Material supply for workshed ward 7 in Villiappally Grama Panchayat under MGNREGA Annual Plan 2024-25

Amount

NREGS WORKSHED MATERIAL SUPPLY

Stone for masonry work

Portland cement

Coarse sand( zone III)

laterate stone of size 40x20x15 cm

structural steel such as tees,angles,channels, and R.S joists

Red oxide zinc chromate primer

Adjustable telescopic prop 3 m(2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Stone aggregate(single size): 20mm nominal size

Stone aggregate(single size): 10mm nominal size

Hire charges of concrete mixer 0.25 to 0.40 cum with hopper

vibrator (needle type 40 mm)

Twisted steel/deformed bars

Mild steel tubes hot finished welded type

Welding by electric plant

GI trafford profile sheet 0.35mm thick

Bitumen washer

Stainless steel screws 50mm

Anjili wood scantls

Anjili wood planks

Fine sand (zone IV)

Rolling shutter made of 80x1.25 mm machine rolled laths

Top cover for rolling shutters 1.25 mm thick

27.5 cm long wire spring grade no 2 for rolling shutters

Vitreous china orrisa type w.c pan size 580 mm

Flushing cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Stone aggregate(single size): 40mm nominal size

Water thinnable cement primer for interior wall surface, having VOC content less than 50hms/litre

Acrylic exterior paint

Exterior primer

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm x 58 mm x 1.9 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Float glass sheet of nominal thickness 4 mm (weight not less than 10kh/sqm)

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm