Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹26.6 Laccepted-aoc | ₹26.6 L | accepted-aoc |
Tender Value
₹37.9 L
EMD Value
₹76,000
Closing Date
8 Apr 2026, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
Re-Conditioning, Operation and Annual Maintenance of Streetlights at Basavakalyana, Humanabhadh Industrial Area, Bidar District.
KIADB/2025-26/EL/WORK_INDENT288/CALL-2
KIADB/2025-26/EL/WORK_INDENT288/CALL-2
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
₹950
₹76,000
8 Apr 2026
25 Mar 2026
9 Apr 2026
4 Apr 2026
Re-Conditioning, Operation and Annual Maintenance of Streetlights at Basavakalyana, Humanabhadh Industrial Area, Bidar District.
PART A: Repair & Re-Conditioning
1.1 kV, LT Aerial Bunched Cable, XLPE
insulation confirming to IS-14255: 1995 3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral) with all lead ...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm with all lead and lifts complete as per...
Cable trench excavation, 1000x0.6x1=600, Ordinary soil In ordinory soil with all lead and lifts complete as per specifications and direction of Engineer in charge of the work.
Refilling and consolidation
with all lead and lifts complete as per specifications and direction of Engineer in charge of the work.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 100 Amps with all lead and lifts complete as per specifications and direction...
Supply and fixing of Heavy Duty Copper Terminal Long Barrel. 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm with all lead and lifts complete as per specifications and direction of Engineer in charge of the ...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. with all lead and lifts complete as per sp...
Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 with al...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. with all lead and lifts complete as per...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supply & installatioon of CCMS-10KVA, Rated Input voltage, 240 Volts & 415V AC, 50Hz, KVA Rating upto 10KVA, Current rating - 12A/24A/32A (Single & Three phase), connection single three phase-2 wire /...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. with all lead and lifts comp...
Supplying and fixing angle iron frame work fabricated out of MS angle iron..and MS flat…with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6m...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including coping/footing of the pole. with all lead and lifts complete as per ...
a)GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg b)Good Quality well burnt Charcoal for grounding p...
Fixing of GI grounding Pipe type earthing B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs with all lead and lifts c...
Supply of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm with all lead and lifts complete as per specifications and direction of Engineer in charge of the work
Supply of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class with all lead and lifts complete as per specifications and direction of Engineer in charge of the work
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site Normal soil 5/6'' Bore with all lead and lifts complete as per specifi...
Part-B : Operation and Maintanance of street lights
Operations and Annual maintenace of LED street lighting system including replacment of damaged /failed /fused out components like LED drivers , LED...
Operations and Annual maintenace of street lighting system including replacment of damaged /failed /fused out components like Lamps, Chokes, Ignitors, Capacitors, Swithches, Wires,Holders, Starters a...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid document.pdf
Tender Document • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .