Retender -Annual Plan- Pro.No.71/25-Block Panchayat office Renovation- Electrification -CDLM BP.- Electrification General Electrical Work

Amount

Renovation-Installation of Outdoor Lightning .

90.2.1.15:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Long Point

90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

90.3.18.4:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.50 mm dia with clamps made from 25 x 3 mm MS flat

90.6.5.18:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 1.50 sq mm

90.12.1.13:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 6 sq mm

90.12.7.13:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

OD279448/2025-2026:Supply, conveyance, installation, testing and commissioning of 200 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die- cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuses for higher impact strength and optimum light transmission, High efficient driver with short circuit, over voltage, over current and thermal protection, Surge protection up to 5 K V, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor flex wire etc. as required The LED fittings shall be guaranteed for 3 years from the date of commissioning from any defects in manufacturing. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Compton/ Havells )

OD279446/2025-2026:Supply, conveyance, installation, testing and commissioning of 150 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuses for higher impact strength and optimum light transmission, High efficient driver with short circuit, over voltage, over current and thermal protection, Surge protection up to 5 K V, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing arm and giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranteed for 3 years from the date of commissioning from any defects in manufacturing. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Compton/ Havells )-150 Watt Flood light

OD279472/2025-2026:Supply, convey, installation, testing aancend commissioning of 120 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuses for higher impact strength and optimum light transmission, High efficient driver with short circuit, over voltage, over current and thermal protection, Surge protection up to 5 K V, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing arm and giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranteed for 3 years from the date of commissioning from any defects in manufacturing. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Compton/ Havells )- 120 Watt Flood light

OD279456/2025-2026:Supply Conveyance, installation, testing and commissioning of 60W LED Flood /street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD279447/2025-2026:Supply and providing Single dial timer unit Digital type with contactor and relay

OD279449/2025-2026:PVC Gland for cable Size 4X6 mm.

OD279450/2025-2026:Pole Mounted Rectangular Sintex PVC Junction Box of size 300X200X100.

OD279453/2025-2026:Pole Mounted Rectangular Sintex PVC Junction Box of size 200X140X95 mm as required.

OD279452/2025-2026:Providing and laying in position cement concrete 1:3:6 ( 1cement:3 coarse sand:6 graded stone aggregate 40 mmnominal size) in foundation of Street Light/DG Set./Mini mast Light etc. including form work etc as required.

HARIKRISHNAN G (BID ID -2394943)

Bidder Name

HARIKRISHNAN G

ABHIJITH V S