Electrical work in new power system lab at old EMU office

Amount

Electrical work in new power system lab at old EMU office

Wiring for circuit/ submain with 2 X 6 sq. mm + 1X 6 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Wiring for circuit/submain wiring along with earth wire with 4 x 10 sq.mm + 2 x 6 sq.mm of FRLS PVC insulated copper conductor, single core cable with surface/ recessed suitable size medium class PVC conduit etc. as required.

Wiring for circuit/ submain with 4 X 6 sq. mm + 2X 6 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and making end termination of suitable size for the submain wiring with suitable copper lugs for 2 x 6 sq.mm + 1 x 6 sqmm of PVC insulated copper conductor.

Supplying and making end termination of suitable size for the submain wiring with suitable copper lugs for 4 x 10 sq.mm + 2 x 6 sqmm of PVC insulated copper conductor.

Supplying and making end termination of suitable size for the submain wiring with suitable copper lugs for 6 x 6 sq.mm of PVC insulated copper conductor.

Supplying and fixing of 3 phase 8way (8 +24),Double door surface/recess mounting ,vertical type ,415V,TPN MCB distribution board of sheet steel, dust protected,duly powder painted,inclusive of 200A tinned copper bus bar,common neutral link,earth bar,din bar for mounting MCBs(but without MCBs and incomer) as required.

Supplying and fixing 16 way,Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of 20 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall / floor and making good the same in case of recessed conduit as required.

Supplying and fixing of 25 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall / floor and making good the same in case of recessed conduit as required.

Supplying and fixing of 32 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall / floor and making good the same in case of recessed conduit as required.

Supplying and drawing 3 numbers 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed PVC conduit as required.

Supplying and drawing 3 numbers 2.5 sq.mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed PVC conduit as required.

Supplying and drawing 3 numbers 4 sq.mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed medium class PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket otlet and 5/6A modular switch, connections etc. as required.

Supplying and fixing 6 pin 15/16 A modular socket (3 module) outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 15/16 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 4 Module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 8 Module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 12 Module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 3 pin 5/6 A modular socket outlet on existing modular plate, including connections etc. as required on the existing DLP trunking.

Supplying and fixing 5/6 A modular switch on existing modular plate, including connections etc. as required on the existing DLP trunking.

Supplying and fixing 6 Module frame, including connections etc. as required on the existing DLP trunking.

Supplying and fixing of DLP Plastic trunking of size 150 x 50 mm with clip on partitions (2 compartments), 2 Nos of 65 mm or nearest suitable width flexible cover including all accesories(joints , internal and external angles, endcaps , junctions etc.as per site condition) , fitted on the wall/floor with steel screws, cup washers etc. as required.

Supplying and fixing 20/25 A modular DP switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin 25 A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 1/2 module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 6 - 32 amps rating, 240 Volts, 'C' curve miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connectons, testing and commissioning etc as required.

Supplying and fixing 6 - 32 amps rating, 415 Volts, 'C' curve miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connectons, testing and commissioning etc as required.

Supplying and fixing 25 amps rating, double pole (Single phase and neutral) ,240 Volts, residual current circuit breaker (RCCB), having a sensitivity current up to 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supplying and fixing 6 - 32 amps rating, 240 Volts, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB complete with connectons, testing and commissioning etc as required.

Supplying and fixing 32 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Four pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 amps rating, Four pole (Three phase and neutral) 415 Volts, residual current circuit breaker (RCCB), having a sensitivity current up to 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required.

Supplying and fixing 4 pole MCB metal enclosure on surface / recess, complete with earth bar, din bar, detached gland plate, interconnection, phosphetized and powder painted including earthing etc. as required.

Charges for removing metal enclosures, old Distribution board with MCB, RCCB, & other accessories without any damage and making good the damages of the wall including painting, etc. as required.

Removing of switch board of any size including wires, switches(modular/piano type) switch board, ,fan regulators,clamps, GI/plastic box etc. as required and handing over to the store/yard.

Removing of submain wiring including conduit, wires, clamps etc. as required and handing over to the store/yard.

Charges for removing the existing 2.5/4/6 sqmm cable from surface/recess including all junction box/ and accesories without making damages, making good the damages of the wall / floor including painting as per the site conditions and conveyance of the material to the godown etc, as required.

Sivaprathapan KB (BID ID -3178842)

JAITECH ENGINEERS (BID ID -3178839)