Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-AOC VPO BARI TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 175013 | ₹3.1 L | L1 | Accepted-AOC Bidder Lower side amount |
| 2 | L2₹3.5 L+₹42,239.30 (13.7%)Rejected-Finance VILLAGE PO BARMAR TEHSIL JAWALI DISTT KANGRA HP | ₹3.5 L+₹42,239.30 (13.7%) | L2 | Rejected-Finance Bidder Higher side amount |
| 3 | L3₹4.0 L+₹92,099.30 (29.9%)Rejected-Finance HIMACHAL PRADESH HP | MANDI | HIMACHAL PRADESH | 175047 | ₹4.0 L+₹92,099.30 (29.9%) | L3 | Rejected-Finance Bidder Higher side amount |
| 4 | L4₹4.4 L+₹1.3 L (42.6%)Rejected-Finance HOUSE NO 18 1 DHOBIGHAT ROAD NEAR DC OFFICE WARD NO 12 SOLAN DISTT SOLAN H P 173212 | SOLAN | SOLAN | HIMACHAL PRADESH | 173212 | ₹4.4 L+₹1.3 L (42.6%) | L4 | Rejected-Finance Bidder Higher side amount |
| 5 | L5₹4.4 L+₹1.3 L (43.5%)Rejected-Finance | ₹4.4 L+₹1.3 L (43.5%) | L5 | Rejected-Finance Bidder Higher side amount |
| Sl No | Description | Qty | Unit | SUBASH CHAND L2 | Aman Deep L1 | SATISH KUMAR L3 | ASHOK KUMAR L6 | ROHIT VERMA L4 | ARADHYA ELECTRICAL WORKS L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as directed within all leads & lifts as per entire satisfaction of Engineer in charge. | 24.3 | Cum. | 130 ₹3,159 | 99 ₹2,405.7 Lowest | 230 ₹5,589 | 240 ₹5,832 | 240 ₹5,832 | 230 ₹5,589 |
| 2.00Dismantling in trenches galvanised mild steel tube, tube fitting (light grade)(earth work in trenches to be measured and paid for separately ) including entire carriage of materials within all leads and lifts as per direction of Engineer -in- Charge of the following nominal bores. | |||||||||
| 2.10 | 125 mm dia | 54 | Rmt. | 55 ₹2,970 | 39 ₹2,106 Lowest | 50 ₹2,700 | 50 ₹2,700 | 55 ₹2,970 | 95 ₹5,130 |
| 2.20Re-laying,jointing and testing of galvanised mild steel with intermediate circumfesential butt welded joints of below mentioned dia and class i/c.cost of flange,bends,tees etc. The fixing of M.S.Flanges as per IS-814:1967 should be done on both faces to make the joint leak proof and capable withstand the required Hydraulic pressure. The flanges should conform 6392-1971 with specified number and size of M.S.nuts and bolts as per Table mentioned below and ISI-MarkedSBR rubber flange gasket not less than 3mm.thick(Excavation in trenches etc.to be measured and paid for for separately). | |||||||||
| 3.00 | 125 mm dia | 54 | Rmt. | 65 ₹3,510 | 39 ₹2,106 Lowest | 140 ₹7,560 | 140 ₹7,560 | 150 ₹8,100 | 95 ₹5,130 |
| 4.00Providing and fixing M.S. flanges Table-5 confirming to BIS-6392-1971 latest with up to date amendsments including nuts and bolts and 3mm thick rubber gasket. Flanges to be welded with double layer on outer side and single layer on inner side as per BIS:816-1965 latest with up to date ammendsments including all leads and lifts of materials as per the direction of Engineer -in- charge. | |||||||||
| 4.10 | 125 mm dia | 2 | Pair | 1,600 ₹3,200 | 1,499 ₹2,998 Lowest | 1,800 ₹3,600 | 2,000 ₹4,000 | 2,150 ₹4,300 | 2,200 ₹4,400 |
| 5.00Providing and fixing of Cast Steel Sluice valve of following dia and class conforming to BS-1414,API 600, Class-300 dully flanged ISI marked of Kirloskar Make including cost of nut bolts, synthetic rubber sheet 4mm thick of Champion Make complete in all respect as per the directions and satisfactions of the Engineer-in-Charge. | |||||||||
| 5.10 | 100 mm dia | 1 | Nos. | 45,000 ₹45,000 | 39,999 ₹39,999 Lowest | 50,000 ₹50,000 | 50,000 ₹50,000 | 50,000 ₹50,000 | 66,500 ₹66,500 |
| 5.20 | 80 mm dia | 2 | Nos. | 32,000 ₹64,000 | 26,999 ₹53,998 Lowest | 35,000 ₹70,000 | 38,000 ₹76,000 | 38,000 ₹76,000 | 35,400 ₹70,800 |
Tender Value
₹5.0 L
EMD Value
₹9,970
Closing Date
20 Mar 2026, 11:00 amClosed
Er Anandblouria
Jal Shakti Division Nurpur
Providing and fixing of cast steel Sluice valve, Main switch dismantling and relaying of 125mm dia G.I. pipe etc) ( UNDER PDNA)
2026_HPIPH_131175_1
EE-NPR-Tender-6817-21 dt 11-03-2026
Open Tender
Civil Works
Item Rate
90 days
Rit Baranda
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
₹9,970
27 Jul 2026
11 Mar 2026
20 Mar 2026
11 Mar 2026
20 Mar 2026
11 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as directed within all leads & lifts as per entire satisfaction of Engineer in charge. | 24.3 | Cum. | - | - |
| 2Dismantling in trenches galvanised mild steel tube, tube fitting (light grade)(earth work in trenches to be measured and paid for separately ) including entire carriage of materials within all leads and lifts as per direction of Engineer -in- Charge of the following nominal bores. | |||||
| 2.1 | 125 mm dia | 54 | Rmt. | - | - |
| 2.2 | Re-laying,jointing and testing of galvanised mild steel with intermediate circumfesential butt welded joints of below mentioned dia and class i/c.cost of flange,bends,tees etc. The fixing of M.S.Flanges as per IS-814:1967 should be done on both faces to make the joint leak proof and capable withstand the required Hydraulic pressure. The flanges should conform 6392-1971 with specified number and size of M.S.nuts and bolts as per Table mentioned below and ISI-MarkedSBR rubber flange gasket not less than 3mm.thick(Excavation in trenches etc.to be measured and paid for for separately). | - | - | - | - |
| 3 | 125 mm dia | 54 | Rmt. | - | - |
| 4Providing and fixing M.S. flanges Table-5 confirming to BIS-6392-1971 latest with up to date amendsments including nuts and bolts and 3mm thick rubber gasket. Flanges to be welded with double layer on outer side and single layer on inner side as per BIS:816-1965 latest with up to date ammendsments including all leads and lifts of materials as per the direction of Engineer -in- charge. | |||||
| 4.1 | 125 mm dia | 2 | Pair | - | - |
| 5Providing and fixing of Cast Steel Sluice valve of following dia and class conforming to BS-1414,API 600, Class-300 dully flanged ISI marked of Kirloskar Make including cost of nut bolts, synthetic rubber sheet 4mm thick of Champion Make complete in all respect as per the directions and satisfactions of the Engineer-in-Charge. | |||||
| 5.1 | 100 mm dia | 1 | Nos. | - | - |
| 5.2 | 80 mm dia | 2 | Nos. | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
form06.pdf
Tender Documents • 0.61 MB
termsandconditions.pdf
Tender Documents • 0.19 MB
BOQ_193953.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .