FURNISHING AND ANCILLARY WORKS (I.E. SPORTS LIGHTING, WOODEN SPORTS FLOORING, UPS ETC.) FOR MULTI PURPOSE HALL AT PARADE GROUND DEHRADUN

Amount

DSR Item- 2.1 Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

DSR Item- 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

DSR Item- 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

DSR Item- 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

SOR Item- 3-4 Construction of embankment with approved material obtained from borrow pits cu.m (including cost of compensation for earth taken from private land) with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause

DSR Item- 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR Item- 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe 500D or more

DSR Item- 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

DSR Item- 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for :

DSR Item- 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

DSR Item- 5.9.3 Suspended floors, roofs, landings, balconies and access platform.

DSR Item- 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

DSR Item- 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

DSR Item- 10.30.2 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes

DSR Item- 16.86 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.With granite stone of area less than 0.50 sqm. sqm

DSR Item- 13.1.2 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

DSR Item- 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter metre 305.05

DSR Item- 13.45.1 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm

DSR Item- 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

DSR Item- 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

NSI Item- Providing and installing 20mm maple wooden flooring providing & laying MFMA Accredited American Hard Maple of 20mmx57/83mm widthxrandom Length 300mm onwards tongue & grooved for concealed fastening with cleats at every uncture with the pine runner (moistuure contents<14) of 68x38x900/1200mm cushion pad fixed at every joint of the runner & at 330 centre to centre. the full build up will be of 94/95 wich will laid on 6 mil thick plastic sheet (HDPE)as moisture barrier.

NSI ITEM- Acoustic Treatment on Ventilation Ducting: Providing and fixing of approved color on 19 mm thick acoustic board of approved NRC of 0.92 NRC with a destiny of 400KG/M3 with the spread frame at termination /10 min with a FR report on basis of Class-I & also the spread frame at 1.5 min should be nil as per FR Test Reports The Acoustic Board Will be fixed to the frame of 45 mm x45x0.4mm with stud at 600mm x600mm center to center or as per site requirment. the center to be filled with 50mm thick polyster fiber insulation with Anti-Vibration Pads (Wherevere Require)

NSI Item- Supply and Fixing of Stadium Chairs without Stand specifications and dimensions as Weight 1600 to 1650 gm Thickness 4.5 mm to 5 mm H 400 mm X W 430 mm X D 440 mm With water hole for rainwater. Special features 12 ribs of 5 mm each for extra strength.

NSI Item- Supply and Fixing of Stadium Chairs with Stand specifications and dimensions as Weight 1600 to 1650 gm Thickness 4.5 mm to 5 mm H 400 mm X W 430 mm X D 440 mm With water hole for rainwater. Special features 12 ribs of 5 mm each for extra strength. MOUNTING SYSTEM This model is mounted directly on the tread or with powder coated stand to treads or risers providing uniform seat centers and perfect aisle alignment. Stand is mountedto the sub-structure with a M 8 or M 10 fasteners anchors.

NSI Item- Fencing consisting of MS hollow pipe section, MS flat and G.I. chain link fencing painted with approved quality of two coast enamel paint one coat of primer

ELECTRICAL NSI Item- Supply and fixing of DAIKIN 1.8Ton single wall Mounted (Heat Pump) Air Conditioner -Split AC Hot & Cool 4 Way Air Swing ,Pre-coated Aluminium Fins ,Auto Restart,On/Off Timer with Advanced Start-up,2 TR Capacity ,power supply of 50 hz, 230 v, 1 phase and has power consumption of 2028 watts, Indoor unit ( width : 1050 mm , depth : 220 mm, height : 290 mm, net weight : 12.9 kg,) Outdoor unit ( width : 792 mm , depth : 299 mm, height : 600 mm, net weight : 45 kg) complete in all aspects as per direction of Engineer in Charge

NSI Item- Supply and fixing of UPS 3 phse incoming and 3 single phase outgoing 60 KVA

NSI Item- Supply of hot dip galvanized mounting arrangments with nuts. Bolts and washers. No welding permitted on site.

NSI Item- Supply and installaion of 75000 luments, 500W indoor hall glare free (without external honeycomb) sports lighting fixtures. Power rating as fowwos: CRI > 70 Power Factor : 0.99 Colour Temperature : 5700K Brand: USL, Philips, Bajaj or equivalant Sports Lighting (Contractor shall submit the design for achieving 2000 lux level and according the design lights shall be installed).

NSI Item- Supply and installation of 75000 lumens, 500w indoor hall glare free (With external Honeycomb) sports lighting fixtures. Power rating as Follows: CRI > 70 Power Factor : 0.99 Colour Tempreture: 5700k Brand: USL, Philips, Bajaj or equivalant Sports Lighting (Contractor shall submit the design for achieving 2000 lux level and according the design lights shall be installed).