Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹39.3 L
EMD Value
₹40,000
Closing Date
25 Nov 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Shedhi Irrigation Division Nadiad
Construction 0f Precast Concrete RCC Box Culvert at ch 6434 mt of Savli Tank To Dahiyap To Anara To Luni River Drain.
364294
10 of 2026-27
Open
Civil Works - Others
Works
Nadiad
13 documents required · 10 mandatory · 3 optional
₹1,500
Executive Engineer Shedhi Irrigation Division Nadiad
₹40,000
6 Nov 2026
6 Nov 2026
6 Nov 2026
25 Nov 2026
6 Nov 2026
120 days
Bill Of Quantities
Name of work :- Construction 0f Precast Concrete RCC Box Culvert at ch 6434 mt of Savli Tank To Dahiyap To Anara To
Luni River Drain.
Quantity Unit Item Rate Per Amount
Dismantling the R.C.C. work and disposing off the stuff
Including stacking of the useful materials etc.complete as
52.50 Cum 750.90 Cum
directed.(a) Light Reinforcement(Mair bar upto
Dismentalling the existing R.C.C. pipes including sorting out
and stacking the useful material of the following diameter
25.00 RMT 577.60 RMT
including refilling the trenches etc. complete as directed. NP
Pipes 450 to 600 mm.
Excavation for foundation in all sorts of soil including yellow
sandy gravelly soils ,soft & hard murrum etc. in dry
condition including depositing the excavated stuff in uniform
layers in banks or as and where directed etc. complete for
lead upto 500 m and all lift.(BY MACHINERY) Including
Providing & Laying in position "NOMINAL MIX" cement
concrete using cement, sand and crushed aggregate by mass
and machine mix for C.C./R.C.C work incl. necessary
formworks centering, scaffolding, compaction by vibrator,
curing as directed with all lead & lift etc complete Without
Dewatering and excluding cost of steel reinforcement.
ITEM NO. 5(A) b
Providing & Laying in position "DESIGN MIX" cement concrete
using cement sand and crushed aggregate for C.C./ R.C.C work by
"FLORI" including necessary formwork, centering, scaffolding,
compaction by vibrator, curing as directed with all lead & lift etc
34.50 Cum complete without dewatering and excluding the cost of steel 4012.50 Cum
(A) For Footing of column / Abutment / Pier / Bottom slab of
barrel / Plinth course / Coping/Approach slab etc.
(b) Concrete grade M-15 and MSA-40 mm
ITEM NO. 5(A) a
Providing & Laying in position "DESIGN MIX" cement concrete
using cement sand and crushed aggregate for C.C./ R.C.C work by
"FLORI" including necessary formwork, centering, scaffolding,
compaction by vibrator, curing as directed with all lead & lift etc
57.50 Cum complete without dewatering and excluding the cost of steel 4190.00 Cum
(A) For Footing of column / Abutment / Pier / Bottom slab of
barrel / Plinth course / Coping/Approach slab etc.
(a) Concrete grade M-15 and MSA-20 mm
ITEM NO. 5(A) e
Providing & Laying in position "DESIGN MIX" cement concrete
using cement sand and crushed aggregate for C.C./ R.C.C work by
"FLORI" including necessary formwork, centering, scaffolding,
compaction by vibrator, curing as directed with all lead & lift etc
18.00 Cum complete without dewatering and excluding the cost of steel 4651.00 Cum
(A) For Footing of column / Abutment / Pier / Bottom slab of
barrel / Plinth course / Coping/Approach slab etc.
(e) Concrete grade M-25 and MSA-20 mm
ITEM NO. 5(B) e
Providing & Laying in position "DESIGN MIX" cement concrete
using cement sand and crushed aggregate for C.C./ R.C.C work by
"FLORI" including necessary formwork, centering, scaffolding,
compaction by vibrator, curing as directed with all lead & lift etc
complete without dewatering and excluding the cost of steel
105.00 Cum reinforcement. 4344.00 Cum
(B) For Pier and Abutments / Wing wall / Head wall / Return
wal/Dowel wall etc.
(e)Concrete grade M-15 and MSA-40 mm
ITEM NO. 5(E) n
Providing & Laying in position "DESIGN MIX" cement concrete
using cement sand and crushed aggregate for C.C./ R.C.C work by
"FLORI" including necessary formwork, centering, scaffolding,
compaction by vibrator, curing as directed with all lead & lift etc
complete without dewatering and excluding the cost of steel
(E) For Column / Beam / Solid Slab of Road Bridge / Barrel /
(n) Concrete grade M-25 and MSA -10 to 20mm
Providing & Placing in position reinforcement bars including
cutting, bending, welding joints where necessary, hooking etc.
complete as per drawing for all lead and lifts.
Providing and laying in position 110 mm dia (6 kgf/sqcm) P.V.C.
Pipe for weep holes with non corroding jali in abutments, wing
48.00 RMT walls, retaining walls etc. complete. 262.50 RMT
Back filling the foundation trenches around the structures etc with
99.00 Cum selected excavated stuff including watering, ramming, compacting 36.90 Cum
etc. complete. (By Machinery)
Providing and Erecting a "W" metal beam CRASH BARRIER
comprising of 3 mm thick corrugatedsheet metal beam rail, 70 cm
above road/groundlevel fixed on ISMC series channel vertical
post,150x 75 x 5 mm space 2.00 m centre to centre 1.80 mhigh
1.10 m below ground/road level fixing at site shall be in C.C. M-20
block of size 50 x 50 x100 cms for each post. All steel parts and
fitments to be galvanized by hot dip process, all fitting to conform
IS: 1367 and IS: 1364 metal beam rail to be fixed on the vertical
50.00 Meter post with a pacer of section 150 x 75 x 5 mm 3.30 m long complete 4864.70 Meter
as per MORTH Clause 810.Rates including providing and fixing
mm thick ACM type reflactor 100 mm wide, type 4, class-B, High
inensity grade sheeting between two 'W' metal beam throught and
reflactive unit at the top of vertical post as per IRC:67-2012 etc.
complete as per detailed drawing and directed by engineer-
in charge.(Metal beam crash barrier for approch)
Design, Manufacturing & Supplying factory- made RCC (wet cast)
Precast Box Culvert category for use in Road Crossing, stormwater
drainage, cable trenching, or utility ducts, having dimensions of
Width x Depth (in mm) (In to In dimension) and with varies length,
with a load carrying capacity of 70R with minimum earth cushion
200mm for heavy vehicle movement. Box culvert shall have
interlocked plug socket arrangement. Rubber gasket required to
ensure water-tight character and for jointing of each segment
flange-bolt connection with 12 mm diameter, 50 mm length Grade-
8.8 high tensile bolts with zinccoating and round washer or
equivalent nut- bolt connection will be supplied as part of the Box
36.00 Rmt culvert. The drains shall be manufactured using minimum M-50/C- 54854.00 Rmt
40 grade concrete duly steam cured for durability, OPC 53 Grade
cement with admixtures as per IS:456-2000, and coarse and fine
aggregates derived from natural sources. Reinforcement shall be
with TMT/TMX bars of Fe 500D or higher, conforming to IS:1786,
fabricated using in- house automated cage-making units for
consistency. RO water shall be used during manufacturing to
enhance durability. The factory shall be certified with ISO
(Quality Management), ISO 14001 (Environmental Management),
and ISO 45001 (Occupational Health & Safety) 2000x2000 MM
(250 mm all four thickness)
( For R.A. attached)
Providing temporary all weather and fair weather diversion
suitable for traffic during the construction period of the bridge
1.00 No. including providing necessary drains and all safty measures 41749.80 No.
( For R.A. attached)
Proving Drone Videography before , on going and after
1.00 Job 4000.00 Job
Construction of work as per instruction of engineer in charge
(Rupees ThirtyNine Lacs ThirtyTwo housand Eight Hundred Ten and Ninety paisa Only/-)
I / We am / are willing to carry out the work at………………..% above / below precent.
(Should be written in figure and words) of the estimate reates mentioned above.
Amount of my / our tender works out as under.
Estimated amount put Estimated amout put
to tender rs……………. to tender Rs……………..
Deduct …………..% Add………………%
below Rs………… Above Rs……………
Net Rs……………….. Total Rs…………….
In words…………………………….. In words…………………………………
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for
which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design
4 the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned
in all the tender.
Notes 1 - All work shall be carried out as per Public Works Department Handbook and specifications of Division or as directed by supervisory staff.
Notes 2 - The persons of firm submitting the tender should see that the all the columns in the schedule should be filled in inkand total of entries in last
column should be struck by the contractor under his signature.
Notes 3 - Rates quoted include clearing of site (prior commencement of work and at its close ) in all respects and hold good for work under all conditions,
site, moisture, weather etc.
Note 4 - The meaning of abbreviationss used in units are as under. Hact - Hactare MT - Metric Tonne Rmt = Running metre
Note 5 - Basic Rate for Cement Difference Calculation of Mix Design will be Rs. 5483.37/M.T. (Rate as per CGWRD SOR 2023-24)
Signature of agency Tender Clerk Deputy Executive Engineer
Shedhi Irrigation Division Drainage Sub Division
Executive Engineer Divisional Accoutant
Shedhi irrigation Division Shedhi Irrigation Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01. SBD Box Culvert 6434.pdf
02. Sch -B Box Culvert 6434.pdf
03. Item wise technical specification_compressed.pdf
04. General and item wise specification.pdf
Drawing 01.pdf
Tender Notice No.10 of 2026-27.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .