Providing Inset End Lights for Provision of RESA of Dimension 240MX90M at Calicut International Airport_ SH_SITC of various capacity CCRs and Mimic Panel System for GLF system at Calicut International Airport

Amount

Design, Fabrication, Supply, Installation, Testing and Commissioning of floor mounted LT power supply panel made out of 14 SWG CRCA sheet steel totally enclosed, weather, dust, vermin proof, IP-42 protection, cubical type, compartmentalized, with aluminium bus bar having 250A current rating, suitable for operation at 415V, 3phase, 4 wire, 50Hz, AC system complete with accessories, making connections and interconnections, mechanical interlocking for incomers, terminal blocks for termination of cables with top/bottom entry as per site conditions, locking arrangement, painting.. etc. including the following accessories as per technical specifications and drawing as approved by engineer-in- charge . Incomer: 250 Amps, 4 Pole MCCB, 35 kA breaking capacity, having Thermal Magnetic Release, spreader bars, with rotary handle - 2 Nos (RED, YELLOW, BLUE) - 2 Nos Outgoing: 63 Amps, 4 Pole MCCB, 35 kA breaking capacity, having Thermal Magnetic Release, spreader bars, with rotary handle - 9 Nos (RED indication for indicating status of MCCB)-9 Nos 100 Amps, 4 Pole MCCB, 35 kA breaking capacity, having Thermal Magnetic Release, spreader bars, with rotary handle - 1 Nos (RED indication for indicating status of MCCB)-1 Nos 100 Amps, 4 Pole MCCB, 35 kA breaking capacity, having Thermal Magnetic Release, spreader bars, with rotary handle - 1 Nos (RED indication for indicating status of MCCB)-1 Nos Three phase Volt Meter (Digital LED type) of class 1 accuracy in each phase for incomming MCCBs - 2 Nos

Suypply, Installation, Testing and Commissioning of indoor type air cooled constant current regulator suitable for use on input supply voltage 415 +/- 10% 50Hz, output power with tapping and output current as detailed below with 5 steps current variation suitable for local and remote control operation with 24V/48V/ DC control supply with complete digital output ammeter (0-30 or 0-10Amps) over current, open circuit earth fault protections, earth leakage meter & positive back indication equipments with complete 5kV grade current transformer 20/10/1 Amps, relay contacts as required and as per AAI specification. a)30 kW, 20 Amp CCR

Suypply, Installation, Testing and Commissioning of indoor type air cooled constant current regulator suitable for use on input supply voltage 415 +/- 10% 50Hz, output power with tapping and output current as detailed below with 5 steps current variation suitable for local and remote control operation with 24V/48V/ DC control supply with complete digital output ammeter (0-30 or 0-10Amps) over current, open circuit earth fault protections, earth leakage meter & positive back indication equipments with complete 5kV grade current transformer 20/10/1 Amps, relay contacts as required and as per AAI specification. a)4 kW, 6.6Amp CCR

Installing following size of departmentally supplied perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders/structure / laying on wall including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supply and Installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders/structure/laying on wall including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 2 mm thickness

Supply of PVC insulated, round wire armoured copper conductor stranded control cable of 2.5 sqmm size 44 core conforming to IS:1554 (Part-I) with upto date amendments etc., complete as required.

Supply of PVC insulated, armoured copper conductor stranded control cable of 1.5 sqmm size 8 core conforming to IS:1554 (Part-I) with upto date amendments etc., complete as required.

Supply of XLPE insulated PVC innersheathed, armoured aluminium conductor under ground power cable of 1.1 KV grade of following size conforming to IS:7098(Part-I) 1988, with upto date amendments etc., complete as required. 3.5 x 50 Sq.mm

Supply of XLPE insulated PVC innersheathed, armoured aluminium conductor under ground power cable of 1.1 KV grade of following size conforming to IS:7098(Part-I) 1988, with upto date amendments etc., complete as required. 2 x 25 Sq.mm

Supply of XLPE insulated PVC innersheathed, armoured aluminium conductor under ground power cable of 1.1 KV grade of following size conforming to IS:7098(Part-I) 1988, with upto date amendments etc., complete as required. 3.5 x 25 Sq.mm

Supply of XLPE insulated PVC innersheathed, armoured aluminium conductor under ground power cable of 1.1 KV grade of following size conforming to IS:7098(Part-I) 1988, with upto date amendments etc., complete as required. 3.5 x 185 Sq.mm

Supply of XLPE insulated PVC innersheathed, armoured aluminium conductor under ground power cable of 1.1 KV grade of following size conforming to IS:7098(Part-I) 1988, with upto date amendments etc., complete as required. 3.5 x 240 Sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed control cable of 1.1 KV grade of following size on cable tray as required. a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed control cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size on cable tray as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size on cable tray as required. Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and Upto 95 sq. mm

Design, fabrication, supply, installation, testing and commissioning of wall mounted LT power supply panel of size 1m x 0.5m x 0.20 m (LxBxD) made out of 14 SWG CRCA sheet steel totally enclosed, with hinged doors, having DIN rail mounted termnination blocks suitable for 1.5 sqmm wires arranged two tier formation (100 connector blocks per tier), having facility for cable entry from top & bottom including glanding plates, painting etc.as per technical specifications and drawing as approved by engineer-in-charge .

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 185 sq. mm (57mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 240 sq. mm (62mm)

Supplying and making end termination with brass compression gland and copper lugs for 8 core 1.5sqmm following size of PVC insulated and PVC sheathed copper conductor cable as required.(suitable item no: 9 )

Supplying and making end termination with brass compression gland and copper lugs for 44 core 1.5 sqmm PVC insulated and PVC sheathed copper conductor control cable as required. (suitable for item no : 8 )

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 25 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 25 sq. mm (22 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 50 sq. mm (35mm)

Tracing out of dismantled/ damaged cable's from masonry open duct trench and removing the same from trench without damaging the existing power cable's stacking the dismantled cables in rolls on a suitable location and cleaning the trench from debris complete as required as per the instruction of engineer in charge.

Supply, Installation, testing and commissioning of Block MOV based Surge Divertor (BMOVSD)100 KA, 3 Phase, 4 wire with neutral protection in pre-wired IP55 grade powder coated metal enclosure complete with sensing circuit, potential free contacts, necessary indications and alarm for Non Essential Panel connect in parallel.Make: Tercel, Model: ISOSURGE or equivalent in approved makes of AAI.

NASU SYSTEMS

Manish Electricals