Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC | ₹1.3 Cr | L1 | Accepted-AOC Award |
| 2 | L2₹1.4 Cr+₹10.2 L (8.00%)Rejected-Finance VILL SAKRAH PO CHAMBI TEHSIL SUNDERNAGAR DISTT MANDI HP | SUNDERNAGAR | MANDI | HIMACHAL PRADESH | ₹1.4 Cr+₹10.2 L (8.00%) | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹1.4 Cr+₹12.7 L (10.0%)Rejected-Finance R O WARD NO 5 BRIJ NAGAR TEHSIL DISTT HAMIRPUR HP | ₹1.4 Cr+₹12.7 L (10.0%) | L3 | Rejected-Finance Other than Lowest |
| 4 | L4₹1.7 Cr+₹40.4 L (31.8%)Rejected-Finance | ₹1.7 Cr+₹40.4 L (31.8%) | L4 | Rejected-Finance Other than Lowest |
| 5 | L5₹1.9 Cr+₹62.9 L (49.5%)Rejected-Finance A R AND M O ON VARIOUS ROAD IN SECTION NALAGARH 1 UNDER NALAGARH SUB DIVISION SH HIRING OF JCB | ₹1.9 Cr+₹62.9 L (49.5%) | L5 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | Chandan Parkash L4 | Nishant Puri Govt Contractor L1 | Manoj kumar L5 | KUSHAL SINGH RAGHAV L2 | NISHAT KUMAR L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Cutting in earth work and disposal of excavated earth in all kinds of soil in pick work, jumper work and blasting work complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts | 1,309.5 | Cum | 380 ₹4,97,610 | 248 ₹3,24,756 Lowest | 470 ₹6,15,465 | 355 ₹4,64,872.5 | 450 ₹5,89,275 |
| 2.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 356.92 | Cum | 470 ₹1,67,752.4 | 298 ₹1,06,362.16 Lowest | 370 ₹1,32,060.4 | 395 ₹1,40,983.4 | 336 ₹1,19,925.12 |
| 3.00 | Providing, Laying, Jointing & testing of MS pipe (by way of circumferential butt welded joints by electrical arc welding) and testing of MS pipe of following dia meters confirming to ISO 3183-2007, steel grade specified below (latest with upto date amendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/tapers, all short pieces, beds etc. as per site requirement made from parent tubes The laying of pipe will include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). 450 mm diameter MS Pipe (L-290 or X-42) 4.80 mm thickness | 970 | Rmt. | 13,854 ₹1,34,38,380 | 9,400 ₹91,18,000 Lowest | 15,830 ₹1,53,55,100 | 10,025 ₹97,24,250 | 10,500 ₹1,01,85,000 |
| 4.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) in all leads and lifts. | 18.79 | Cum | 6,500 ₹1,22,135 Lowest | 6,800 ₹1,27,772 | 6,700 ₹1,25,893 | 7,395 ₹1,38,952.05 | 7,200 ₹1,35,288 |
| 5.00 | Centering and shuttering including strutting, propping etc and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. in all leads and lifts. | 564.33 | Sqm. | 200 ₹1,12,866 Lowest | 310 ₹1,74,942.3 | 380 ₹2,14,445.4 | 375 ₹2,11,623.75 | 450 ₹2,53,948.5 |
| 6.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size in all leads and lifts. | 203.88 | Cum | 7,400 ₹15,08,712 Lowest | 9,500 ₹19,36,860 | 7,900 ₹16,10,652 | 9,895 ₹20,17,392.6 | 8,200 ₹16,71,816 |
| 7.00 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
in all leads and lifts. | 10,710.38 | Kg. | 83 ₹8,88,961.54 Lowest | 85 ₹9,10,382.3 | 87 ₹9,31,803.06 | 95 ₹10,17,486.1 | 95 ₹10,17,486.1 |
Tender Value
₹2.0 Cr
EMD Value
₹2.7 L
Closing Date
16 Sept 2025, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Providing Laying jointing and Testing of MS pipe 450mm dia for Gravity Main in damaged portion near RD Industry Skor and C/o Thrust Anchor Blocks to protect the gravity Main
2025_HPIPH_114038_1
7831-7930
Open Tender
Pipe Laying Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹5,000
₹2.7 L
14 Oct 2025
6 Sept 2025
17 Sept 2025
6 Sept 2025
16 Sept 2025
6 Sept 2025
Amount
Cutting in earth work and disposal of excavated earth in all kinds of soil in pick work, jumper work and blasting work complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Providing, Laying, Jointing & testing of MS pipe (by way of circumferential butt welded joints by electrical arc welding) and testing of MS pipe of following dia meters confirming to ISO 3183-2007, steel grade specified below (latest with upto date amendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/tapers, all short pieces, beds etc. as per site requirement made from parent tubes The laying of pipe will include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). 450 mm diameter MS Pipe (L-290 or X-42) 4.80 mm thickness
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) in all leads and lifts.
Centering and shuttering including strutting, propping etc and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. in all leads and lifts.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size in all leads and lifts.
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level in all leads and lifts.
KUSHAL SINGH RAGHAV (BID ID -555098)
NISHAT KUMAR (BID ID -556423)
Chandan Parkash (BID ID -556449)
Manoj kumar (BID ID -557026)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .