GENERAL Providing HT UG Cable APFC in Sainik School Providing HT UG Cable HT Metering cubicle APFC panel and repair of MSB in Sainik School Kazhakkuttom General Electrical Work Providing HT UG Cable APFC in Sainik School General Electrical Work

Amount

HT Cabling

OD230415/2023-2024:Supplying Installation testing and commissioning of outdoor, extendable type (to either side ), out door type, free standing SF6 gas insulated SCADA compatible Ring Main Unit suitable for operation at rated voltage of 12 KV, made of sheet steel having ingress protection of IP 54 or above, conforming to IEC60376, type tested, 630A continuously rated busbar, including following incoming modules and feeder modules with facility of ON / OFF / EARTH indication, with self powered microprocessor based IDMT relay having 3 O/C,1 E/F releases & built-in lockout relay, sealed maintenance free battery(Minimum 12V, 26 AH - 2 Nos) and battery charger unit, cable entry boxes (suitable for terminating 3 x 300 sq.mm A2xFaY cable) complete in all respects mounted on base GI Channels with anchor/ foundation bolt holes for installation upon suitable size cement concrete foundation as required. The System shall be complete in all respects with auxiliaries such as SF6 pressure gauge/ manometer, voltage indication lamps, interlocking arrangement etc. as per statutes, recommendations and in supervision of KSEBL including obtaining statutory Energisation approval from Electrical Inspectorate etc. as applicable. A) Incoming Modules (Load break Swith- C) 12kV, 630A, 21 kA SF6 gas insulated electrically operated load break switch with remote tripping facility-2 Nos. B) Feeder Module (Circuit Breaker T2) 12 kV, 630A, 21kA electrically operated vacuum circuit breaker(SF6 gas insulated) with remote tripping and earthing switch -1 No.

OD100445/2023-2024:Supply,Conveyance,Installation,testing,and Commissioning of Out door type IP 54 rated OUT DOOR Metering panel made of 2 mm thick CRCA sheet powder coated after 7 tank process with canopy consisting 11kv, 630amps, 350MVA, 3ph, 50hz load break swith , HT HRC fuses, earth switch, Mechanical interlocks, 0.2s CT/PT of required ratio as suggested by the KSEB, thermal sensor with space heater, 0.2s -/5A or -/1 A HT TOD meter as per present KSEB standards KSEB sealing facility as required

OD100448/2023-2024: Supply & laying of one number 3 core 300 sq mm stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

90.12.12.9:Supply & laying of DWC pipe in ordinary soil 1.2 m below ground level including excavation145/123 mm or nearest size

OD100447/2023-2024:Supply & laying of one number 3 core 300 sq mm stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3KA for I sec.) cores laid up. inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS: 7098 part II 1985 with latest amendments duly clamped in position using painted MS clamps as required.

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.16.3.3:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm GI strip

10.4.4:Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

10.5.4:Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD100449/2023-2024:Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD100450/2023-2024:Painting letters or figures of the 2.50 cm, 4 cm or 5 cm height sizes with enamel paint as identification mark to SB, DB, panel board etc as required

OD100451/2023-2024:Supply and providing 102mm Round cable route marker set complete, cast iron, spike and inscription L.T/HT Cable in ground as required.

OD100452/2023-2024: Supply and providing MS Chequered plates of suitable thickness including cutting, welding, painting etc as required.

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

OD100453/2023-2024:Providing and fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete

OD100454/2023-2024:Providing and fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete

OD100455/2023-2024:Providing and fixing following intelligent automatic power factor controller 8 stage 440/110V 5/1A existing panel and giving connection complete

OD100456/2023-2024:Providing and fixing 400/5 A, 10 VA, accuracy class 0.5, Tape wound Metering CT existing panel and giving connection as required

OD100457/2023-2024:Providing and fixing following multi function meter to read: V, A, F,& PF 3 phase accuracy class 1 in existing panel and giving connection complete

OD100458/2023-2024:Supply and providing Panel mounting fresh air fan150 mm as required

90.12.7.34:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.12.5.34:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 185 sq mm

90.12.7.30:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.10.7:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation120/102.5 mm or nearest size

90.14.10.12:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.13:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.17:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

OD100459/2023-2024:Supply and providing single pole over current earth fault relay [ IDMT and definite time characteristics ] giving connection as required

90.14.11.12:MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.

90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

90.14.11.15:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

OD100460/2023-2024:Supply and providing manual Call point break glass type with hammer and chain as required

9.1.27:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

OD100461/2023-2024:Supply, fixing and giving connection of 40 / 50 / 63 A four pole, 415 volts, MCB in the existing DB

90.14.24.31:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor.

90.14.24.34:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.10 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor.

90.14.24.37:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.20 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor.

90.14.24.42:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel without block reactor.

OD100462/2023-2024:Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 5 kVAR with AC Coil, in the existing panel board and giving connection.

OD100463/2023-2024:Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 10 kVAR with AC Coil, in the existing panel board and giving connection.

OD100464/2023-2024:Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 20 kVAR with AC Coil, in the existing panel board and giving connection.

OD100465/2023-2024:Supply, fixing and giving connection of 32 A 2 Way Neutral Link mounted on DMC/SMC base

OD100466/2023-2024:S & P Flush head actuator - Red with legend "STOP" with 1 NC contact.

OD100467/2023-2024:S & P Illuminated flush head actuator - Green with legend "ON" with 1 NO contact.

OD100468/2023-2024:Supply and providing ABC type fire extinguisher 6 kg capacity with installation brackets conforming to IS 15222 as required.

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.1.5:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)

90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

90.16.5.5:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG)

OD100469/2023-2024:Copying charges of Electrical/fire Drawing per A 3 sheet additional copies

OD100470/2023-2024:Charges for preparation of Electrical/fire Drawing per A 3 sheet first copy

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

D SURESH