the surface even and smooth complete.
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Distempering with 1st quality acrylic distemper
(ready mixed) having VOC content less than 50
13.42 gms/litre, of approved manufacturer, of required
shade and colour complete, as per
manufacturer's specification.
Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade :
Lettering with black Japan paint of approved letter
brand and manufacture per cm
Distempering with 1st quality acrylic distemper,
having VOC (Volatile Organic Compound )
content less than 50 grams/ litre, of approved
brand and manufacture, including applying
additional coats wherever required, to achieve
even shade and colour.
Applying priming coats with primer of approved
13.85 brand and manufacture, having low VOC (Volatile
Organic Compound ) content.
Painting with synthetic enamel paint of approved
13.99 brand and manufacture of required colour to give
an even shade :
Re-lettering with black Japan paint of approved letter
brand and manufacture. per cm
Finishing walls with Acrylic Smooth exterior paint
of required shade :
13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 Sqm 4350 74.75 325162.5
14.0 REPAIRS TO BUILDING
14.75AS ROUTINE MAINTENANCE WORK
Providing & fixing White vitreous china water
closet squatting pan (Indian type) along with "S"
or "P" trap including dismantling of old WC seat
and "S" or "P" trap at site complete with all
operations including all necessary materials,
labour and disposal of dismantled material i/c
malba, all complete as per the direction of
Engineer-in charge.
14.82 Dismantling W. C . Pan of all sizes including Each 10 110.7 1107
disposal of dismantled materials i/c malba all
complete as per directions of Engineer-in-
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
14.86 Providing and laying in situ seven course water Sqm 288 615 177120
proofing treatment with APP (Atactic poly-
propylene) modified Polymeric memberane over
roof consisting of first coat of bitumen primer @
0.40 litre per sqm, 2nd, 4th & 6th courses of
bonding material @ 1.20 Kg/sqm, which shall
consist of blown type bitumen of grade 85/25
conforming to IS : 702, 3rd and 5th layers of
roofing membrane APP modified Polymeric
membrane 1.5 mm thick of 2.25 Kg/sqm weight
consisting of five layers prefabricated with centre
core as 20 micron HMHDPE film sandwiched on
both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron
HMHDPE film. 7th, the top most layer shall be
finished with brick tiles of class designation 10
grouted with cement mortar 1:3 (1cement : 3
fine sand) mixed with 2% integral water proofing
compound by weight of cement over a 12 mm
layer of cement mortar 1:3 (1 cement : 3 fine
sand) and finished neat (item of laying brick tiles
shall be paid for separately).
15.0 DISMANTLING AND DEMOLISHING
Demolishing cement concrete manually/ by
mechanical means including disposal of material
within 50 metres lead as per direction of
Engineer - in - charge.
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 67.84 2007.1 136161.66
equivalent design mix)
15.56 Dismantling old plaster or skirting raking out Sqm 1502.8 45.05 67701.14
joints and cleaning the surface for plaster
including disposal of rubbish to the dumping
ground within 50 metres lead.
18.0 WATER SUPPLY
18.54S PTMT FITTINGS
Providing and fixing PTMT bib cock of approved
quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not Each 250 109.85 27462.5
less than 88 gms
Providing and fixing PTMT pillar cock of approved
quality and colour.
weighing not less than 120 gms
Schedule Schedule A 3-items of steel reinforcement under DSR-2021.
Item- 01 items of steel reinforcement under DSR-2021.
S No. Item No Description of Item Unit Qty Rate Amount
5.0 REINFORCED CEMENT CONCRETE
5.22S STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete upto plinth
5.22.6 Thermo-Mechanically Treated bars of grade Fe- Kg 1023 89.65 91711.95
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
PolicyRBCE6dt.17.05.2004.pdf RB POLICY
ATTACHMENT
B.Gsubmissionguideline_.pdf
ATTACHMENT
TelecomCircular9-2023.pdf
ATTACHMENT
ApprovedTenderDocument-69.pdf
ATTACHMENT
PolicyRBCE6dt.17.05.2004.pdf
ATTACHMENT
Download all tender documents and submit your bid