PROVN OF CERTAIN B/R AND E/M WORKS AT LEKHAWADA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors

At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

M&L for dismantling 9.0 Mtrs steel tubular pole and street lights by disconnecting electrical network , shifting the same to a distance not exc 50 mtr and fix the pole in a new place where directed includiing fixing of street light complete. Note- The rate also includes excavation for dismantling and refixing, breaking of PCC foundation and coping, Making of new PCC foundation and coping

M&L for taking out XLPE LT UG cable of size 10 sqmm/ 16 Sqmm 2 core carefully by disconnecing from electrical network and relaying the same cable in a new place where directed including connection complete Note:- Excavation and earthwork will be measured in respective item of this schedule

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth for laying of LT Cable etc.and getting out for soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm for soft/loose soil complete all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

M & L for dry Sand cushioning to underground cable with screened, washed river sand, including punning gently all as specified and directed. Note: - Thickness after punning will be measured for payment.

M&L for tubes light grade galvanised iron pipes of 40 mm sizes with all fittings and fixed to wall/ pole / under road / culvert / drain or laid in floors,complete incl taking the corroded all as specified and directed.

M&L new generation energy saving and environmental friendly long life 30 watt LED street light made up of pressure diecast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 fix on existing bracket. Make:- Havells Cat No ENDURAPEARLSL30WLED757SASYTOPCMP or Bajaj/HPL/Philips/GE or equivalent

S&F in repair LED bollard light13 watt 800mm , 5700K,IP-54 of Make-Philips, Item Code-PGR0301001 or equivalent and as directed by Engr-In-charge.

S&F Street Light Panel , Single phase, Maximum load 12 KW, Digital type including contactor rating 65A TP, MCB SPN 63 A and Digital 24 hour timmer complete

Supply and fix Rigid steel conduit stove enamelled black, welded 25mm dia with accessessories

M&L Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 ,9.0 metres long including 02 coats synthetic enamel painting over a coat red oxide primer complete all as specifed and directed Note:-Excavation, Earthwork, PCC for Foundation and Coping will be measured and paid separately in respective items of this schedule

Supply and fix GI pipe bracket for street light fittings, made out of 40 mm bore,light grade,1500 mm long, duly bend to shape and fixed to steel pole with 50x6 mm flat iron MS clamp and necessary nuts, bolts and washers complete all as specified and directed

Supply and fix PVC looping box(enclosures) of size 300x200x155 mm comprising of 02 Nos of aluminium bus bar 100 Amps rating, fixed on porcelain insulators, earthing terminals and one MCB SP 6/16 Amp complete

Supply & fix copper wire of size 2.5 sq mm single core, multi-strandred wire PVC indulated but unsheathed multistranded copper conductor of make : Plaza/Palycab/RR Cabel/Havells or equivalent

M&L for Cement concrete in foundations,filling and mass concrete in PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) for steel tubular pole and filling in road cutting etc. Complete all as specified and as directed

M&L for providing coping for steel tubular poles in PCC 1:3:6 Type- C1 (using 20 mm stone aggregate) including weathering, slightly rounded or chamfered angles and throating all as directed

Fabricate,Supply,Install,Testing and commissioning of self supporting totally enclosed mounted on Base channel of size 75 mm x 75 mm x5mm Indoor type LT Panel from CPRI certified Panel builder factory fabricated made out of not less than 2 mm thick CRCA sheet ,dust and vermin proof, hinged smoothly openable front and rear, with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip (32 x 6 mm) connecting provosion - 02 Nos, ventilation louvers, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc panel board suitable for 3 phase 4 wire ,415 volts 50 hz, panel size shall be suitable for mounting and including the following items complete all as specified and directed.

(i) MCCB wiith adjustable type 250 Amps 4P, 50 Hz, 415 Volts with rupturing capacity 35 KA-01 Nos (as incomer).

(ii)Aluminium Bus Bar of 350 Amp rating main bus @ 50 KA supported in suitable size porcelain strand lock with suitable size brass nut, bolt and washers with colour coded PVC sleaving for three phase and neutral -01 Set.

(iii) MCCB 160 A 4P, 50 Hz, 415 Volts with rupturing capacity 25 KA -02 Nos (out going).

(iv) MCCB ,63 A 4P,50 Hz, 415 Volts with rupturing capacity 25 KA-04 Nos (Outgoing)

(v) Resin cast current Transformer - 3Nos

(vi) Digital voltmeter - 1 Nos

(vii) Digital Ammeter - 1 Nos

(ix) LED Phase Indication Lamps for R,Y,B -3 Nos.

(xi) Earth bus of size 32 x 6 mm in the panel - 2 Nos

S&F TP&N Vertical DB 12 ways fitted with Bus Bars, Neutral Links, Blanking Plates suitable for 125 Amp MCCB as incommer and MCB TPN as outgoing(without MCCB & MCBs)

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 4 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge.

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 8 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge.

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 12 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge.

Supply and fix MCCB 63 Amp four pole ,415Volts with rupturing capacity 25KA , Adjustable Thermal & Fixed Magnetic Type

Supply and fix MCCB 160 Amp four pole ,415Volts with rupturing capacity 35KA , Adjustable Thermal & Fixed Magnetic Type

Supply and fix MCB TPN 32 Amp, 415 Volts 'C' Curve 10KA

Supply and fix MCB FP 63 Amp, 415 Volts 'C' Curve 10KA

Supply and fix MCB SPN 32 Amp, 415 Volts 'C' Curve 10KA

Supply and Fix MCB SP 6 to 32 Amp 'C' Curve 10KA

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5TR

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA

S&F in repair single pole and neutral enclosure with two pin and earth plug and socket with steel enclosure complete with one single pole MCB 20 Amps

M&L in repair to replacement of sub main wiring complete with PVC insulated cable of single core 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 2.5 Sq mm unsheathed multi stranded copper conductor as on earth wire. Note :- Two runs of single core cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

Supply, laying and testing cable XLPE insulated, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 spmm 2 core .

Ramdev and Sons

Shree Builders

OCEAN CONSTRUCTION

M/s Matadeen Ramchandra Agarwal

DMA PROJECTS

Electricals India